@@Kara-kx1lb epoxy takes about 2-3 hours but we wait 24 hours to put the top coat! And top coat dries in about 2-4 hours but we recommend not putting cars or heavy stuff after 3 days
Just use an Epoxy garage floor gray Satin when it's all cleaned up get a 9x10 low cost area rug n u good to go when Rug gets Shabby looking toss n get new one !!Now garage dnt look like a garage if cars come in Kool won't hurt the Rug lol😎👍👍👍
Yes we also apply clear coat on the edges, and if you had a stairs apply epoxy from top to bottom and let the epoxy drip on the edges and just spread it with a paintbrush or small pain roll
It was and epoxy 500 commercial type! We used 3 kits on this garage, and the las coat we used was a polyurethane! That to protect the epoxy coat and the flakes!
Any idea where my man is doing push-ups? Lol. I don’t know why he would need to do this… You can cut in without having to do a push-up… Just curious as to why he is… God bless either way.
@@steemersusa5142 Ive been a painter for a long time, I moved far away and was doing epoxy floor work commercially with a company called sani glaze and I want to bring the process to my hometown. Im Trying to amass a large supply of multi colored flakes and epoxy.
@@steemersusa5142 Epoxying my garage floor is my last project for the summer. ☀️ Trying to gather as much info as possible. This helped a lot Thank you!
What happens when you try to put tape on a dusty area? It won’t stick, that’s why we rather use muriatic acid to make a nice clean and rough surface so epoxy can stick forever. Even when we grind a concrete we clean it like on the video
Is no that we are cheap sir!! The customer wanted it like that! Not everyone likes full flake! It’s actually easier for us to do a full flake than this type of style.
@@lilbabe454 when we do a big project there is usually expansion lines, we do not do enything there we just put the epoxy on top and those stay visible as a design, but you can put concrete in them but might crack in the future.
That would make a big difference, the garage floor is no longer just a garage floor , you can now call it a Showroom Floor :)😊
Lol homie trimming in pushup position
Great job brother, appreciate your work.!! 👍
@@maximus-decimus-meridius thank you brother!! We appreciate it!!
Great craftsmanship really well done. I just added to our flooring playlist
Thank you!!
@@steemersusa5142how long does it take to dry???
@@Kara-kx1lb epoxy takes about 2-3 hours but we wait 24 hours to put the top coat! And top coat dries in about 2-4 hours but we recommend not putting cars or heavy stuff after 3 days
Can you please share which products to use steps 1 to finish ? Thank you
Straight up throwing them specs on the floor like he feeding chickens
That’s the secret to make them flakes look even though lol “throw them like if your feeding chickens” good one 👍🏼
Hell I just wish my garage was that big.
I enjoy using floor grinder, still prepping trying to get under washer and dryer😊
How long does it take to dry???
24-48 hours
@@UCEYUCEJA thank you for letting me know that.
Just use an Epoxy garage floor gray Satin when it's all cleaned up get a 9x10 low cost area rug n u good to go when Rug gets Shabby looking toss n get new one !!Now garage dnt look like a garage if cars come in Kool won't hurt the Rug lol😎👍👍👍
Man has talent
For the edges do you clear coat those as well and what would you do if you had concrete stairs going down to the garage floor?
Yes we also apply clear coat on the edges, and if you had a stairs apply epoxy from top to bottom and let the epoxy drip on the edges and just spread it with a paintbrush or small pain roll
Can you explain the materials used? What was the last coat that gave shinning?
It was and epoxy 500 commercial type!
We used 3 kits on this garage, and the las coat we used was a polyurethane! That to protect the epoxy coat and the flakes!
@@steemersusa5142what does sanding/diamond grind the floor have to do with anything.. does it actually make the primer stick to the cement any better
@@Boyct23 yes sir by sanding the concrete epoxy will adhere to concrete much better and will las a lot longer!
How long after the chips did you add the last clear layer ? I want to do it like you !!
@@lorenzo5220 you add the last layer the next day, after 24 hours.
So what if my floors are older and not perfectly smooth?
That’s when you use a grinder!
Is this electric blue or nightfall?
I might do this or all brick would be first
I wonder how much for this garage epoxy floor?
Looks great really like this 👍🏼
Something like this you are looking around $3k
Is thst With ir without material?
Neighbor just did his 2 car garage. Materials $500 for DIY... including 3 coats of clearcoat.
Any idea where my man is doing push-ups? Lol. I don’t know why he would need to do this… You can cut in without having to do a push-up… Just curious as to why he is… God bless either way.
