@@jsummss It sounds like you have not downloaded all the new updates. Please do so and activate the feature, or you are not on the right Tesla software version. Please read the release notes.
What I'd really like to see is a combination of LED lightstrip and route information. So I get notified visually if a left or right turn is approaching, may be using the front lightstrip as a progess bar, that get's shorter, the nearer the upcoming turn gets (or compare VW ID models, where it flashes to the side you have to turn). It would really help, since a lot of people use the navigation in silent mode. Thank you for your great work!
It's astonishing to actually realize what your buttons and knob does for my 2024 model three Highland. It makes the car a pleasure to drive even more. thank you thank you thank you so much for what you're doing. In my opinion, this is the best and smartest upgrade you can do to any TESLA.
I dont know if this was already commented but its a suggestion for the ambient light strip. If you could implement the feature where you accelerate quickly the lights turn red and starts from the middle and goes away from it. And when you are regening or hard braking it turns blue or green and goes towards the middle. I believe i saw this in Mercedes EQ cars. 2:53
Smart action to set wiper maintenance mode on after parking. Would be great in winter to have wiper higher position so they would get the needed heat on the older model 3.
Got my knob and commander a couple days ago. Picked up my M3P yesterday. Installed knob and commander last night. The ability to manually precondition was enough for me but everything else is amazing. Thanks so much, from Australia!
It would be great if the nag alert for the autopilot on model 3 highland could be configured to always be full brightness even during the day, like it was upon first release. Sometimes the led bar is so dim that the flashing is hardly noticeable
Haven’t try with mine (commander is temporarily uninstalled for service, HW4 dead) but maybe they could figure a calibration setup where you manually move the “calibrated center” if it can be fixed by software.. I don’t know how small are the addressable the strip is
Amazing update, great to have the new lightbar features. However in my car the split between the left/right indicators is not in the centre of the car. So when i indicate left too much of the bar illuminates and when i indicate right too little activates
For us up in the cold north. I would really appreciate the possibility to put the windshield wipers automatically in service mode when it is below freezing. And from a button aswell
You could add an additional function to thank: put the left indicator then the right indicator then the left indicator again and the right indicator again very quickly.
@@EnhanceAuto-S3XY_Gadgets in the Netherlands it's the same as mentioned in the orignal comment. Alternating between direction and not at the same time. Same time could be seen as a warning instead of a thank you.
Guys, if you can segment the Highland interior light. Do more with it. For example: When you are charging car, the lightstrip graudally lights up as the battery gets charged (e.g at 10% only bit behind the center screen is on, at 50%, its all the way on the driver door, when its 100%, it lights up the rear as well Look at what mercedes benz EQE has with the interior mood lightning. I thought it has to be always just one color.. if not, possibilites are endless
@@EnhanceAuto-S3XY_Gadgets guys I have a feedback - on model 3 highland SR, the ambient light flashing on turn signal (red/green based on blindspot) is not centered. Its uneven. If you turn on the left turn signal, you can see, that the color does not stop directly in the middle (behind the tablet screen) but rather at its right border i can provide video of that
@@EnhanceAuto-S3XY_Gadgets would it be possible to show the info (like max regen, but everything that is possible in app) also on the knob? Recently I noticed that the battery temp can be set to be always shown on the knob and I would like to be able to set also other infos on the Knob - so similar to the app, to be able to choose not only Actions but also Info values.
Thanks for yet another great update! :) Two wishes for the audio volume settings to be added in the commander: #1 Lower the volume when the car is put in reverse for better concentration #2 Make it possible to define a default sound level when the car/system starts. It seems the audio starts out at the same level as when the car was turned off last time and often you don't want to start out on the same adio level. If you heard loud music when you drove back last evening it doesn't necessarily mean you want to start your morning drive at the same level.
I wish for a new product you would release a light bar for all the Model 3 and Y owners that links to the commander so we can have the features of the highland model!!
I love the feature of pressing and holding the door handle to open the frunk. But if you could pair the action with the interior door button, that would be brilliant! So next the time when I get off the car I could also open my frunk.
@@stephenchew i dont see the need for this. holding down the driver door open interior button is to unlock all passenger doors that's the tesla default. in fact if you're already in the car; the open frunk feature is always on the 25" screen. is there any issue that you personally have with touching that button?
@@minhly4 I wasn't aware of the Tesla default, but I suppose opening driver's door would also unlock the rest of the door? My point of view is convenience - the frunk button on-screen is greyed out when the car is locked, but I don't need to press the unlock button if I open the driver's door, so I could carry out 2 actions with one hand. Similar line of thought where the screen has unlock all doors button but holding down the button unlock all door, isn't it? 🙂
Is there a way continue battery preconditioning if you aren’t in the car? Like if the car is parked outside in the cold and unplugged? It would be nice to have the battery preconditioned for max charging speed when traveling.
Brilliant update thanks. It would be helpful if you can add Joe Mode - Tesla still hasnt fixed the bug where it stops working even though its toggled on in the settings. I'd love a macro where every time I get it, it toggles off and then on again to ensure its working properly. Thanks!
