I had a stage II done by the HD dealer when I bought my bike, 21 Lowrider S, using the Harley tuner, cam, some slip on pipes and all the necessary work performed by them just to keep my warranty intact. It's been riding strong. Honestly, I've often thought about spending the cash on a 131 upgrade because I like the bike so much but really the thing doesn't need more power.
The lowrider's revenge just like a typical chick you give another chick more attention she's going to cause drama which usually cost you time and or money 😂😂😂
You're gonna love this cam!! I have a similar set up and dyno'd 116hp, 120 torque with powervision. I have the TBR turnout and get a small dip in torque @ 3000 rpms. I don't notice it while riding though so not really a bid deal.
Your gonna love the 475 I just had my 114 Street Bob done 117hp and 126 ft-lbs at the wheel it's going to rip and the idle chop is insane. Looking forward to seeing the videos mate. And a shout out to Jerry the coolest white guy you know. Stay safe brother 🤙
I started collecting the poker chips, figured I would go with something small... Cheers from Ontario Canada, love the channel, keep up the awesome work !!!
I have a lot of Harley T-Shirts but I never fail to get a Harley Poker Chip whenever I'm in a dealership for the first time. I keep the poker chips in a collectors book that I use as a coffee table book.
Damn sorry to hear that. But at least she’ll be getting upgraded parts while getting fix. I’m at 6k on my ‘21 fxlrs and will be taking her to Florida from nyc and back in sept. Ride safe always
Sorry to hear what happened to your bike. A few sugestións. First consider the TTS Master Tuner, ask Dyno Dave about this in particular, second consider Ams oil or Spectra oil, and last but all for your consideration is make sure you are which I am sure your mechanic recommends it ,is the S&S precisión premium lifters with the S&S camplate and oil pump. Bendiciones from California. 🙏
Same situation, same model bike, went the fueling route but either way won’t be disappointed!! Gotta take those dumpy parts out that Harley cheaped out on & a proper stage 2 pretty much fixes all the problems they put in there. I would also look into venting your crank case some how with more oil pressure. Trask has a trans vent which is the cleanest set up I’ve seen. Also a piece of mind fix is a $180 55 mm S&S intake, that goes with the stock throttle body, instead of the restrictive stock plastic one & it frees up about 3-4 more torque & hp throughout the range.
S&S makes solid products but I didn’t like their quikee push rods but their performance lifters are killer. Using he S&S Lifters and Zippers Semi-Solid Push rods I had almost no valve train noise. Unfortunately they have to go in from the top and that was was on a Twin Cam. My FXLRST is in the mail and it’s nice to know potential weak points to watch out for. Thanks for the video
Been collecting Harley T shirts way before I even started riding. Basically since jr high. But I also have a nice collection of hard rock t shirts from all over the world that I would pick up during my time in the navy.
I got my 2021 Low Rider S upgraded to a Stage 2 a month ago. Fuel pump needed to be replaced within two weeks because the PSI was low. It kept stuttering to a start and taking 5 seconds to get there. Pain in the ass.
I had the same issue with the fuel pump after installing stage2!! I also got the screaming eagle lifters fitted just in case… looks like I did the right thing!!?
Your mechanic will let you know, but the S&S oil pumps are designed to work with pinion shaft runout up to 0.005". If it does not meet the specified runout then the oil pump can not be installed.
@@Marvelkid87 ya man mine was just at that threshold... but the 20 pumps are good too! But it would be alot better to have a s&s oil pump! Your gonna love the 475 kit bro! You'll get atleast 120ish hp and tops 130sum tq!
Damn that sucks to hear, but atleast with the upgrades you are going to need new tires from the burn outs. I like to collect Shirts and poker chips from every HD store i go to
Sorry about the LRS! So Jerry had the same issue with his Pan Am even though that’s a totally different engine? Love the T-Shirt collection, I have my own as well from my own travels! Stay well MK!
