DIY - How to Build a Block Wall with Akfix 962P Concrete Stone Adhesive Foam (No Mortar Used)

Concrete & Stone Adhesive PU Foam is a professional type, gun grade, ready to use adhesive foam. Specially designed to bond construction elements like aerated blocks and different kind of bricks.
One component, fast curing, easy to use adhesive foam.
Bonding blocks and stones during construction works.
Powerful adhesion to concrete and stone variations.
Suitable to use at interior and exterior applications.
Remarkable resistance to weather conditions.
Not form thermal bridges, thanks to the excellent thermal insulation.
Thanks to the modern chemical formulation does not drip on vertical surfaces. (In accordance with the current regulations).
More economical, practical and easy to use.
Minimum expansion during drying period.
After dried, no further expansion or shrinkage.
No more extra burden or weight to building.
Usable at low temperature like +5 °C.
It does not contain any propellant gases which are harmful to the ozone layer

[@thediyandpianoguy8665]

I have to ask; what about all the uneven blocks on this wall? A lot of them don't sit flush on one another, so how does the adhesive work when there's a 5mm gap between the blocks?
With a motor bond you can get rid of any undulatiins in the footing or the blocks, but I don't see how that works here.

[@davidjames4211]

Spacers.

[@erdogangenc2166]

Gaz beton tutkali yerine bunu kullanabilirmiyiz sadece

[@mwan200]

Where do you bu6 this kit. Because I can’t find it anywhere not even on eBay

[@erdogangenc2166]

Bir tanesi ile kaç tane gaz beton yapidsdirilr

[@johnmcallister8372]

Not a plumb line or a level in sight, hmmmm

[@jamesbradley9233]

Maybe the floor is level, or maybe they're not on a building site

[@erdogangenc2166]

Gaz beton tutkali dan dahami sağlam

[@harkmynes]

no way.