Picked up a Commander and Knob recently and am loving it so far but was surprised not to see rear defrost and the AUTO steering wheel heat option. Would love if those could be added!
Welcome to the club! The rear defronst is giving us headaches, so we have removed it. About the Auto steering wheel heat otption- you want it to work as follow - Off, 1 , 2 , Auto?
I would buy one knob + Commander v2 if you implemented a mobile Dashboard that shows the road marks and the vehicles around, as well as the directions, thats more helpful when driving than stats
Please add a custom action to call any website/api. I have f.e. a gate I can open when I call website just with some parameters, it would be great to have this option to automate things like this.
Installed the new update last night and tested it out today. Love the new ambient lighting split between left and right. Question: the “split” between the left and right is roughly in front of the of the right side of the screen, or not in the middle of the windshield. Is this just the way the strip is split physically ?
Great new improvements! Kudos behind bringing the updates in just 4 weeks! I would still prefer to only have the doors in front blinking instead of half of the car. Or even only having the front strip blinking by halves in case there is a warning.
THANK YOU!! AWESOME!! Now I only need my screen to turn on dark mode when my headlights are automatically turned on! Parkings, tunnels... Please! I don't wanna be blinded at tunnels
Great update as usual. But...The LEDs do not split. The entire strip still lights for turn signals and blind spot. All products have been updated to current SW.
Thx for all these updates. Would it be possible to have a button action that register the dashcam automatically? I know you can do it with the klaxon, but it’s noisy. You can make it through vocal command too, but in emergency click command vocal + say the command isnt really relevant as you are focus on the current emergency.
First of all, I want to compliment you and say that your product is amazing and I enjoy every moment, the latest update is great, I just have a small problem, when I signal, the color distribution in the lighting strip is not divided exactly in the middle but more like 60-40. Is there a solution to this? 3:00
Thanks so much for all of this updates. As a new userI am loving some of the extra features it gives my Model 3 Highland. Is there a better way to adjust the set autopilot speed such as matching what was seen with maybe an option to skip if a button is pressed?
Vous faites un travail fantastique, Tesla gagnerait à vous contacter pour établir un partenariat. Vos produits et la qualité sont de très haut niveau. Bravo à vous !
This is a feature that I have been waiting for. But I noticed that the split is not in the center. It seems to be slightly on the right side of the dashboard. I don't know if it's on purpose. In US, the driver is on left side which make right side status a bit harder to see if driver look straight front, especially in day time. I would say the split should be in the center or on driver's side if possible,not the opposite. Can you think about changing it in the future?
Everything excellent. The only part that needs correction is the strip light that when it blinks it seems that the right half is shorter than the left.
Merci pour cette mise à jour Serait il possible de supprimer le son lors de l'activation et la desactivation de l'autopilote ? Merci pour votre travail 👍
Great work! If it does not already exist, could you add a feature that automatically activates WiFi when you start driving so that the car connects to my mobile hot-spot. Currently WiFi seems get disabled by default and I must always turn it back on manually each time I start driving (or wait long for it to connect before engaging Drive mode.. too long). I am not talking about keeping an established connection in Drive mode, this is ticked and ok. I am saying avoid disabling WiFi in Drive mode if not yet connected to a mobile AP. Thanks!!!!!
I don’t have a Tesla yet and haven’t done much research but do you have an option that allows your hazard lights to strobe when activated instead of just blinking on / off? I think that would be a great additional for visibility.
@@EnhanceAuto-S3XY_Gadgetssorry not sure why my reply didn’t post. Yes that is correct. It would “stobe” twice then pause then repeat over and over again while activated. There is a relay on the market for some vehicles called “smart tap” that has this feature but is hardware based not software based.
Would love to see the sexy knob work with after market l.e.d's that are connected through the car can bus. That way we can use the same features that are available for the highland version.
I LOVE your products and will be buying for my brand new first Tesla, Model 3 performance. May I as where you got that phone mount clip for the steering wheel column? Thanks !
Thanks for your great job guys! Just add a commander and buttons to my highland M3 it's brilliant! Have some questions -why the auto max is not working on a highland? 😢 -the light strip is not separate in center, have a little part on the right and a big part on the left, it's not in the center even on driver's perspective -I add flash beam on a button one click and I can't put a action on the double click do you know why? Thanks and merry Christmas to your team!
Hi there. Thank you for your questions. 1. The AP max for highland was added with the last update. Please check 2. This is how Tesla has done it. It is not from us 3. Can you add any other action to a double press to that button, if it’s not high beam flash ? If the feature you have selected it by Cloud not by Commander, then you cannot add a second feature from another section. So only use features from the same group (by Commander )
I have two suggestions: one is to provide an easy entry mode upon which the windows of any door opened drops like 1/3 of its height, just as a Mercedes EQE does, as it adds a lot of comfort, specially when the space is tight; the other one is to get functions to select the suspension modes in a Model 3 performance (I would like to have a page in my sexy knob just for driving - suspension, wheel, acceleration mode and traction control). Thanks for listening to the community and making the products even better. And a question: is there a way to program a button to use the horn just to thank someone?
