Do every single bosch sensor come with thread compound on it? I bought upstream and downstream sensors for my honda and only one of them has the thread compound on it
What's the big deal about replacing it Before it fails ? What's wrong with replacing it when I see there is a problem, ie: when it has failed ? Also, I don't understand what you mean : calif regulations require that a fault code is set before replacing an O2 sensor. Please explain those 2 things.
Hello, my honda car has a dense mark on the sensors but I bought a bosch brand oxygen sensor for now it is working but the only thing is that my sensor is broadband and oscillates differently from normal oxygen sensors. I don't know if I trust this brand although I have read that it is very good like the original, since Bosch is also a bit expensive. If anyone has used oxygen sensors of this brand, tell me if they are reliable.
I need a 025803000N sensor for my UAZ HUNTER wonder if i can use the bosch 15733 0258986602 hard to find it in mexico. Thanks or which you recommend from bosch ?
Hello, my honda car has a dense mark on the sensors but I bought a bosch brand oxygen sensor for now it is working but the only thing is that my sensor is broadband and oscillates differently from normal oxygen sensors.
hey, I bought a universal o2 sensor (11027) for my 91 mr2. auto zone website said it was the right one. but the o2 sensor has one wire coming out of it and the mr2 has 2 wires . do I combine the wires and crimp them to the sensor?
Hi Scott. Thanks for reaching out. All of our parts come with anti-seize but if the part has been installed and removed some more needs to be added, most auto parts store carry a small packet at the counters, but we use high temp copper based anti-seize - No Silicone it can cause the sensor to go bad.
Your best course of action is to contact a regional office in your area as we are only able to address these issues within our Bosch North America region. Please visit spr.ly/6055GMxOJ for local assistance to find the Bosch office in yor region.
What does it mean when the video say California state regulations require that a fault code is set before replacing an oxygen sensor?
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
The Bosch sensor I bought needs to be wired, and I have to somehow use a portion of the existing wiring. I was hoping this video would cover that.
Our Customer Service team is handling your case internally. We will prompt them to contact you for an update during normal business hours.
The sensor I am aware of needing to be spliced is the universal sensors to which the link to the installation video is below.
spr.ly/6052181a6
Do every single bosch sensor come with thread compound on it? I bought upstream and downstream sensors for my honda and only one of them has the thread compound on it
YessZziirr
What's the big deal about replacing it Before it fails ?
What's wrong with replacing it when I see there is a problem, ie: when it has failed ?
Also, I don't understand what you mean : calif regulations require that a fault code is set before replacing an O2 sensor.
Please explain those 2 things.
Hi I have vito 114cdi 2.1 should I use non-merc Bosch oxygen sensor will it work properly,
Hello, my honda car has a dense mark on the sensors but I bought a bosch brand oxygen sensor for now it is working but the only thing is that my sensor is broadband and oscillates differently from normal oxygen sensors.
I don't know if I trust this brand although I have read that it is very good like the original, since Bosch is also a bit expensive. If anyone has used oxygen sensors of this brand, tell me if they are reliable.
I need a 025803000N sensor for my UAZ HUNTER wonder if i can use the bosch 15733 0258986602 hard to find it in mexico. Thanks or which you recommend from bosch ?
Does Bosch make equivalent O2 sensor to Denso 234-5178 and 234-4988?
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
Hello. Thanks for reaching out. Unfortunately, Bosch does not make an O2 sensor that is equivalent to these two sensors.
Hello, my honda car has a dense mark on the sensors but I bought a bosch brand oxygen sensor for now it is working but the only thing is that my sensor is broadband and oscillates differently from normal oxygen sensors.
hey, I bought a universal o2 sensor (11027) for my 91 mr2. auto zone website said it was the right one. but the o2 sensor has one wire coming out of it and the mr2 has 2 wires . do I combine the wires and crimp them to the sensor?
When changing exhaust, what type of anti seize should be used to reinstall the used O2 sensor?
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
@@BoschAutoNA thank you. I have a similar question when removing and reinstalling spark plugs.
Hi Scott. Thanks for reaching out. All of our parts come with anti-seize but if the part has been installed and removed some more needs to be added, most auto parts store carry a small packet at the counters, but we use high temp copper based anti-seize - No Silicone it can cause the sensor to go bad.
Take a shot every time this fuckin guy says Bosch. Like dude I already bought the damn sensor so quit trying to sell it to me.
How to order oxygen sensor code 0 258 010 202? I ak from philippines
Your best course of action is to contact a regional office in your area as we are only able to address these issues within our Bosch North America region. Please visit spr.ly/6055GMxOJ for local assistance to find the Bosch office in yor region.
Bosch thinks air goes thru the wires. 😂😅
✌️
Is it possible to clean the lambda 4.9 lsu with ultrasonic cleaner machine? Will it help ?
Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.
Hello. Thanks for reaching out. Bosch does not recommend cleaning of the O2 sensors.