Never seen a break-down knife before. It's a neat concept, but wildly inconvenient. Never mind the fact I would somehow manage to lose the screw that holds it all together.
If there isn't a sheath, you need to carry it with the bottle opener out. So when you do need a knife, you need to pull out the allen key & reverse it? It is inconvenient & it makes no sense.
@@Richard.Dawson I'll put it more plainly. It's good for smuggling. For those who need to pass it off as something other than a knife one time under vigorous inspection. Then it's turned into a knife for good once you reach your destination.
You did a mighty fine job on that knife sir. I did notice though that it doesn't fold. It's a great looking knife just the same and I like that you also cut in the bottle opener. Guarantee it's a one of a kind knife
..каждый Ваш нож, это произведение исскуства ...я думаю Ваши "ножи", будут только в коллекциях лучших, и только в последнюю очередь для остальных и "коммерческих дешевых копиях на али"
@@Russellsperry Me too but still, not everyone can open one up like that. Especially today. Besides, Im sure he made it for the fun of it. Not because he thought it was the most efficient and practical of ideas. Just looks cool. Lots of things are just because of that very reason.
I suggest investing in a band saw, I am well aware at your surgical abilities with an abrasive cutting wheel but I’d wager you’d save more money in the long run by using a band saw for the initial and larger cuts.
Koss, you've become quite the surgeon with the angle grinder and belt grinder!! So very impressive to watch your growth over the years. Thank You for all these wonderful designs and builds! As much as I love the simplicity and elegance of this one, perhaps you could add a feature to store a hex key or just use a thumb screw of some kind. Very trick would be a flat head screw with a fold over butterfly key head that would keep the design flat bodied. Just my thoughts, Always appreciate your fine craftsmanship. Hat Tip, ~PJ
I don't know if it's already been mentioned in the comments but I really think you should intergrat this blade/ bottle opener design with your cross/ fold handle and locking mechanism. It would save you unscrewing the blade to swap it. Just changed it so the bottle opener is used in a different direction so the pressure on the locking mechanism would work 🔥
Что тебя там поразило? Коравая фиксация? Сведение стамески? Медная сопливая рукоятка? Угловатая форма? Будешь такое писать, буду жаловаться Архангельским.
Wow, I love watching your video. You did a great job on this one. This is a really interesting design. Unfortunately I can't ever get to your shop in time to even see what the prices of your stuff is before it's already sold out 😅
The knife looks pretty, but here are some suggestions for future projects! When making a multitool like this, the appeal of making it similar to a Swiss Army knife is strong. But having only one pin holding the blade in place puts a lot of tension on the handle. I’d recommend making a static blade with a longer tang, and putting more pins through the tang. You can still have the bottle opener on the other end, maybe even having a cover that can be taken off the bottom of the handle. Using wood can be more useful for a handle, especially with a longer tang. You can still fabricate the blade just as easily, as once you put wood slats on the outside of the tang, you can grind it to whatever shape you want the handle to be. I hope to see you continue to improve and make beautiful, functional pieces of art!
Nice knife! A slight redesign and it could simply hinge on the screw and switch from knife to opener quite easily. Anyway, nice work. It's much better than all the knives I've ever made (0) LOL
Que hermoso, excelente video, ojala pudiera tener la oportunidad de tener el dinero y de poder adquirir una de sus obras tan hermosas que usted hace Sr. Koss me encantan mucho, un saludo desde Venezuela.
This is a really cool knife, but in order for one to use it as either a knife to cut rope or open a really hard to open packages, or to use the bottle opener you have to unscrew the screw to switch to use either end.
Could potentially use a thumb screw or design it a slightly different way with a slot on the spine with a drop in pin trough the handle possibly with a magnet so you don't lose it , just an idea , but an interesting concept to be fair 👍
Excellent knife man! I don’t know if you have mentioned it in another video but can you please share where you buy the belts for the grinder? Thanks 🙏🏻
Проект интересный. НО съёмный винт и необходимость носить с собой отдельной ключ!!! Это очень плохо. Мне надо заранее решить, чем я сегодня буду пользоваться, ножом или открывашкой. Лучше бы был вариант без винта с резьбой, а просто плотно посаженная втулка (ось, штифт, трубка) которая крепилась бы шнурком к темлячному отверстию. Второе что не понял... зачем делать глухую рукоять, ее же не промыть в принципе, там начнет собираться грязь и ее от туда никак не убрать. К тому же клин, может начать ржаветь.
