U helped me replace my water pump so thank you for that man but unfortunately it's still overheating any thoughts I'm thinking the radiator but not sure
You may want to bleed It real good after changing Water Pump, Coolant Temperature Sensor, and Thermostat. I seen where not enough is devoted to thoroughly bleeding the entire system causing severe overheating. Also you may want to consider doing a System Flush using water and CLR( CALCIUM,LIME,RUST) found in any plumbing section of Walmart after replacing such Components to clean out Radiator and Heater Core of any such Debri. After a thorough flush Then add the correct Coolant and bleed the System. This really works.
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
Is it safe to remove the 15mm motor mount without putting a jack under the engine to hold in place ,or am I trippin 😆 I need to remove the same mount
U helped me replace my water pump so thank you for that man but unfortunately it's still overheating any thoughts I'm thinking the radiator but not sure
You figure out your overheating problem? I changed thermostat and coolant temperature sensor but still overheats so now onto changing the water pump.
You may want to bleed It real good after changing Water Pump, Coolant Temperature Sensor, and Thermostat.
I seen where not enough is devoted to thoroughly bleeding the entire system causing severe overheating.
Also you may want to consider doing a System Flush using water and CLR( CALCIUM,LIME,RUST) found in any plumbing section of Walmart after replacing such Components to clean out Radiator and Heater Core of any such Debri.
After a thorough flush Then add the correct Coolant and bleed the System. This really works.