Shitty deal man. I do the same with t shirts but I have a few restrictions in place. If I'm out of state and have time, I will stop and pick up a shirt from a local dealership. However my rule is that I must have ridden my bike into the parking lot. No flying (unless outside the mainland), and no stopping in while in a car/truck. So far I've got my home state of NH, also have NY, MD, NC, SC, and GA. I have been through all the east coast states on my bike except for Florida. Still need to actually stop at a dealership in most of these states though lol, you'd think being less than an hour from a dealer in VT I'd have remembered to get one on the numerous occasions I've past it lol. It's about the only classic "Harley guy" shit I do, but damn they ask too much for those damn shirts lmao.
Isn't a goodwill repair possible from harley? I mean it's only 14k miles, thats not a good advertisment for the company. I got around 10k km on mine. Hope she stays safe for the next years. However, i am excited to see your Stage 2 and wish you all the best!
I don't get it? You didn't get a stage 2 before? You got the s&s tear drop air cleaner and tbr 2-1 pipe... Then you have to make a proper tune.... It's no wonder your bike broke?
Your bike should already have the updated oil pump from what Harley originally put in the 2018 M8 Softails, you shouldn't need to update it for the cam you intend installing.
7,000 miles and it has an engine failure like that? HD quality at it's best lmao. I love when HD engines break and the owners first idea is to somehow add power to it.
I had a stage II done by the HD dealer when I bought my bike, 21 Lowrider S, using the Harley tuner, cam, some slip on pipes and all the necessary work performed by them just to keep my warranty intact. It's been riding strong. Honestly, I've often thought about spending the cash on a 131 upgrade because I like the bike so much but really the thing doesn't need more power.
There’s cheaper and less costly ways to raise your power out put. That I learned at a high cost
The lowrider's revenge just like a typical chick you give another chick more attention she's going to cause drama which usually cost you time and or money 😂😂😂
Lmaooooo 🤣🤣😂😂😂
You're going to love the 475 cam bro. Its a real head turner.
🔥🤩
I do the same thing!! I get Harley Tee’s from wherever I travel. I’m sure your collection is sick
It's going to be a better bike and it's going to be awesome content. Your channel is great.
You're gonna love this cam!! I have a similar set up and dyno'd 116hp, 120 torque with powervision. I have the TBR turnout and get a small dip in torque @ 3000 rpms. I don't notice it while riding though so not really a bid deal.
Yea I can’t wait man
Your gonna love the 475 I just had my 114 Street Bob done 117hp and 126 ft-lbs at the wheel it's going to rip and the idle chop is insane. Looking forward to seeing the videos mate. And a shout out to Jerry the coolest white guy you know. Stay safe brother 🤙
Hell yea man 🔥👊🏽
I started collecting the poker chips, figured I would go with something small... Cheers from Ontario Canada, love the channel, keep up the awesome work !!!
Thanks for watching 🇨🇦 chips are cool 🔥👊🏽
I have a lot of Harley T-Shirts but I never fail to get a Harley Poker Chip whenever I'm in a dealership for the first time. I keep the poker chips in a collectors book that I use as a coffee table book.
Damn sorry to hear that. But at least she’ll be getting upgraded parts while getting fix. I’m at 6k on my ‘21 fxlrs and will be taking her to Florida from nyc and back in sept. Ride safe always
Nice man enjoy that ride
Good thing you got that bagger backup 👍
I just put the 475c in my wife's lowrider st. Sounds great and runs strong. Might see you at the next bike night if they have it the last Thursday
Nice man I can’t wait to see the results and yea I’ll be there
Sorry to hear what happened to your bike. A few sugestións. First consider the TTS Master Tuner, ask Dyno Dave about this in particular, second consider Ams oil or Spectra oil, and last but all for your consideration is make sure you are which I am sure your mechanic recommends it ,is the S&S precisión premium lifters with the S&S camplate and oil pump. Bendiciones from California. 🙏
Sorry to hear that. 475 cam woohoo rippin and roarin around town/hwy 👍 , power galore my brother. Ride Safe Be Safe........
