ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Cummins isx 2350/2250 high pressure fuel pump update barrel/plunger/tappet

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 เม.ย. 2018
  • Updating pump head barrel and plunger assembly. Also replacing old brass bushing tappets with new hardened steel type.

ความคิดเห็น • 81

  • @madmotorrepair1748
    @madmotorrepair1748 6 ปีที่แล้ว +5

    Good information, I learned something today thanks😀

  • @daveireson6001
    @daveireson6001 5 ปีที่แล้ว +5

    Good video, 1 of the biggest problems the Cummins fuel systems have is contamination. Before you do any work on the system pressure wash and brake clean the are and components your removing.

  • @bily4566
    @bily4566 5 ปีที่แล้ว +1

    Really love watching your videos brother

  • @artemiomendoza3895
    @artemiomendoza3895 ปีที่แล้ว +1

    You are the man, you saved us a lot of time and money, great video thanks a million and keep up the good videos

  • @possmguts
    @possmguts 6 ปีที่แล้ว +2

    Thank you for doing this video

  • @antiq777
    @antiq777 4 ปีที่แล้ว

    Super jab!

  • @theojocaliente
    @theojocaliente 5 ปีที่แล้ว +1

    Thanks for the Video. 👍🏽

  • @DirkDigglerbig1
    @DirkDigglerbig1 3 ปีที่แล้ว +1

    Thank you for the video.

  • @user-lu4gl6xt9q
    @user-lu4gl6xt9q 6 ปีที่แล้ว

    Good video

  • @RA-zk4gg
    @RA-zk4gg 2 ปีที่แล้ว

    Good video👍

  • @kobeljo
    @kobeljo 6 ปีที่แล้ว

    Ok thanks

  • @cesarvargas7736
    @cesarvargas7736 5 ปีที่แล้ว

    Will dirt cause high pressure fuel problems if dirt gets in fuel system ?

  • @motorcity429
    @motorcity429 5 ปีที่แล้ว +3

    The isx is a gentle beast if you wanna have premature failure of everything change the oil every 30 40k . Oil 10-12k coolant every 24months only use part number matching filters. Do not idle the isx under 1000rpm oil pressure to low. This is all in the cummins owner's manual that nobody ever reads .

    • @simonsays6924
      @simonsays6924  5 ปีที่แล้ว +2

      I always change oil 15000miles.

    • @alexr4723
      @alexr4723 5 ปีที่แล้ว

      what's the recommendation on the idle when running a PTO. (wet kit) Thanks in advance

    • @AncientPharaoh
      @AncientPharaoh 3 ปีที่แล้ว

      @@simonsays6924
      I only get Rotella T6 full synthetic. I change around 30K what do you think bud. Thanks.

    • @AncientPharaoh
      @AncientPharaoh 3 ปีที่แล้ว

      Dan R •,
      You’re talking about convention oil change right.

    • @simonsays6924
      @simonsays6924  3 ปีที่แล้ว

      @@AncientPharaoh Yes you can do that with synthetic oil nothing bad will happen. But I would not go past 50k.

  • @cartruck8457
    @cartruck8457 3 ปีที่แล้ว

    Good video, how much ,the up grade?

  • @thomasjolly6127
    @thomasjolly6127 5 ปีที่แล้ว

    i am sorry. i meant the star pipe plug on top of pump covering the plungers. there are four of them.but is leaking from the front one on top.

  • @wb2679
    @wb2679 5 ปีที่แล้ว +1

    For the love of donuts ppl, clean the dirt off with carb cleaner/brake Kleen before ya start and practice clean care. Cummins covers this under a TRP/campaign on affected engines don’t know why people pay for the parts themselves. The head is also checked under the campaign. If you screw this up you could be talking a new fuel pump minimum all the way up to new engine.

  • @eugeniaarango5489
    @eugeniaarango5489 5 ปีที่แล้ว

    Hi, where i came buy this product: gas-glo 32 fluorescent leak detection dye. Thank you

  • @hamza4151
    @hamza4151 5 ปีที่แล้ว

    Part numbers for cm2350 ?
    What parts needs to be replace i got around 350k on my truck yet.

    • @simonsays6924
      @simonsays6924  5 ปีที่แล้ว +1

      Part numbers for 2350 shown in video.

  • @adamg3289
    @adamg3289 6 ปีที่แล้ว

    Where are you located?

  • @thomasjolly6127
    @thomasjolly6127 5 ปีที่แล้ว

    my truck leaks fuel at the star nut on top of fuel pump head. do you know why. does throw code of fuel rail pressure. need help

    • @simonsays6924
      @simonsays6924  5 ปีที่แล้ว

      Its most likely banjo bolts o-rings fuel lines. If you are sure that star bolts leaking then thats head leak and head needs to come off.

  • @steveodens1064
    @steveodens1064 4 ปีที่แล้ว +1

    Cummins says I need to buy the fuel pump head which will have the updated tapped.
    Question is were you able to get just the upgraded tappets separately? I'm being told otherwise.
    Thanks!

