OLD SEARS 90 + GAS FURNACE NOT WORKING LOCKED OUT
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2024
- OLD SEARS 90 + GAS FURNACE NOT WORKING LOCKED OUT
merch = teespring.com/...
/ stevenlavimoniere
lavimoniere productions llc
subscribe to my channel
/ @stevenlavimoniere
lavimoniereplum...
Already posted, but its an ICP manufactured 2000. Replacement board is about $125-150. Looks like the inducer was replaced already. A condensate leak caused the rust/corrosion
its an apartment the landlord will be paying for it
In the late seventies, i installed a precharged sears Kenmore central air conditioning system in my then father in laws house. I did not know squat about HVAC at the time. The sustem came with snap loc type fittings and a pre charged line set. That system was still running fine and cooling the house 40 years later when he sold the house. Like everything else, we have been going backwards since the 70's. Most Kenmore stuff was made by Whirlpool as far as I know, and most lasted a very long time.
I have an old ICP from sears from 1998, still going strong. I just replaced the inducer motor and squirrel wheel. It's crazy how big sears used to be with them doing AC/Furnaces etc
Sears made nothing..slapped name on others stuff.. plus company outsourced that end..used outside contractors sales people ... not a single employee...
You could have told her that the flux capacitor isn’t fluxing and she’d be like…yeah I can see that.
She went thru the coldest weather with no furnace but wants to pay Saturday overtime in May to fix it 🤔, can’t figure that out.
That was my thought.
People are just wired different. I’ll see yah during the week lol
@@johnphillipsplumbing7148 landlord
Steve, I saw a place for that old junker Kenmore in that grave yard you drove by. Next video replacing unit with a new one. And make it a COD call so she pays you. Love watching all the service calls you do!
Probably high resistance contact on relay. Voltage probably sagging to almost nothing under load. Oh well, hope you get the job.
totally agree, a board for some of these 90 plus and wall hangers are the price of a complete 80 plus unit. Keep it simple
Good call and great job Steve. You know your stuff .
check for resistance in the motor windings....at 105 v it should do something... Also go right from house current to the blower and see if that runs it.
That's probably a "ghost" voltage. Load it down to any appreciable degree or use a meter with a Low-Z range, and it'll probably vanish.
What!?!?! Steve didn't have the board on the truck!?!? 😉 I think it's an old ICP unit, the board's about 150 bucks. But who knows what else might be wrong.
Make some rigs 110v,24v and test?
The smart valve could be an issue?
Test fan with a rig.
Test inducer fan with rig .
And Test gas valve (if possible) with a rig.
Thanks again for the videos.
🥃🥃🍺🍺🍺🎳⛳
Stay safe.
Retired (werk'n) keyboard super tech. Wear your safety glasses!
Black and white wires on motor doesn't matter in the real life. You cross this doesn't matter. Have good day. I believe you know this .
Any company or person in the rental business should be required to get a bond of some type that would insure the tenant that any repairs will be completed. Some people get into the rental business with not one penny for repairs and have spent the deposits within a week of getting them. Rent is usually spent.
Absolutly true
Hello from western Massachusetts ! Love your channel Steve! Keep up the good work
Amazing work steve 😊 sounds like it is time for a replacement !!!!
Mines starting to go 😢
"You can't fix em all mama" Steve keepin it REAL!
have a older sears automatic basic forced air see a transformer but no relay pilot is on new thermostat 2 wire but will not start cant find any information on this awesome working relic from a day of simplicity.
Can't fix em all Molly ... Good vid Steve ...
Great video brother, she knows what is going on with it now.
I bought a Kenmore dishwasher the week before sears Canada went tits up ,piece of junk ,was probably assembled the same day they got their layoff notice
I don’t know Steve, I’d rather pay $500 to fix it compared to $10k for a new one… what does miss Molly think
Replace that unit! It is what it is!👍👍👍👍👍
That poor lady roughing it through the winter. I hope she puts in a new heater soon, she has just the man to do it.
Was it Sears's Good? or Better? or Best?
That motor is not polarity sensitive. It will run either way, black to black or white to black. Doesn’t matter. It’s still just a coil.
Lol dude I troubleshoot a completely different way. But that's the cool thing about being a service tech.
Nice lady, but baking a lot or otherwise using a gas stove to heat the house has caused fires. Gotta be careful with that. It`s amazing how much the pilot lights can heat-up the kitchen in summer.
When I get cold ,I put another piece of wood in the wood stove !!
Same here, not much to go wrong with them.
Hello Steve!
Wait a minute, Steve. 102 V to the inducer fan? Why?
Steve is the man
I trust Steve’s judgement on this one. It was an odd ball unit and sears is gone. Who know what else is wrong with it. The 103 volts was the open circuit voltage I bet it went to 0 with the motor hooked up. White and black probably didn’t matter it’s an ac motor.
Time for a new unit!
Same brand name furance I had when I bought my house. Wouldn't get over 60 in the winter. Had a let that 28 year old beast go.
I've watched a lot of your videos. I do not think you've tried hard enough to fix this furnace.
you can run the motor on -10% of 120v so 105v would run the motor. that motor was probably shot so the board would jot have worked so good call on the new unit Steve
Hello from the great state of Michigan
Looks like a Goodman
Negative. ICP.
Nice work
hey steve i have a problem i have a byant gas furnace this moring i turn it on and smelling like smoke when i cheak one the burner is out wloud should i do
Call a technician
Hi Steve and miss Molly
Keeping it real
Looks like from 1993. Definitely time
Board and capacitor would have had it up and running for a few hundred. 👨🔧🤷♂️🤔
Give Steve credit for looking at it before he told her it was toast,
Why does it require different plastic vent pipe ?
High temps break down PVC pipe, the same temps that can happen when a unit runs too hot
@@dustinweber6803 So what kind of plastic pipe would be used if he replaced with a new 90% eff unit ? Still pvc or CPVC or ?Thanks
Local regulations. I had a 95% efficient gas furnace installed last year here in California. They still allow pcv vent pipe. Our last furnace was a “Day/Night” from the mid ‘50’s. It still worked but it was quite crusty. The new one works flawlessly so far.
You could have easily installed a universal board saved the lady money. 500 vs 5 grand for a new one..cmon Steve!
I agree
Ya what if the secondary heat exchanger gets plugged soon after, the unit is well past its life. Sometimes replacement is the reasonable decision.
That’s looks like a Carrier furnace so you should be able to buy parts.
Happy Mother's Day
I think a capacitor or two is bad on that board and who knows what else.
you can see the board get wet
Green crusties are never good.
This looks like a Armstrong oem furnace
After paying for diesel fuel for your truck you are probably making about $50/hour.
Hey Steve and Miss Molly! Workin’ again y’all. 👍👍. Another damsel in distress mama!
Change the board
She's a crusty one Mr Grinch.
ps natural gas
Oh come on even I know its a Heil.
🚽
I know you don't like the EC motor technology, but it's a great technology, when use correctly
What's EC technology ?
@@wskripka1 A brushless DC electric motor, also known as an electronically commutated motor or synchronous DC motor, is a synchronous motor using a direct current electric power supply. Wikipedia