🔥👊🏽
That's the way to go.... something break, make it better!💪🏍💨
🔥🤩👊🏽
Same situation, same model bike, went the fueling route but either way won’t be disappointed!! Gotta take those dumpy parts out that Harley cheaped out on & a proper stage 2 pretty much fixes all the problems they put in there. I would also look into venting your crank case some how with more oil pressure. Trask has a trans vent which is the cleanest set up I’ve seen. Also a piece of mind fix is a $180 55 mm S&S intake, that goes with the stock throttle body, instead of the restrictive stock plastic one & it frees up about 3-4 more torque & hp throughout the range.
Yea I for sure want to do the throttle body later on not right now though
@@Marvelkid87 intake is separate from throttle body $180 part for 3-4 more ponies
Sorry about the bike. She will be running great soon.
I collect the Poker Chips. I’ve gotten 8 so far. When I get me a bagger, I’ll be able to get even more.
S&S makes solid products but I didn’t like their quikee push rods but their performance lifters are killer. Using he S&S Lifters and Zippers Semi-Solid Push rods I had almost no valve train noise. Unfortunately they have to go in from the top and that was was on a Twin Cam. My FXLRST is in the mail and it’s nice to know potential weak points to watch out for. Thanks for the video
Sorry about your Lowrider S, I have a nice collection of poker chips! Cant wait to see the Lowrider S after your put the Stage 2 on it!
Thanks man! I know a lot of people who collect chips
I have a 2020 m8 softail 107 with stage 2 and I have 40k miles so far. Warranty runs out in a few days.
i love the "my bike is broken, might as well put a stage 2 in" energy 🤣
😂😂😂
I'm looking forward to seeing your results. Oh, I collect Harley t-shirts also.
🔥👊🏽
Been collecting Harley T shirts way before I even started riding. Basically since jr high. But I also have a nice collection of hard rock t shirts from all over the world that I would pick up during my time in the navy.
Might as well get a fresh paint job. That'll be the icing on the cake for a custom build.
Bike looks good all black
🔥👊🏽
Man that sucks sorry to hear your bike down .
Where did u get that shirt @marvel
Sorry about your sled bro. Hopefully all the views, likes and comments helps pay for some of the repairs. Looking forward to what comes next.
Where did you get the gold bolts for the bars and gas tank??
Sanjosecustoms
I got my 2021 Low Rider S upgraded to a Stage 2 a month ago. Fuel pump needed to be replaced within two weeks because the PSI was low. It kept stuttering to a start and taking 5 seconds to get there. Pain in the ass.
I had the same issue with the fuel pump after installing stage2!!
I also got the screaming eagle lifters fitted just in case… looks like I did the right thing!!?
Your mechanic will let you know, but the S&S oil pumps are designed to work with pinion shaft runout up to 0.005". If it does not meet the specified runout then the oil pump can not be installed.
Thanks for the tip
@@Marvelkid87 ya man mine was just at that threshold... but the 20 pumps are good too! But it would be alot better to have a s&s oil pump! Your gonna love the 475 kit bro! You'll get atleast 120ish hp and tops 130sum tq!
Sucks that happened. Looking forward to seeing what comes next
All good man the bike is going to rip now
@@Marvelkid87 I have no doubt bro. can't wait to see how it comes out.
Four years? Even if you bought the first one in August 2019 that's only 3 years old. Which makes this suck even worse. Glad I never bit the m8 bullet.
It’s not a big deal. Easy fix and upgrade. I’ve done mine myself.
Good luck bro 😎
Can anybody send me the link for the kit, I want to see the price and start saving to do it on winter
I knew I heard something on your last video when you pulled into the dealership
I want to change my low rider s 2016 for road glide 2022 .m8 motor get me affraid to lot of problem those motors🤔
Lol, the 110 is notorious for lifter problems.
My uncle's started ticking after he had to ride it home on a hot day. 105 degrees. Only has 2,000 miles.
This isn’t under warranty??
my 21 FXLRS motor blew at 6200 miles. fully grenaded itself. harley replaced it. but wtf.....
