I’ve never worked with automotive stuff… but I do have my own small business and electronics laboratory. I do component level board repair for manufacturing and research clients. But I specialize in test equipment and metrology stuff… For other small labs and research. Also work on a ton of boards from manufacturing equipment like CNC machines and all kinds of other neat fun stuff. I really enjoy some of the videos. Definitely useful information for folks involved in electronics, regardless of whether it’s automotive related This project box is a great example and could be used 100 different ways in just about every part of electronics and diagnostic work. I’d love to see more troubleshooting videos, tools, test equipment, and faultfinding procedures/equipment.., Because that type of stuff is valuable for anyone working in electronics… Automotive related or not. Great channel!
Hello. I specified that this box will be used for bench and for use in the obd plug . I will make another box that will only have outputs without using start and stop buttons.
Hello. I made this 40 minute video and explained everything you need to know. Look carefully, pause if you want to analyze easily. I don't have any schematics to send you, I'm sorry.
Hello. Yes a 5A Fuse is not bad at all, but I will use this box always powered by the power supply. It has protection and that's why I haven't installed one but as you said it's welcome. 👍
Hello. It depends where you buy it. Do the math and see how much the project will cost you. I think it is profitable if it is around 50 euros. You said that the box cost 21 + cable and other accessories you get about 50 euros. a finished one costs 120 euros + postage. you make the decision
I’ve never worked with automotive stuff…
but I do have my own small business and electronics laboratory. I do component level board repair for manufacturing and research clients. But I specialize in test equipment and metrology stuff… For other small labs and research. Also work on a ton of boards from manufacturing equipment like CNC machines and all kinds of other neat fun stuff.
I really enjoy some of the videos. Definitely useful information for folks involved in electronics, regardless of whether it’s automotive related
This project box is a great example and could be used 100 different ways in just about every part of electronics and diagnostic work.
I’d love to see more troubleshooting videos, tools, test equipment, and faultfinding procedures/equipment..,
Because that type of stuff is valuable for anyone working in electronics… Automotive related or not.
Great channel!
Thanks for watching. 👍
Thank you very much for making such a nice video to make the break-out box so easy.
Hello,
I'm glad the information is useful to you.
Great project, I have seen a lot of automotive DIY videos but I have never seen anyone make a breakout box before.
Thanks for watching 👍
So nice..la prochaine fois tu peux convertie la boit d'alimentation du PC à une alimentation variable.
Bon continuation 💪
Thanks 👍
Hope you can make a video on how to use it.
Hello.
More than likely it will follow soon. 👍
Hi bro plz help i buy godiag gt100 breakout box but i don't have ecu pinout diagram so plz tell me i buy wich software or pdf for pinout
Hi . Write to your seller. I don't have that breakout Box
Which direction go to ecu bench mode ?
Have you done table testing with this
Hello,
of course I tried.
I will also make some home videos where I will put it to use.
I will post them !
@@YOYODiagnostic how did you use the CAN H and CAN L to connect to the ECM
Exellent
👍
Super
👍
Hermano si pudiese traducir este contenido en español sería genial, muchas gracias.....
what program did you use for the template?
Hello.
Photoscape
Por favor me envie o esquema elétrico da caixa que você está montando
Nicht schlecht 👍🏼
Danke . 👍
Good 👍
👍
Nice
Thanks 👍
Don't combine the grounds. Knowing different readings depending on wired or chasis ground can be very useful.
Hello.
I specified that this box will be used for bench and for use in the obd plug . I will make another box that will only have outputs without using start and stop buttons.
♥️♥️♥️♥️
👍
Check the godiag gt 100 breakout box friend much better quality its around 100 dollars at most good breakout box with several connectors.
You believe I don't know? Do you have it for sale ?😀
thank you can you give me the schematic
Hello.
I made this 40 minute video and explained everything you need to know.
Look carefully, pause if you want to analyze easily.
I don't have any schematics to send you, I'm sorry.
@@YOYODiagnostic thank you 🤝
Great ! Only thing I would add is a fuse on input.
Hello.
Yes a 5A Fuse is not bad at all, but I will use this box always powered by the power supply. It has protection and that's why I haven't installed one but as you said it's welcome. 👍
Nice project but Powerbox is 21$
Hello.
It depends where you buy it. Do the math and see how much the project will cost you. I think it is profitable if it is around 50 euros. You said that the box cost 21 + cable and other accessories you get about 50 euros. a finished one costs 120 euros + postage. you make the decision