Is it possible to make rear seats heater automatic turn on if some one is sitting there. The sensor should already be there as it recognize if someone is sitting there with buckling in. I'm owning model Y 2023 model and would love to see it. The code should be something like. If some is sitting i rear seat and buckled in and temperature is lower than 20 degrees Celsius put on seat heater.
Great feature with devided light strip!!! 😀👏🏻💯 Is it possible to have the light strip stay static with decided color and just start flashing red if a car is in the blind spot area, when using the indicators? No car in blind spot area = no flashing light strip, when using the indicators. Just the decided static color. With a car in the blind spot area = right or left part of the light strip flashes red when using the indicators, depending on what side the other car is on..
Please add a button function to split/sync HVAC!! Currently the split function is only in the temperature sub-menu. You have to change the temperature on both sides before even being able to click de-sync. Now the person who was fine has a different temperature than original.
Regarding the features: Pease make the brightness of the LED strip (Highland) adjustable on an event basis. E.g. i'd like hazard lights, blind spot warning and rainbow greeting always at full brightness.
After completing the update, unfortunately the ambient lighting hasn’t changed to just flash on one side when I indicate or in any other scenario. Is there a setting that I’m missing?
Wow congratulations!! Just a small detail.. when half part of ambient lights are showing, its not exactly in the middle.. its a bit displayed on the right. Would be awesome to adjust it so its split it in the middle ^^
@ ooh interesting! I think it would be nice to let us choose whether if we prefer it split or full! Just another toggle more :P Anyway you guys are awesome
Thanks for the Christmas update! For the next one could you add a knob action to turn on only the rear window defog? When only the rear window is fogged up I don’t need the ventilators to go into take-off mode 😅.
Hello since installing the latest version 4.12 the light strip no longer works for either the autopilot or the blind spot warning. on the other hand it is ok for the indicators (with the left right distribution). Is the same for you?
Thanks guys! 🎉 Would love the ability to restore power to the usb ports and the 12v/16v outlets that Tesla recently nerfed. I'd like to be able to power my fridge without using camp mode (which prevents auto door locking and leaves climate control on).
It will be so delicious if you make this function : I would love to see a MAX speed setting for Cruise Control, similar to the FSD Autopilot MAX speed. Are you working on this ?
Having left my phone in the car several times upon exiting, it may be an idea to have a reminder (say 3 beeps) when the drivers seat is empty, the door closed, and the phone still within distance, after a short time period. As most don't have the new interior lighting, it would be nice to be able to obtain one that can be fitted and compatible with the Knob. Would sell well I'm sure.
This is probably an edge case, but as a volunteer fireman it would be cool if you could strobe the headlights alternating left and right as well as the brake and reverse lights. I can dream right lol
Awesome update once again! Wondering if it would be possible to have the lightbar in a cascading effect when using the turn signals. Right now it's pulsating which is also great but dynamic/cascading to the side you're turning to would also be nice :)
Disable auto trunk open, when towbar is used, when I have bicycle rack on, I need to be carefull not to near me with my phone, because if the trunk opens it will be really ugly
I would like in the next update a way for non hyland user a way for easier blind spot notification. Can a sound be added so that we do not need to check the center console to see if there is trafic in the blind spot? Thanks
I have one suggestion: would it be possible to enable the commander to control more than 8 buttons? I have 10 buttons, but for some reason, I wasn't able to control the remaining 2 that can't be paired directly with the commander via cloud.
Eine tolle Automatisierung wäre, wenn die Bremsscheiben regelmäßig bei der Fahrt durch leichtes anlegen getrocknet würden. Des weiteren sollte auf den ersten 1-2km Fahrstrecke der Rekuperation abgeschwächt sein, um ein nutzen der Bremsen sicherzustellen. Viele Teslas haben bei einer Inspektion Mängel an den Bremsen, die auf eine zu geringe Nutzung zurückzuführen sind und sehr hohe Kosten verursachen können. DAS wäre eine Funktion, die viel viel € spart. A great automation feature would be if the brake discs were regularly dried during driving by lightly applying them. Additionally, the regenerative braking should be reduced during the first 1-2 km of driving to ensure the brakes are used. Many Teslas show brake issues during inspections due to insufficient usage, which can lead to very high costs. THAT would be a function that saves a lot of money.
Amazing work. Well done!! Love the feature of separating the led strip (i thought this was not possible due to testla software). Now go and get some rest, you deserve it!!
🎁Get 2 Free S3XY Buttons at enhauto.com🎁
@@jsummss It sounds like you have not downloaded all the new updates. Please do so and activate the feature, or you are not on the right Tesla software version. Please read the release notes.
@@EnhanceAuto-S3XY_Gadgets
i just purchased the M3 highland knob this week. Am I eligible for 2 free S3XY buttons?