Bro I heard that ticking sound your video before this one . I was like that don't sound right. Sounds like a typewriter.
Damn that sucks to hear, but atleast with the upgrades you are going to need new tires from the burn outs. I like to collect Shirts and poker chips from every HD store i go to
Lol yea that’s coming 😅😂🤣
Sorry about the LRS! So Jerry had the same issue with his Pan Am even though that’s a totally different engine?
Love the T-Shirt collection, I have my own as well from my own travels! Stay well MK!
Yea but his was a bit more sever
I just hit 10K on my 2020 LRS this morning and all these comments are scaring the shit outta me!
Shitty deal man.
I do the same with t shirts but I have a few restrictions in place. If I'm out of state and have time, I will stop and pick up a shirt from a local dealership. However my rule is that I must have ridden my bike into the parking lot. No flying (unless outside the mainland), and no stopping in while in a car/truck.
So far I've got my home state of NH, also have NY, MD, NC, SC, and GA. I have been through all the east coast states on my bike except for Florida. Still need to actually stop at a dealership in most of these states though lol, you'd think being less than an hour from a dealer in VT I'd have remembered to get one on the numerous occasions I've past it lol.
It's about the only classic "Harley guy" shit I do, but damn they ask too much for those damn shirts lmao.
Isn't a goodwill repair possible from harley? I mean it's only 14k miles, thats not a good advertisment for the company. I got around 10k km on mine. Hope she stays safe for the next years. However, i am excited to see your Stage 2 and wish you all the best!
I was gonna say, in your last video it didn’t sound right
Thought the same thing lol
I know man 💀
Yupp same here
Should have done this a long time ago. Late to the stage 2 game. Lol
What kind of grips do you have on the Lowrider S?
They’re Arlen ness
At least you have another bike, if this happened to me I would be FUC#ED because I have 1 bike and I couldn't afford to fix it right now. Lol
Refrigerator magnets everywhere I go!!!
I know what really happened ....it's damaged. It has a broken heart. Jealous of that RG. I've seen it happen before. If only garage walls could talk.
😂😂😂😂
That happened to me I brought my new Harley Street Bob home and my Moto Guzzi committed suicide it's still in the shop.
I don't get it?
You didn't get a stage 2 before?
You got the s&s tear drop air cleaner and tbr 2-1 pipe... Then you have to make a proper tune.... It's no wonder your bike broke?
Has nothing to do with that …..
I got all that done to lots power
Interesting that it happened after the fact of installing that SE Cam & push rods. 🤔
Wrong bike man that work was done in my road glide …
@@Marvelkid87 oh shit my bad 😞
youre going love the s&s 475 cam shit a big difference in personality of the bike. i smack my boys stage 4 tc motors all day 😎
I bet lol
Get a 131ci do it!!!
Sounds common sense but make sure you rule out a leaking exhaust head. Bike will make that same sound if an exhaust head is loose
Yea I Already checked for that
Tshirts have over 200 , pins
I need to come over your house one of these days and look at your collection 🤣🤣
The lifters died of boredom lol
Fueling cam kit is far superior
I collect Harley Davidson wigs, because they are the best!
Lmaooo
Your bike should already have the updated oil pump from what Harley originally put in the 2018 M8 Softails, you shouldn't need to update it for the cam you intend installing.
Yea but I wasn’t to change everything out and not have to deal with anything down the line
Sounds like my iron 883 lol
7000 miles WTF?
Love the video love the bikes but 🖕🖕Harley Davidson Clothing support your local shop
Collapsed lifters? You're making a big deal out of nothing
That's a harley that's totally normal.
Not riding the bike enough. That's the problem.
Say it ain’t so dude
Yerrrrr
Yerrrr
7,000 miles and it has an engine failure like that? HD quality at it's best lmao. I love when HD engines break and the owners first idea is to somehow add power to it.
Dam! Sucks. Harley cheap ass parts! Don't use Harley oil either. ⚡️👍
Lol nothing wrong with harley oil
🤦🏻
Very reliable things can only be made in Japan nowdays. 🫤