    • @simonsays6924
      @simonsays6924  3 ปีที่แล้ว +2

      You dont have to buy head in order to get tappets. They sold separately.

  • @isaiasbalbuena6356
    @isaiasbalbuena6356 4 ปีที่แล้ว

    Hi everyone, good job man, that part is very expensive, my kw has a isx 450 HP , and the fuel pump went bad, and that problem cost me 6,500 dollars. No good.

    • @simonsays6924
      @simonsays6924  4 ปีที่แล้ว

      Yes dealer charges insane money for that.

    • @tonymena3390
      @tonymena3390 3 ปีที่แล้ว

      Did you pump have the ceramic plunges and did it break? Because my broke, so now I'm nervous about engine damage

  • @m.d.40
    @m.d.40 5 ปีที่แล้ว

    I need help, my Volvo won't start but it does crank, I sprayed starter fluid and cranked up, a couple hours later it won't start up, need help?

    • @megaartd
      @megaartd 5 ปีที่แล้ว

      it could be fuse on battery for fuel pump

  • @diksady7761
    @diksady7761 6 ปีที่แล้ว

    why does the ceramic break?

    • @simonsays6924
      @simonsays6924  6 ปีที่แล้ว +5

      La2ndeGuerre ceramic plungers were on 2250 motors 2011-2013. After 200,000-300,000miles they break into particles and go into main bearing galleries. After that all engine basicly junk. Ceramic is like a sand it goes through all oil galeries , destroys everything.
      In 2013 cummins started put steel plungers. However they also can break and metal particles do the same like ceramic. I recommend to replace them every 400,000miles. It will be cheap insurance $500 versus $25000

  • @myofbmyofb5943
    @myofbmyofb5943 5 ปีที่แล้ว +1

    Every how many miles do you have to replace these

  • @Wonderviewco
    @Wonderviewco 4 ปีที่แล้ว +1

    How much did it cost for barrel, plunger, and tappets? And where did you buy those?

    • @simonsays6924
      @simonsays6924  3 ปีที่แล้ว +1

      Any cummins dealers. Like peterbilt or kw. Or you can go directly to cummins. But the price same. I dont remember exact price. It was arround $300 back then.

  • @glackaglack1534
    @glackaglack1534 ปีที่แล้ว

    What is that fuel pump #?

  • @eddiejimenez6107
    @eddiejimenez6107 6 ปีที่แล้ว +3

    How much was on all parts?

    • @AndreyBanyuk
      @AndreyBanyuk 4 ปีที่แล้ว +1

      $400 parts $300 labor

  • @sergeyb9381
    @sergeyb9381 4 ปีที่แล้ว

    У меня 15 года трак и 11/14 двигатель. Обращался к дилеру по поводу помпы. Дилер сказал, что там стоит помпа старого образца. Прочитал ваши комментарии о том, что камминс в 2014 году ставил уже металические планжеры вместо керамических. На траке 320 тысяч пробега. Что вы посоветуете?

    • @simonsays6924
      @simonsays6924  4 ปีที่แล้ว +1

      Jesli dva cilindra pompa, dve fuel lines vixodit to eto novovo obrazca.
      Jesli tri cilindra i tri fuel liniji uxodiat to eto staraya i ejio srochno nado meniat. Oni lomajutsia.
      Dvux cilindrovije pompi nado delat gde to 400,000-450,000 mil maximum.

    • @sergeyb9381
      @sergeyb9381 4 ปีที่แล้ว

      Я понял, спасибо. У меня 2х цилиндра.

  • @kobeljo
    @kobeljo 6 ปีที่แล้ว

    Здравствуйте.хочу спросить в одной коробке 2 плунжера?

    • @simonsays6924
      @simonsays6924  6 ปีที่แล้ว +2

      В одной коробке 1 plunger и 1 barrel. Они идут в паре.

  • @steveodens1064
    @steveodens1064 3 ปีที่แล้ว

    Cummins in Commerce City Co and the KW dealer in Kearney Nebraska both are telling me I can't just the tappets any more just the head with the upgraded tappets.
    I'll check again...maybe neither parts guys know.
    Thanks!

    • @AncientPharaoh
      @AncientPharaoh 3 ปีที่แล้ว

      Could you update please on this. Thanks in advance.

  • @sievesman925
    @sievesman925 6 ปีที่แล้ว +1

    What are the part #s for the cm2250?

    • @simonsays6924
      @simonsays6924  6 ปีที่แล้ว +5

      For 2250, plunger and barrel kit- #4327258
      Tappet -same # shown in video

    • @sievesman925
      @sievesman925 6 ปีที่แล้ว

      How about the gasket?

    • @simonsays6924
      @simonsays6924  6 ปีที่แล้ว +3

      Gasket #2872513

    • @jimmybrown169
      @jimmybrown169 4 ปีที่แล้ว

      Looking at a 2007 isx do they have this problem to

  • @suaaukeomy7162
    @suaaukeomy7162 4 ปีที่แล้ว

    Could I have some documents about the engine, please?