Change the screw to be something you can take out without a tool. A small recessed button with a shallow leaf spring so you can push it in and slide the blade out. It seems completely impractical otherwise. Sitting around drinking beers with your friends and you get a good buzz going and someone asks for a knife and you start drunkenly fiddling with the bottle opener like, hang on i gotta find my hex wrenches.
Aww... oh well. I was hoping it could fold out and back in. Taking out a screw driver to reassemble it each and every time you want to "switch modes" seems like quite the turnoff. And if I need to carry a screw driver at all times in case I need to reassemble it, I might as well just keep it in knife form and carry a bottle opener separately.
See in the uk if it was a folding blade it would be completely legal to carry, but if it was concealed as a bottle opener it would be illegal even to own! Pretty ironic.
are you planning on selling this one?
yes. it will be available at my etsy shop tomorrow
@@Koss-channel cost?
@@Red-ding-Ton have some patience!
@@boarbot7829 he has the right to ask
@@smashyrashy and I have the right to say “have some patience!”. Your point is irrelevant.
Never seen a break-down knife before. It's a neat concept, but wildly inconvenient. Never mind the fact I would somehow manage to lose the screw that holds it all together.
If there isn't a sheath, you need to carry it with the bottle opener out. So when you do need a knife, you need to pull out the allen key & reverse it? It is inconvenient & it makes no sense.
I believe the intent is to fully mask it as a bottle opener until you are ready to semi-permanently make it a knife.
@@aarone.7551 when I need a knife, I usually need it immediately, not after I take it out & assemble it. It looks cool but it's impractical to me.
@@Richard.Dawson I'll put it more plainly. It's good for smuggling. For those who need to pass it off as something other than a knife one time under vigorous inspection. Then it's turned into a knife for good once you reach your destination.
@@aarone.7551 Lol. Any place that won't let you bring in a knife, isn't going to allow you to bring in that bottle opener.
Your precision with an angle grinder has consistently been something to behold👌
To quote Denzel's character in Training Day when he had the shotgun: "I'm surgical with this bitch"! Lol🤣!
@@CJ_7519 . And, "You know how ya get to Carnegie Hall?? Practice!"
Col. Al Doe Raine
Inglorious Bastards
Don’t know how I’d feel about keeping an Alan wrench at all times but beautiful blade
You did a mighty fine job on that knife sir. I did notice though that it doesn't fold. It's a great looking knife just the same and I like that you also cut in the bottle opener. Guarantee it's a one of a kind knife
Хорошая работа, но думаю, не совсем удобно каждый раз менять положение и носить всегда с собой шестигранник.
Я, признаться, думал будет защёлка под кнопку или ещё что. Но такой вариант...
Наверное это нож модели Джекил и Хайд. Нужно с утра решить, пьёш ты пиво сегодня либо режешь.
@@MarshallSCA типа.подождите ребята.щя я его переверну.
..каждый Ваш нож, это произведение исскуства
...я думаю Ваши "ножи", будут только в коллекциях лучших, и только в последнюю очередь для остальных и "коммерческих дешевых копиях на али"
Your deserve more like!
no bgm, just pure asmr...
Beautiful IKEA knife.
Yeayyy, number uno!
Каждый по своему сходит с ума.полочник для коллекции не больше!
Very Cool Knife !!!!!!!!!!!!!!!
Как идея - классно. Как применение - спорный вопрос. За изготовление лайк.
I mean, from one knife maker to another: looks amazing
BUT - If you know what you're doing everything is a bottle opener ;D
Из складных ножей, этот самый лучший)))
С ключом в комплекте.
As a wood worker, I would like one of these with a 3/4" chisel instead of a knife. Having a chisel in your pocket is handy as hell around my shop.
Hello Koss, You have done another excellent job with a clean and beautiful workmanship, congratulations.☺👍🙌🙋
Nice work, but it doesn't even fold. Why call it a folding knife?
Who cares. Stop being a pedant.
Glad to see you're still making vids!! Great work as always and hope your staying safe out there!!
Thank you for sharing this good idea sir on how making the knife.
Mantap kawan 👍
Brilliant! Love it
hola el video está muy bueno 🤜🤛👍
Beautiful knife, and I love the craftsmanship. I just can’t see the practicality, because I can pop a bottle cap with almost anything.