I guess he’s just a happy worker trying to have fun while working, and probably he enjoys working out to, have a bless day as well.
i was wondering the same thing thing. to each there own i guess 😂😂
Can you do this over old vinyl tiles?
I wouldn’t recommend it. It’s better to get rid of the vinyl and do it on the concrete
Is it rough or smooth texture?
This particular customer wanted a smooth surface, he didn’t want it fully covered with flakes.
#steemersusa5142 .. What materials did you use from the beginning of the process?
I would like to learn about this so do you have any suggestions for me
Garage this size, that is the furthest thing from cheap. You can go to Lowe’s and buy this kit… Very expensive though for this type of square footage.
What’s the machine he’s using in the beginning?
Tile cleaning spinner or you can you use a pressure washer
Wow
What product did u uses as a top coat?
It’s a polyurethane you can get it at any concrete supply store
Niceeeee
Top coat seems too thin should be applied by mil size
What did you use for top coat?
It is a polyurethane
How much the estimate to get something like this done?
It between $4-$5 per square feet
$3,000 - $4,250
Cómo se llama el líquido que aplicas al hultimo al claro y dónde se consigue
Es un polyurethane y en cualquier parte que vendan concrete supplies
@@steemersusa5142 it keeps the epoxy from yellowing
Cost of this project?
Around $1800-$2000
@@steemersusa5142what is the return you get
How much do guys charge
Something like this could run you about $4.5-5.5 per sqf depending on the concretes conditions
What are the products?
It’s an epoxy 500 and the sealer we use it’s a commercial type polyurethane
@@steemersusa5142 Ive been a painter for a long time, I moved far away and was doing epoxy floor work commercially with a company called sani glaze and I want to bring the process to my hometown. Im Trying to amass a large supply of multi colored flakes and epoxy.
What would you do if there’s a drain?
Stuff a rag in it.
What did you spray down? muriatic acid?
Yes we did
What are the materials that you used
It’s a commercial type epoxy. Epoxy 500 PDF
Thanks
My grandfather tried doing this but after it dried it was full of white blotches
Did he clean the concrete really good before epoxy?
@steemersusa5142 Yes, he did. Spent a whole day cleaning the garage floor.
How can i buy topcaot
@@esthersampie9399 we have a vendor here in Houston TX but if your not from here I think Home Depot sells it
@@steemersusa5142 van you help me with a link. Cause i bought the epoxy but it doesn't come with the topcoat. Iam from Suriname. South America.
@@steemersusa5142 do you have a link for me?
Beautiful ❤
@@rolfbernserke4735 thank you!!
@@steemersusa5142
Epoxying my garage floor is my last project for the summer. ☀️ Trying to gather as much info as possible. This helped a lot
Thank you!
@@rolfbernserke4735 once you mix epoxy make sure to roll it quick because it’s dries within 10-15 minutes
Please what is that thing you spread on the floor
It’s a commercial grade epoxy, but you can get some at Sherwin Williams
Need to grind the floor for a better bond
What happens when you try to put tape on a dusty area? It won’t stick, that’s why we rather use muriatic acid to make a nice clean and rough surface so epoxy can stick forever. Even when we grind a concrete we clean it like on the video
I'm searching and will do for a client my x🤯🤯
Hi last one you apply to make shiny what that called
It’s a polyurethane
What are the shoes called?
They are called spikes
How expensive??
For a three car garage, something like this would run you around $3k
Do you have s full tutorial
We don’t but I’ll try to make a video with more details!!
Is it normal to have some flakes sticking up.
Did mine and I’m wondering if a second coat of clear would knock them down
You suppose to scrape them or sand them down before applying the sealer. But if you didn’t do it, it shouldn’t affect it neither way
Can i get the song ID?
Was was he Almost laying down to brush the sides lol
Cuanto se cobra por pie cuadrado
Se cobra de $4-$5 por pie cuadrado
How to epoxy a garage floor and leave footprints all over it.
Where did we leave footprints? We are using spikes 🤦🏻♂️
superclean!
Thank you!
That’s old .
this guy is soo cheap, he should add way more flake
Is no that we are cheap sir!! The customer wanted it like that! Not everyone likes full flake! It’s actually easier for us to do a full flake than this type of style.
Name of chips that your threw ?
How can you do this & still keep the grout/ lines in the floor?
Was Wondering the same thing, wont the concrete crack without the expansion points?
Are you going to put epoxy on top of an existing floor?
@@steemersusa5142 yes it’s just concrete at the moment but it has those expansion lines.
@@lilbabe454 when we do a big project there is usually expansion lines, we do not do enything there we just put the epoxy on top and those stay visible as a design, but you can put concrete in them but might crack in the future.