What I'd really like to see is a combination of LED lightstrip and route information. So I get notified visually if a left or right turn is approaching, may be using the front lightstrip as a progess bar, that get's shorter, the nearer the upcoming turn gets (or compare VW ID models, where it flashes to the side you have to turn). It would really help, since a lot of people use the navigation in silent mode. Thank you for your great work!
That's a great idea!
Really cool idea
Yesss!
Maybe have only the drivers section (in front) be progress, left side of driver be left turn and right door right turn
It's astonishing to actually realize what your buttons and knob does for my 2024 model three Highland. It makes the car a pleasure to drive even more. thank you thank you thank you so much for what you're doing. In my opinion, this is the best and smartest upgrade you can do to any TESLA.
Thank you sooo much for this amazing comment!
I dont know if this was already commented but its a suggestion for the ambient light strip. If you could implement the feature where you accelerate quickly the lights turn red and starts from the middle and goes away from it. And when you are regening or hard braking it turns blue or green and goes towards the middle. I believe i saw this in Mercedes EQ cars. 2:53
Smart action to set wiper maintenance mode on after parking.
Would be great in winter to have wiper higher position so they would get the needed heat on the older model 3.
We hope to find a better way to do it next year :)
That's a genius idea! Especially here in Sweden during our long winters!
@ not likely to work in Sweden, not cold enough :)
@@raunomakela9226 It depends on where in Sweden you live. For example, in Malmö, we have yet to see snow.
Mine has already frozen a few times - Stockholm 😁
All former BMW owners will love this 😂😂😂😂 Genious!
Not just those haha. It is actually good against BMW drivers too, even if flashing is illegal here 😁
🤣
LOVE the "auto on" HVAC in the back! Gonna turn this on ASAP!
Glad you like it :)
Got my knob and commander a couple days ago. Picked up my M3P yesterday. Installed knob and commander last night. The ability to manually precondition was enough for me but everything else is amazing. Thanks so much, from Australia!
Congrats on the new car and welcome to the club 🙂
Thank you so much for the great work you are doing! ❤ Making our cars much better.
Thank you so much for your kind words!
Would it be possible to couple commander profiles to driver profiles?
Same request here!
Didn't think that would be possible, but would love that
I want this as well!
That’s so smart using the leds for driver warnings!!
Glad you like it 🙂
It would be great if the nag alert for the autopilot on model 3 highland could be configured to always be full brightness even during the day, like it was upon first release. Sometimes the led bar is so dim that the flashing is hardly noticeable
Got it
Thanks for the Update but in my Highland, the new option to flash the interior led on one side is not centered (offset to the right).
Haven’t try with mine (commander is temporarily uninstalled for service, HW4 dead) but maybe they could figure a calibration setup where you manually move the “calibrated center” if it can be fixed by software.. I don’t know how small are the addressable the strip is
@@OliToady Side question - would the presence of an ODB plug void the warranty?
The offset is due to Tesla's limitations, so the LED's split looks centered from the driver's perspective.
Amazing update, great to have the new lightbar features. However in my car the split between the left/right indicators is not in the centre of the car. So when i indicate left too much of the bar illuminates and when i indicate right too little activates
In video I see some nice phone holder behind the wheel - could you please share info about what accessory is it?
This was our old product, that we have stopped developing due to its complexity and high price. We will have a new version one day. :)
I was going to ask the same question
For us up in the cold north. I would really appreciate the possibility to put the windshield wipers automatically in service mode when it is below freezing. And from a button aswell
Unfortunately, with the current hardware this is not possible
You could add an additional function to thank: put the left indicator then the right indicator then the left indicator again and the right indicator again very quickly.
We have this one but with both indicators flashing 2 times at the same time. Is it different in your country ?
I already do that without automation trying to turn off the signal. Thanks highland! 😂
@@EnhanceAuto-S3XY_Gadgets in the Netherlands it's the same as mentioned in the orignal comment. Alternating between direction and not at the same time. Same time could be seen as a warning instead of a thank you.
In the UK the flash left then right is more common than hazards flashing@@EnhanceAuto-S3XY_Gadgetsoften in the
@@nielsvandenkieboom5034 So the first signal is towards the road, the second is towards outside of the road, and you do that 2 times?
Guys, if you can segment the Highland interior light. Do more with it. For example: When you are charging car, the lightstrip graudally lights up as the battery gets charged (e.g at 10% only bit behind the center screen is on, at 50%, its all the way on the driver door, when its 100%, it lights up the rear as well
Look at what mercedes benz EQE has with the interior mood lightning. I thought it has to be always just one color.. if not, possibilites are endless
This is smart! :)
@@EnhanceAuto-S3XY_Gadgets guys I have a feedback - on model 3 highland SR, the ambient light flashing on turn signal (red/green based on blindspot) is not centered. Its uneven. If you turn on the left turn signal, you can see, that the color does not stop directly in the middle (behind the tablet screen) but rather at its right border
i can provide video of that
Thanks for adding more "nerd specs" too!
