HOW TO PUT SPRING BACK ON BABYLISS TRIMMERS
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- FadeMasterLos is passionate about his work and providing his clients with the best customer experience. Los developed his Barbering channel on TH-cam to empower his community and to teach others about becoming entrepreneurs by doing what they love. This channel not only provides an in-depth look at Barbering as a career but also provides instruction that will assist any new barber in mastering their craft.
FadeMasterLos’ professional motto is “If you have made something from nothing you must reach back and help others do the same.”
Subscribe for more videos. Would love to get some feedback of what you would like to see NEXT! Make sure you Like and leave a Positive Comment.
Stay connected
Instagram: @fademasterlos
FaceBook: @fademasterlos
Snapchat: @losdolllaz
Tools Used In this Video
Barber Professional Clippers:
Babyliss Gold Skeleton Trimmer:
amzn.to/2uqrZ5g
BabylissPro Gold Fx Clippers:
amzn.to/31v7wIH
Babyliss Foil Shaver:
amzn.to/2OTO0Do
Andis Masters Corded:
amzn.to/3eL9AFc
Andis Master Cordless Clipper:
amzn.to/2OB1pgu
Andis Cordless Trimmers:
amzn.to/39cksWr
Andis Slimline Pro Trimmers:
amzn.to/3vxWwbV
Andis Cordless Envy Clippers:
amzn.to/388DPzx
Andis GTX Trimmers:
amzn.to/370nw6w
Wahl 5 Star Seniors Cordless:
amzn.to/3eLfTrZ
Wahl 100 Year Limited Edition Cordless Clipper:
amzn.to/38hWHfm
Wahl Magic Clips Cordless Clipper:
amzn.to/381iesN
Wahl Retro T Cut Trimmers:
amzn.to/2Us29Zg
Barber Camera Equipment:
Cannon G7x Mark II:
amzn.to/2H3MszC
Cannon 80D:
amzn.to/37buZzW
The General V2 Barber Back Pack
byapptonly.co
For Instrumentals:
...
deemajormusic....
DISCLAMER: All my opinions our videos is our own. This description contains affiliate links. This means that if you click on one of the links above 👆🏿, we will receive a small commission at no cost to you. This commission helps support and grow the channel and allow us to continue to produce videos. Thank you for the support, we really appreciate you! 👏🏾👏🏾👏🏾
I was disappointed because the video wasn’t focused, but if you actually listen and watch the full video it’s the best way
Thanks for having half the video out of focus, really helps!
😂
Shit didn’t work at all
Stfu bro be thankful someone took the time to help us that don’t know. Smh
Real shit
Ong I still can put shi together
Thank you for this! I'm never taking that blade apart ever again.
So glad I aint the only one having issues with the spring, appreciate you 🙏
Easy way. Tightened without the black plastic thing just alittle then put it together by raising the spring legs in it’s appropriate positions and tighten finally. Works great.
After two hours thank you
after erasing my finger tips, thank you !!
What is “the black plastic thing”
goated
Bro on my momma this worked 😂😂😂😂 THANK YOU SO MUCH!!!!
Did you watch the footage you captured? It's completely out of focus.
Didn’t see anything 😭 might wanna make another video focused
The quality was trash for me to see exactly what u did
I promise u wasn’t lying about that rag…I was doing it without it then I heard u say it’s the step most ppl like to avoid but mane as soon as I used it it was so much easier!
Honestly they made the spring holder bs on purpose. It's designed to fail so you have to buy replacement parts. It's a god awful design.
I think my spring is broken😕
I put it on but one of the spring legs keep coming off the area it needs to stay in, so it goes all crazy when I turn it on
Man the exact same thing happens to mine, did you find out?
Still couldn't get spring back in. Ended up using 2 zip ties in the other two screw holes then I screw the middle screw in. Much easier this way.
Man just saved my life with this video
Thank you so much I'm a full-time student and Barber college, took my clippers apart today to sharpen the blades and completely failed putting them back together thank you for your video
I have a Wahl Lithium Ion 2.0 that I was cleaning and I took it apart too far. That spring popped out and I can't figure out how to get it back in. Any suggestions?
To Purchase new spring with blade click here:
amzn.to/2ZvUWfc
Lcc
I got a new way if you wanted to post a video on it you can take the credit for it
You can’t really see anything you see most of your hands but the rest looks foggy didn’t really help me but thank you for sharing explain things very well😊
Really helps that I can’t see cause of the blur great job 👏🏼
Much love brothers and sisters 🙏❤️
My trimmers aren’t cutting like do I just need to buy a new blade? Cause the motor is fine and I just bought it like 3 months ago
Mine not cutting neither; after putting back together
Does loudness on my trimmers depend on the spring only?
I do it looks fine but it moves left and right and it wasn’t like that when I first unscrewed it. I have no idea what I did wrong
Thanks for the video where you can’t see any thing your doing 👍🏼
God loves every single one no matter what🙏❤️
@fademasterlos where can i get a replacement screw that holds the spring down
Once I opened and closed my gold babyliss trimmer, but it was never the same as before , it does not cut the hair anymore and just gets hairs and hurt
The spring keep on popping out
Same
Yeah I’m having no luck.
same
Yes 🙌 can’t our this thing back in ! Thanks
Atleast show properly how to attach the spring, everything is blurry except the title
Fellas an easier way to do this is to put the spring and the blade holder in place first. Then bend the prongs back on the spring and slide the blade in. The spring is strong enough to snap right back in place. It’s way easier and you know it’s right bc that spring instantly pops into place.
??
Facts
THANK YOU DAMN ALL THESE VIDEOS I WATCHED …. all i had to do is read your comment
this was so much easier !!!