But not everyone can.
@@Rufio1975 I grew up in the 70s, and 80s where almost everything had a bottle top.
@@Russellsperry
Me too but still, not everyone can open one up like that. Especially today. Besides, Im sure he made it for the fun of it. Not because he thought it was the most efficient and practical of ideas. Just looks cool. Lots of things are just because of that very reason.
@@Rufio1975 True, and it’s a beautiful knife.
Very cool! I was expecting it to be a folding knife,not sure how I feel about needing an allan wrench to use the of half.
Hello Koss Beautiful knife beautiful job well done my friend
incredibly beautyful knife
Looks great!!
Enjoyed your video and I gave it a Thumbs Up
Beautiful work, dude! Really well done! 😃
Fantastic looking knife!!!
Stay safe there with your family! 🖖😊
Cool project 👍 . It was interesting for me to watch the process 🙂🤝
I suggest investing in a band saw, I am well aware at your surgical abilities with an abrasive cutting wheel but I’d wager you’d save more money in the long run by using a band saw for the initial and larger cuts.
Koss, you've become quite the surgeon with the angle grinder and belt grinder!! So very impressive to watch your growth over the years. Thank You for all these wonderful designs and builds! As much as I love the simplicity and elegance of this one, perhaps you could add a feature to store a hex key or just use a thumb screw of some kind. Very trick would be a flat head screw with a fold over butterfly key head that would keep the design flat bodied. Just my thoughts, Always appreciate your fine craftsmanship. Hat Tip, ~PJ
quite the surgeon with a cutting wheel
I don't know if it's already been mentioned in the comments but I really think you should intergrat this blade/ bottle opener design with your cross/ fold handle and locking mechanism. It would save you unscrewing the blade to swap it. Just changed it so the bottle opener is used in a different direction so the pressure on the locking mechanism would work 🔥
Best make a opner knife 🗡️ you are great
Как всегда шикарно!
Что тебя там поразило? Коравая фиксация? Сведение стамески? Медная сопливая рукоятка? Угловатая форма? Будешь такое писать, буду жаловаться Архангельским.
Nice, man!
you should try to do something with a damascus blade at some point ! Great vid
Wow, I love watching your video. You did a great job on this one. This is a really interesting design. Unfortunately I can't ever get to your shop in time to even see what the prices of your stuff is before it's already sold out 😅
The knife looks pretty, but here are some suggestions for future projects!
When making a multitool like this, the appeal of making it similar to a Swiss Army knife is strong. But having only one pin holding the blade in place puts a lot of tension on the handle. I’d recommend making a static blade with a longer tang, and putting more pins through the tang. You can still have the bottle opener on the other end, maybe even having a cover that can be taken off the bottom of the handle.
Using wood can be more useful for a handle, especially with a longer tang. You can still fabricate the blade just as easily, as once you put wood slats on the outside of the tang, you can grind it to whatever shape you want the handle to be.
I hope to see you continue to improve and make beautiful, functional pieces of art!
I think a place to stow the wrench would be handy.
Nice knife! A slight redesign and it could simply hinge on the screw and switch from knife to opener quite easily. Anyway, nice work.
It's much better than all the knives I've ever made (0) LOL
Nice! Always love how you use copper or brass in your handles, really sets your knives apart from the others! also, good choice on the Lowenbrau ;)
Que hermoso, excelente video, ojala pudiera tener la oportunidad de tener el dinero y de poder adquirir una de sus obras tan hermosas que usted hace Sr. Koss me encantan mucho, un saludo desde Venezuela.
that's a cool concept and aesthetically it looks cool but it also would be a pain to get the blade out
The bottle opener is quite useless. You can open the bottle with the back of the blade. Anyhow, amazing work.
Super
Es una belleza, es elegante y toda una obra maestra
Video bem legal 😊👍
Tesla’s Cybertrucks should ship out with one of these. With a black handle.
a slot for the alan wrench in the knife would have been a cool thought
Cool, but the screw part kinda make it pointless
Это надо вместе с ножом носить шестигранник?
Nice
Красота в простоте
С такой толщиной лезвия, можно было и стопор на пружинке замутить, вместо винта !!
you could make it so the blade slides inside the handle and the bottle opener pops out at the end but looks more clean this way
This is a really cool knife, but in order for one to use it as either a knife to cut rope or open a really hard to open packages, or to use the bottle opener you have to unscrew the screw to switch to use either end.