❤ ❤ ❤
@@EnhanceAuto-S3XY_Gadgets would it be possible to show the info (like max regen, but everything that is possible in app) also on the knob? Recently I noticed that the battery temp can be set to be always shown on the knob and I would like to be able to set also other infos on the Knob - so similar to the app, to be able to choose not only Actions but also Info values.
Thanks for yet another great update! :)
Two wishes for the audio volume settings to be added in the commander:
#1 Lower the volume when the car is put in reverse for better concentration
#2 Make it possible to define a default sound level when the car/system starts. It seems the audio starts out at the same level as when the car was turned off last time and often you don't want to start out on the same adio level. If you heard loud music when you drove back last evening it doesn't necessarily mean you want to start your morning drive at the same level.
Thank you for your suggestions. Maybe we can do some of them in the future update 🙂
#1 is now an option with the latest Tesla update.
I wish for a new product you would release a light bar for all the Model 3 and Y owners that links to the commander so we can have the features of the highland model!!
We are not currently working on a light strip, but it is something many people request, so we might look into it.
I love the feature of pressing and holding the door handle to open the frunk. But if you could pair the action with the interior door button, that would be brilliant! So next the time when I get off the car I could also open my frunk.
In the future we will add more controls. But at the moment, this will be the way :)
@@stephenchew i dont see the need for this. holding down the driver door open interior button is to unlock all passenger doors that's the tesla default. in fact if you're already in the car; the open frunk feature is always on the 25" screen. is there any issue that you personally have with touching that button?
@@minhly4 I wasn't aware of the Tesla default, but I suppose opening driver's door would also unlock the rest of the door? My point of view is convenience - the frunk button on-screen is greyed out when the car is locked, but I don't need to press the unlock button if I open the driver's door, so I could carry out 2 actions with one hand. Similar line of thought where the screen has unlock all doors button but holding down the button unlock all door, isn't it? 🙂
I need to place my order for this ASAP. I just picked up a new MYP 2 months ago and have been toying with the idea of the knob but I think it’s time!!
Congrats on the new car 🙂
Is there a way continue battery preconditioning if you aren’t in the car? Like if the car is parked outside in the cold and unplugged? It would be nice to have the battery preconditioned for max charging speed when traveling.
th-cam.com/users/shortsqXORWQQX8Cs?si=RnApIBg_6LH4zoZO
Very nice new features! 👏
Merry Christmas to all! 🎄
Thank you! Merry Christmas to you as well. :)
Just pulled the trigger for my highland model 3. Can’t wait to get it!
You will love it
Brilliant update thanks. It would be helpful if you can add Joe Mode - Tesla still hasnt fixed the bug where it stops working even though its toggled on in the settings. I'd love a macro where every time I get it, it toggles off and then on again to ensure its working properly. Thanks!
We hear you. Will see what can be done
Can you consider to add the "strobe lights" feature to the knob as well? 😎👌🏼 5:05
We sure will. But it’s hard to do everything in one month 🙂
@EnhanceAuto-S3XY_Gadgets fully understandable 😊 your doing great work, keep it up😉
Omg the rear vent control is amazing! Thank you thank you!
You are very welcome! :)
Great! Have you fixed the flickering Fog Lights?
We constantly improve all of our features, but it all depends on your car.
@EnhanceAuto-S3XY_Gadgets can you specify that? The Cars are all very similar. What makes the difference?
Picked up a Commander and Knob recently and am loving it so far but was surprised not to see rear defrost and the AUTO steering wheel heat option. Would love if those could be added!
Welcome to the club! The rear defronst is giving us headaches, so we have removed it. About the Auto steering wheel heat otption- you want it to work as follow - Off, 1 , 2 , Auto?
@@EnhanceAuto-S3XY_Gadgets
Yes,that would be good
@@EnhanceAuto-S3XY_Gadgets Steering wheel knob functions: Off, Auto, 1, 2 would be nice to have
Would you rather have iit on the know than on the screen?
I would buy one knob + Commander v2 if you implemented a mobile Dashboard that shows the road marks and the vehicles around, as well as the directions, thats more helpful when driving than stats
Any chance on the progress with the data cables for the older models with the rear connector to use blind spot feature?
Sorry, there is nothing at the moment.
Please add a custom action to call any website/api. I have f.e. a gate I can open when I call website just with some parameters, it would be great to have this option to automate things like this.
We are not currently working on it, but we might look into it in the future.
are there any plans for a s3xy knob for the 2018-2021 model 3? thanks
Yes, but for a DIY project :)
@@EnhanceAuto-S3XY_Gadgetsthanks definitely will be waiting for that
Splitting the turn signals via the ambient light is another great safety feature!
Glad you agree 🙂
Installed the new update last night and tested it out today. Love the new ambient lighting split between left and right. Question: the “split” between the left and right is roughly in front of the of the right side of the screen, or not in the middle of the windshield. Is this just the way the strip is split physically ?
Glad you like the update! The thing with the split is due to Tesla's limitations. It is designed to look centered from the driver's perspective.