I did this way, and it's working bro, thanks, a lot easier. 👍🏽
Love blurry tutorials, thanks!
Could you dip that whole part, including the spring, into barbercide?
I was struggling to do this following the video, the spring would just keep popping out. I took everything off, then screwed in the bottom holder where the spring goes into, but halfway tight. Then turn it around so it actually faces the opposite way and not towards the blade. Slide the spring underneath and it should sit there, then you push this piece and the spring all the way round to face the right way up. Once that’s done, tighten the screw all the way and thats the hard bit done. Then just lift the 2 spring edges with a flathead screwdriver and slot the blade in underneath 2:04
Where do you order a replacement spring for the Babyliss Pro clippers?
If you don’t have the spring. Usually better to buy a new set of blades.
would of been so helpful if I could see whatever the fuck you were trying to show in the most critical part of the reassembly.
Man I just did it but every time I turn it on, the red light goes on for a sec then nothing. And the batteries are full.
This video saved me money
My dude I appreciate the video, it came in handy. I have a boost and it’s the same system.
Will this work on a lo pro babyliss trimer
Yes it will just screw it in the push the prongs in and you'll be good
I love how you litterly can see nothing
Would u know how to do the babyliss pro trimmers?
Just saved me some money!!! Thanks
I lost that small part is there any way tj geg jt back tigethrrv
Thank you 🙏🔥
Thx you I love u bro
My spring keeps popping out every time I turn them on 🤦🏽♂️
Happend to me had to get a replacement unfortunately
This was clutch af thank bruh.
Omg ty so much bro this helped
Man thank you I almost brought a new blade 💪🏾🥶
THANK YOU!!!!
Thank you for your efforts but this is one of the most painful videos I’ve ever watched. Can’t see a thing.
In other words don't take that shit apart not worth time and effort.
Facts 💯
Access? It’s excess
Where to get the spring for the clippers?
They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades
Your video is unclear no help
you got the camera all blurry on the main part
I was happy to find this video until I couldn’t see shit! Huh
Thank you king I was losing my damn mind
Can you do another one?
u know where i can buy the spring ??? please
They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades
Hell yea los I got it
God bless everyone 🙏❤️
i had to use two people....i hold the plastic holder piece down flat with two thumbs while the second person screws
My spring broke. Where can i buy one?
@49 Keyz Beats Amazon don't carry any.
Gracias
You didn’t show where to put it back !
Having the prob on my supermotor uk .
It doesn’t have a spring holder
Uk trimmer are usually similar. Slightly different with power outlet.
@@FadeMasterLos thanks for reply . I figured out in the end . There’s no screw that holds in spring it’s a case of just fitting spring into the holes and then snapping back on the unit while holding blades down firmly and screwing down .
Video didn’t help as the rag did nothing lol. I managed to get them in by putting the piece that goes on the spring backwards loose enough to slide the spring under it. I turned those around to how they are suppose to face and lifted the springs with some scissors so I could put in the black blade. You do have to insert the spring is shown above in order for them to work properly again!
i put it back and i jus bought my trimmers then it sounded bad
Ts don’t work for me
Lol got these babyliss fx skeletons a week ago and these motherfucking springs dont pop in🤦🏽♂️
The very thing you are showing is unfocused. Common bro
Bro this is a major F YOUUUUUUUUUU TO BABY liss bro ICANT EVEN USE THE TRIMMER AFTER TAKING IT APART TO SHARPEN IT THEY REALLY THINK THEY A FOREIGN CAR I FCKING HEATED YALL LUCKY IM NOT ASS OUT NOW I GOT 2.0s cuz THATS RIDICULOUS
Thanks, this shit was a pain
babyliss pros are absolute garbage, i bought 2 of them and the bullshit spring kept slipping out of position on both, they over complicated something that doesnt need to be that difficult to fix, the moment that spring comes out thats practically it for those clippers, unless you make your own makeshift spring to hold it in place. theres cheaper clippers on amazon that look like babyliss that dont even have that issue
Can’t tell with the blurry vision
Quality of that video is not good very blurry can’t really see
i will describe how to do it since this guy doesnt watch what he record and doesnt show anything , the easier way for me was to put the blade it self for half so it can easier be.
so what you need to do is put the string inside where it suppost to be then the bart with screw you put on top of the string , so the string is under the thing you need to have some force then you screw the bolt in and it will work fine
Easyy????
Dam bruh i was bout to throw my shit 😂 ashame i had to watch a video shittt!!! Thanks
Impossible
can’t even see the thing bro
Should be titled how to zoom your camera on your hands while I do something nobody can see
Yo I still can’t get it bro
Which part you getting stuck on ?
Same I’m hella stuck
My metal part don’t lay flat when I put it down
@@jasonmoreno1895 I finally got it. You gotta add pressure bro
@@jasonmoreno1895 there not suppose to lay flat. The lay as if there a triangle facing up .
Video is to blurry
How can you use the clipper if the spring got lost
You must have the spring to use them.
Y is ur vid out of Focus knowing good and damn well you’re dealing with small pieces video not helpful‼️👎
Great the hardes part wasn’t in focus
3/4 out of focus impossible to see
Jesus Christ thank u!!!
Appreciate it cuz! 💪🏾
You guys need to know how to make a video because half the things you were doing was impossible to see and you took it away too quick please get somebody else to do your videos
Excess bruh excess
😂😂😂
No grabas nada
Kinda sucked couldn’t see crap but thanks for trying just not clear
Access hair lol
Whole video out of focus….why even post this?
Comon man remake the video focus sucks
Lol I guess
I can’t with this fucking shit
si ni se veee