    • @simonsays6924
      @simonsays6924  4 ปีที่แล้ว

      What you mean documents? If you need manual register your engine sn at quickserve.cummins.com and you will get free manual.

  • @pierreandew3300
    @pierreandew3300 4 ปีที่แล้ว

    Hello can you any body please help me . I have 2010 Volvo vnl630 oil mix with the coolant in side the coolant reservoir does any one know or have an idea what may cause of that issue . Hey

    • @simonsays6924
      @simonsays6924  4 ปีที่แล้ว

      Oil cooler

    • @pierreandew3300
      @pierreandew3300 4 ปีที่แล้ว

      Oil in the coolant reservoir how do that happen, and how to fixe it

  • @02lswith22s
    @02lswith22s 6 ปีที่แล้ว

    I have a 2015 isx15. These have problems to on the fuel pump too then??

    • @simonsays6924
      @simonsays6924  6 ปีที่แล้ว +1

      02lswith22s you need to replace tappets. Mine is 2015. Tappets have brass bushings which are on recall. You can see difference in video.

    • @02lswith22s
      @02lswith22s 6 ปีที่แล้ว +1

      Ok so after I replace them do I replace them every 300k Miles after that so the metal tappets don’t break

    • @a13dgjmp13
      @a13dgjmp13 3 ปีที่แล้ว

      @@simonsays6924 where I can buy these parts? The dealers sell only fuel pump head...thanks

    • @simonsays6924
      @simonsays6924  3 ปีที่แล้ว

      @@a13dgjmp13 I bought at kenworth dealer but it was 2018 idk if they still sell. You need to tell part numbers. I also bought online using part numbers.

  • @salemebrahim2782
    @salemebrahim2782 5 ปีที่แล้ว

    how to get new part

    • @simonsays6924
      @simonsays6924  5 ปีที่แล้ว

      At your truck dealer. Give engine serial number.

    • @salemebrahim2782
      @salemebrahim2782 5 ปีที่แล้ว

      ENgine no 22117325

  • @andreyfedchik8356
    @andreyfedchik8356 5 ปีที่แล้ว

    А как узнать что они плохие? На моем траке мотор 2013 года но очень плохо тянет не даёт полный буст турбо, ето может быть связано с fuel pump. No check engine light.

    • @simonsays6924
      @simonsays6924  5 ปีที่แล้ว +2

      Nado podkliuchit cummins insite. Smotret kakoi fuel rail pressure. Dolzno bit okolo 30,000psi. Zdelat fuel system leak test. Nado sledovat cummins quickserve ukazanijam.
      2010-2013 bili keramicheskije plungers kotorije kokda lomalis, keramika smechaetsia s maslom i unichtozhaet dvigatel.
      Metalicheskije (titanavoje)derzhit okolo 500,000mil.
      Jesli budet check engine "low fuel rail" eto znachit shto pompa uzhe polamalas i dalshe exat nevzia, potomu shto oskolki metala poidiot v shaxti masla i unichtozhit dvigatel.

    • @andreyfedchik8356
      @andreyfedchik8356 5 ปีที่แล้ว

      @@simonsays6924 Иногда код загорается на fuel injector cylinder #6. SPN0655
      Fuel pump здесь уже поменян, но ета верхняя часть что ты снял, она красная осталась original. Может она плохая?

    • @simonsays6924
      @simonsays6924  5 ปีที่แล้ว +1

      @@andreyfedchik8356 eto verxniya chast - golova fuel pump. Tam stojit check valves. Kokda snimaesh golovu nado podovat vozdux (40psi)na fuel input. Plungeri dolzni vilezat obratno kokda nazhinaesh paltsem. Jesli oni nevilezajut znachit golova ploxaya.

    • @LK-un3cd
      @LK-un3cd 4 ปีที่แล้ว

      @@simonsays6924 Cummins ISL я делаю fuel rail pressure test давление поднимаеться до 21 000 psi. Ты не знаешь для этого двигателя это мало или норм.

  • @omarh4694
    @omarh4694 9 หลายเดือนก่อน

    How often they need to be replaced?

    • @simonsays6924
      @simonsays6924  9 หลายเดือนก่อน

      Every 300-350k miles

    • @omarh4694
      @omarh4694 9 หลายเดือนก่อน

      @@simonsays6924 I have an x15 and thinking about deleting,, does it cause premature failure to the engine? Have you done any deletes?

  • @MitzvosGolem1
    @MitzvosGolem1 6 ปีที่แล้ว

    roller tappets fail also. Check cam under pump head. Ruins motor.

    • @simonsays6924
      @simonsays6924  5 ปีที่แล้ว +2

      I replaced them aswell at 430k miles

  • @juanhuaytachallco7551
    @juanhuaytachallco7551 5 ปีที่แล้ว +1

    Español

  • @vinhtangquang8063
    @vinhtangquang8063 4 ปีที่แล้ว

    Hi you. Can you saw me one school their. Because i want to learn more about it your country..