Great new improvements! Kudos behind bringing the updates in just 4 weeks! I would still prefer to only have the doors in front blinking instead of half of the car. Or even only having the front strip blinking by halves in case there is a warning.
Got it! We will make it even more customizable then :)
THANK YOU!! AWESOME!! Now I only need my screen to turn on dark mode when my headlights are automatically turned on! Parkings, tunnels... Please! I don't wanna be blinded at tunnels
Great suggestions, but unfortunately, we cannot control your screen :(
Super Update - danke.
Vielleicht kann man die Fernöffnung der Heckklappe deaktivieren wenn ein Fahrradträger auf der Anhängerkupplung montiert ist.
Interesting case! :)
That would be great indeed ! 👌
Great update as usual. But...The LEDs do not split. The entire strip still lights for turn signals and blind spot. All products have been updated to current SW.
Have you checked the release notes? Maybe your Tesla software version is the the one required
@@EnhanceAuto-S3XY_Gadgets Yes, that's it! Thanks...
@@EnhanceAuto-S3XY_Gadgets Yes. That was it. Thanks!
Thx for all these updates.
Would it be possible to have a button action that register the dashcam automatically?
I know you can do it with the klaxon, but it’s noisy.
You can make it through vocal command too, but in emergency click command vocal + say the command isnt really relevant as you are focus on the current emergency.
Got it. Not sure we can reach that part of the MCU, but will see what can be done
Благодаря ви за всичко и всичките ви редовни актуализации. Поздравления за целия ви екип. И весели новогодишни празници на целия екип.
Благодарим много! ❤
If people ad aftermarket lighting on the old 3 . Can they use the light strip controls?
No, unless they get our smart light-strip (coming soon :) )
@@EnhanceAuto-S3XY_GadgetsHopefully sooner than expected. This would be awesome!
First of all, I want to compliment you and say that your product is amazing and I enjoy every moment, the latest update is great, I just have a small problem, when I signal, the color distribution in the lighting strip is not divided exactly in the middle but more like 60-40. Is there a solution to this? 3:00
Thank you!
This is how the led strip inside the Tesla is. We think they have done is so it looks even for the driver
Thanks so much for all of this updates. As a new userI am loving some of the extra features it gives my Model 3 Highland.
Is there a better way to adjust the set autopilot speed such as matching what was seen with maybe an option to skip if a button is pressed?
Welcome to the family. :) There is a Autopilot Max buttons, which will try to match the speed your car has detected after you press it :)
You are the best. Hands down. So many useful additions
Thank you sooo much!!! ❤️
Vous faites un travail fantastique, Tesla gagnerait à vous contacter pour établir un partenariat. Vos produits et la qualité sont de très haut niveau. Bravo à vous !
Thank you so much for your kind words!!!
This is a feature that I have been waiting for. But I noticed that the split is not in the center. It seems to be slightly on the right side of the dashboard. I don't know if it's on purpose. In US, the driver is on left side which make right side status a bit harder to see if driver look straight front, especially in day time. I would say the split should be in the center or on driver's side if possible,not the opposite. Can you think about changing it in the future?
This is a Tesla's limitation, it's not from us. From driver's perspective you are supposed to see it centered.
I'm ordering one for mine tomorrow. What are those rims on the model y?
For those still with ultrasonic sensors: the ability to toggle between sensors and Tesla vision would be really great
Not sure we can do that, but will see
Hi!
Will there be update so in 4wd drift it won’t cut power when steering angle all the way to left or right?
Greeting from Sweden
Hi Sweden. What usecase do you need this for?
@
To drift/slide on snow, also to choose front and rear distribution would be awesome like on performance models.
Is the rear DRL the same Software solution as it used to or did you alter it so it blinks on kess vehicles?
Whats the name of the phone mount you are using behind the steering wheel ?
There is no name of it. It is one of our prototypes
Nice update! But why didnt you bring remaining net battery pack capacity and when new to calculate the degradation or cell voltage for the cell drift?
How many times have you emailed us about this feature ?
@@EnhanceAuto-S3XY_GadgetsNever? 😅 I have scan my tesla
Never, i have the scan my tesla app.. whats wrong with you?
Everything excellent. The only part that needs correction is the strip light that when it blinks it seems that the right half is shorter than the left.
This is how it is in every Tesla.
Merci pour cette mise à jour
Serait il possible de supprimer le son lors de l'activation et la desactivation de l'autopilote ?
Merci pour votre travail 👍
Thank you! We wish we could do that, but for not it is not possible. If Tesla adds it to the API, we will implement it :)
always amazed me. thanks S3XY team
Thank you! ❤
Thank you for all these new features !! Congratulations for your work !! You rock guys
Thank you so much for being a great part of our community
Great work! If it does not already exist, could you add a feature that automatically activates WiFi when you start driving so that the car connects to my mobile hot-spot. Currently WiFi seems get disabled by default and I must always turn it back on manually each time I start driving (or wait long for it to connect before engaging Drive mode.. too long). I am not talking about keeping an established connection in Drive mode, this is ticked and ok. I am saying avoid disabling WiFi in Drive mode if not yet connected to a mobile AP. Thanks!!!!!