Не понял, это что же, с собой нужно и ключ носить? Хм-м... может защёлку какую-то надо под кнопку.
Need a little pocket in there for the hex key.
Исполнение на высоте.
Но вот менять функции с шестигранником ? Не очень хорошо.
I'm surprised you didn't make it a friction folder.
Sorry for my English but what's the name of the object he used for fixing the blade while he was sanding?
can you make a knife with wooden handle or like a medieval broadsword
на лентопильном станке гораздо удобнее выпиливать такие детали, чем болгаркой
Заточить винт под ноготь большого пальца левой руки.
А че не складной то?
Could potentially use a thumb screw or design it a slightly different way with a slot on the spine with a drop in pin trough the handle possibly with a magnet so you don't lose it , just an idea , but an interesting concept to be fair 👍
how long does this usualy take ?
Чтобы им пользоваться надо носить шестигранник?
3.09 этот инструмент, не знаю как назвать, зажим. У меня есть точно такой. Прикольно. Это делалось во времена союза, очень старая вещица.
Nice job excellent now give it to me 🤨
Cool wo kann man das kaufen
Нож, шикарный, конструкция странная. Если заменить винт на пин, например, чтоб можно было обойтись без шестигранника, то да, здорово!)
Excellent knife man! I don’t know if you have mentioned it in another video but can you please share where you buy the belts for the grinder? Thanks 🙏🏻
Great piece but it's not a folding knife it's more of a reversible knife? If that's a more accurate term?
It is not a folder, but I like the knife.
красивая бесполезность, нож с винтиком, да ещё на шестиграннике это что-то с чем-то
Проект интересный. НО съёмный винт и необходимость носить с собой отдельной ключ!!! Это очень плохо. Мне надо заранее решить, чем я сегодня буду пользоваться, ножом или открывашкой. Лучше бы был вариант без винта с резьбой, а просто плотно посаженная втулка (ось, штифт, трубка) которая крепилась бы шнурком к темлячному отверстию. Второе что не понял... зачем делать глухую рукоять, ее же не промыть в принципе, там начнет собираться грязь и ее от туда никак не убрать. К тому же клин, может начать ржаветь.
I would've sharpened it a bit differently but I'm not a knife maker so what do I know
Wouldn't strong magnets be the better choice instead of a screw?
I wish i had the tool to make mine i can only borrow a angle grinder and files ,but now im trying to cuta kitchen knife into a bushcraft knife
Awesome design but maybe a gravity or a locking folding design would be more practical
Nice work but maybe use a thumbscrew instead of an allen screw?
Superbe couteau qu’elle acier pour la lame utilisée vous et pouvez-vous me fournir le plan si possible merci
To make it fit right together ….. the Allen wrench should be a part of the build! Just saying.
Бля твои ножи отдельный вид искусства ! Нигде не встретишь подобных !
where do you get the tools from?
Don't loose the allen key..😊
Change the screw to be something you can take out without a tool. A small recessed button with a shallow leaf spring so you can push it in and slide the blade out. It seems completely impractical otherwise. Sitting around drinking beers with your friends and you get a good buzz going and someone asks for a knife and you start drunkenly fiddling with the bottle opener like, hang on i gotta find my hex wrenches.
umm that’s not a folding knife…. it looks cool and all but in the title it said folding knife yet it dosnt fold
Is it possible to send u some templates and are they necessary for u? I have some folders in dxf already.
Aww... oh well. I was hoping it could fold out and back in. Taking out a screw driver to reassemble it each and every time you want to "switch modes" seems like quite the turnoff.
And if I need to carry a screw driver at all times in case I need to reassemble it, I might as well just keep it in knife form and carry a bottle opener separately.
It's only a bottle opener, officer!! 👮🏻
See in the uk if it was a folding blade it would be completely legal to carry, but if it was concealed as a bottle opener it would be illegal even to own! Pretty ironic.
@@boarbot7829
The UKs knife laws are without reason.
@@sudo_nym I know
This is not a founding knife, it is a flip knife. You flip the blade to get to the opener.
Does the knife have a template link
amazing video, but those ovens standing on wooden shelves made me very unconfortable.
well damn, mixed feelings on that one
The edge is opener enough.