We wish we could :(
Please @Tesla open this in the car API 😭
May I know how to enable the build spot reminder via knob?
I don’t have a Tesla yet and haven’t done much research but do you have an option that allows your hazard lights to strobe when activated instead of just blinking on / off? I think that would be a great additional for visibility.
So, when you activate the Hazard Lights, they blink 2x faster?
@@EnhanceAuto-S3XY_Gadgetssorry not sure why my reply didn’t post. Yes that is correct. It would “stobe” twice then pause then repeat over and over again while activated.
There is a relay on the market for some vehicles called “smart tap” that has this feature but is hardware based not software based.
Would love to see the sexy knob work with after market l.e.d's that are connected through the car can bus.
That way we can use the same features that are available for the highland version.
Would love to see an action to toggle the new m3p ride and handling setting between standard and sport, plus an ambient light indication for it
Hopefully , one day we can make it 🙂
I LOVE your products and will be buying for my brand new first Tesla, Model 3 performance. May I as where you got that phone mount clip for the steering wheel column? Thanks !
Glad you enjoy our products! The phone mount on the steering wheel is currently in development :)
It would be nice to use rear defrost from the Knob...
Also steering wheel heater auto mode is missing from knob functions.
Thank you for your work!
Thanks for your great job guys! Just add a commander and buttons to my highland M3 it's brilliant!
Have some questions
-why the auto max is not working on a highland? 😢
-the light strip is not separate in center, have a little part on the right and a big part on the left, it's not in the center even on driver's perspective
-I add flash beam on a button one click and I can't put a action on the double click do you know why?
Thanks and merry Christmas to your team!
Hi there. Thank you for your questions.
1. The AP max for highland was added with the last update. Please check
2. This is how Tesla has done it. It is not from us
3. Can you add any other action to a double press to that button, if it’s not high beam flash ? If the feature you have selected it by Cloud not by Commander, then you cannot add a second feature from another section. So only use features from the same group (by Commander )
Great Job Enhance Team!!!! Such Awesomeness with every update!!
Thank you, Joshua! We are glad that you like it 🙂
Is there a way you can keep the hvac and music playing for the passengers when the driver exits the vehicle? Like a always on feature?
I have two suggestions: one is to provide an easy entry mode upon which the windows of any door opened drops like 1/3 of its height, just as a Mercedes EQE does, as it adds a lot of comfort, specially when the space is tight; the other one is to get functions to select the suspension modes in a Model 3 performance (I would like to have a page in my sexy knob just for driving - suspension, wheel, acceleration mode and traction control). Thanks for listening to the community and making the products even better. And a question: is there a way to program a button to use the horn just to thank someone?
All great suggestions. Not sure we can do them, but we will try once we get to them 🙂
Is it possible to make rear seats heater automatic turn on if some one is sitting there. The sensor should already be there as it recognize if someone is sitting there with buckling in.
I'm owning model Y 2023 model and would love to see it.
The code should be something like.
If some is sitting i rear seat and buckled in and temperature is lower than 20 degrees Celsius put on seat heater.
Is there way to completely disable auto braking or one pedal driving in new softwares to have feel like normal gas cars ?
Yes. We have a feature called set regen to 0%
@ awesome. Any tutorial on it ?
Great feature with devided light strip!!! 😀👏🏻💯
Is it possible to have the light strip stay static with decided color and just start flashing red if a car is in the blind spot area, when using the indicators?
No car in blind spot area = no flashing light strip, when using the indicators. Just the decided static color.
With a car in the blind spot area = right or left part of the light strip flashes red when using the indicators, depending on what side the other car is on..
Yes. Just use the option On Turn
Please add a button function to split/sync HVAC!! Currently the split function is only in the temperature sub-menu. You have to change the temperature on both sides before even being able to click de-sync. Now the person who was fine has a different temperature than original.
We will see what can be done :)
Regarding the features: Pease make the brightness of the LED strip (Highland) adjustable on an event basis. E.g. i'd like hazard lights, blind spot warning and rainbow greeting always at full brightness.
Got it
After completing the update, unfortunately the ambient lighting hasn’t changed to just flash on one side when I indicate or in any other scenario. Is there a setting that I’m missing?
Have you checked the release notes? There are 2 features requiring your Tesla to be on 2024.44
Wow congratulations!!
Just a small detail.. when half part of ambient lights are showing, its not exactly in the middle.. its a bit displayed on the right. Would be awesome to adjust it so its split it in the middle ^^
We have no control over this. This is how it is in Tesla. But we think they have done it so that it looks even for the driver when he is in his seat
@ ooh interesting! I think it would be nice to let us choose whether if we prefer it split or full! Just another toggle more :P
Anyway you guys are awesome
Could you make the DING-sound dissapear when the AP and cruise controle is activated?
Sorry, but this is not possible yet :(
@@EnhanceAuto-S3XY_Gadgets is this something you are working on?
@@janvermeiren5309 No. Tesla has not given this options yet
Love the product!
I would love to be able to vent all ny windows with a click of a button while the vehicle is in drive
We hear you. Will see what can be done :)
Thanks for the Christmas update!
For the next one could you add a knob action to turn on only the rear window defog?
When only the rear window is fogged up I don’t need the ventilators to go into take-off mode 😅.
We wish we could add it. We have tried, but it does not work as we need it to. We will keep trying.
Hello since installing the latest version 4.12 the light strip no longer works for either the autopilot or the blind spot warning. on the other hand it is ok for the indicators (with the left right distribution). Is the same for you?
Thanks guys! 🎉 Would love the ability to restore power to the usb ports and the 12v/16v outlets that Tesla recently nerfed. I'd like to be able to power my fridge without using camp mode (which prevents auto door locking and leaves climate control on).
Thank you! Unfortunately, we are not able to do that. :(
Garage door opener for smart garage motors (those with wifi access), without having the aditional hardware in the Tesla installed.
It will be so delicious if you make this function : I would love to see a MAX speed setting for Cruise Control, similar to the FSD Autopilot MAX speed. Are you working on this ?
Will see what can be done :)
Having left my phone in the car several times upon exiting, it may be an idea to have a reminder (say 3 beeps) when the drivers seat is empty, the door closed, and the phone still within distance, after a short time period.
As most don't have the new interior lighting, it would be nice to be able to obtain one that can be fitted and compatible with the Knob. Would sell well I'm sure.
Interesting suggestion. Thank you for it. :)
Wäre es möglich, das die Oberfläche und die Funktionen der App auf den Browser gespiegelt wird?
Which features exactly are you talking about ?
I think about the "Dashboard". I mean the shortcuts and the speedometer
This is probably an edge case, but as a volunteer fireman it would be cool if you could strobe the headlights alternating left and right as well as the brake and reverse lights. I can dream right lol
Unfortunately, we cannot do this at the moment
Could you do something about the crappy rain Sensor function in the older model 3ˋs ? Like adding more Intervalls or something like that.
Awesome update once again! Wondering if it would be possible to have the lightbar in a cascading effect when using the turn signals. Right now it's pulsating which is also great but dynamic/cascading to the side you're turning to would also be nice :)
Hi, does the commander include these all the feature? If I don't have the knob, that means I need to control my vehicle via APP?
Correct 🙂
will the S3XY Stalks being able to do normal blinking but also the 3*Signal, as the previous functionality on the pre highland models?
Disable auto trunk open, when towbar is used, when I have bicycle rack on, I need to be carefull not to near me with my phone, because if the trunk opens it will be really ugly
We hear you. Will see what can be done.
I would like in the next update a way for non hyland user a way for easier blind spot notification. Can a sound be added so that we do not need to check the center console to see if there is trafic in the blind spot? Thanks
We can’t play sounds in your car, but you can use the S3XY app. There is such option in there for almost a full year.
How to activate the strobe lights aka BMW mode? I can’t see it when adding new action to my knob…
It will be a available on the Knob soon 🙂
I have one suggestion: would it be possible to enable the commander to control more than 8 buttons? I have 10 buttons, but for some reason, I wasn't able to control the remaining 2 that can't be paired directly with the commander via cloud.
Sorry, the hardware can only control up to 8 buttons 😔
@@EnhanceAuto-S3XY_GadgetsHi! I have 8 buttons currently. Does this mean some will need to be removed when I get the stalk(s) ?
Eine tolle Automatisierung wäre, wenn die Bremsscheiben regelmäßig bei der Fahrt durch leichtes anlegen getrocknet würden. Des weiteren sollte auf den ersten 1-2km Fahrstrecke der Rekuperation abgeschwächt sein, um ein nutzen der Bremsen sicherzustellen. Viele Teslas haben bei einer Inspektion Mängel an den Bremsen, die auf eine zu geringe Nutzung zurückzuführen sind und sehr hohe Kosten verursachen können. DAS wäre eine Funktion, die viel viel € spart.
A great automation feature would be if the brake discs were regularly dried during driving by lightly applying them. Additionally, the regenerative braking should be reduced during the first 1-2 km of driving to ensure the brakes are used. Many Teslas show brake issues during inspections due to insufficient usage, which can lead to very high costs. THAT would be a function that saves a lot of money.
Interesting suggestion. We have a desire to disable the regen completely. You can use that for now, but we can think of another solution in the future
Can we add the high beam strobe to the knob🙏
Amazing work. Well done!! Love the feature of separating the led strip (i thought this was not possible due to testla software). Now go and get some rest, you deserve it!!
Thank you! ❤
Did I understand correctly, that you can switch off the front motor in the awd models?
Yes, it is one of the actions that you can activate from the Knob or the Buttons
Autopilot pay attention reset is not working on highland. Can you disconnect FSD before penality?