DIY 3 WAY SPEAKER IN SIMPLE WAY/CROSSOVERS/PARALLEL

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ม.ค. 2025

ความคิดเห็น • 70

  • @renearcellana
    @renearcellana 2 หลายเดือนก่อน

    Ginawa ko 4way speaker super Ganda ang tunog pinong pino labas ang mga instrumento..

  • @jenrobstv
    @jenrobstv 9 หลายเดือนก่อน +2

    Simple pero malinaw ang pagkasunod sunod maraming salamat mas madali masundan lalo na sa mga baguhan

    • @josepepitobarruga2677
      @josepepitobarruga2677 4 หลายเดือนก่อน

      Sige sundin mo yan para maging camoteng kahoy ka narin...siraulo yang vlogger na iyan..MALI ANG TURO NYAN!!!!!😡😡😡😡😡😡😡

  • @jessicaembers924
    @jessicaembers924 6 หลายเดือนก่อน +7

    Ya, but you forgot to Cut the tweet high Out of the mid, and the Mid high OUT Of the woof! 8ohms on the bottom, 4 ohms on the mid, and 3 ohms on the High, frequency. If you're using 4 ohm speakers to start with, be very careful what Amp you're using?

    • @SHIVBASS
      @SHIVBASS 4 หลายเดือนก่อน

      Thanks

  • @tanadipadhikari3013
    @tanadipadhikari3013 2 ปีที่แล้ว +4

    both capacitors valu ???

  • @daisyvidad9522
    @daisyvidad9522 3 หลายเดือนก่อน +1

    Napaka linaw mag turo boss.. salamat sa tips sana poh tinapus nyu pa hanggang pagkabit sa amplefier ...

    • @genexissoundmaster9145
      @genexissoundmaster9145  3 หลายเดือนก่อน

      Babae k po?

    • @daisyvidad9522
      @daisyvidad9522 3 หลายเดือนก่อน

      @@genexissoundmaster9145 lalake di Po kc Sakin tung email na ito

    • @daisyvidad9522
      @daisyvidad9522 3 หลายเดือนก่อน

      Paano Po kapag Yung sa Gitna ng speaker ko ay 100W at Yung dalawang sa Gilid ay Tig 40W

  • @diosdadojr.manghino8518
    @diosdadojr.manghino8518 10 วันที่ผ่านมา

    The wire of the tweeter must before the capacitor of midrange

  • @johnsonranario9094
    @johnsonranario9094 25 วันที่ผ่านมา

    Should put dividing network for protection and clean sound.

  • @JomarCatuiran
    @JomarCatuiran 27 วันที่ผ่านมา

    Kaya kaya Yan boss sa Isang channel ng amplifier

  • @abhimanyusingh9570
    @abhimanyusingh9570 2 ปีที่แล้ว +4

    What value of capacitors u used for midrange and tweeters. Tell in uf

    • @nicoinigo7164
      @nicoinigo7164 2 ปีที่แล้ว

      6.8uf pag mid

    • @southtools5498
      @southtools5498 2 ปีที่แล้ว

      @@nicoinigo7164 pag sa tweeter po ilang uf

    • @daandyen
      @daandyen 11 หลายเดือนก่อน

      Depends on your amp

  • @danilodelacruz7546
    @danilodelacruz7546 5 หลายเดือนก่อน +1

    Ilang ohms ba lahat Yan bawat Isa

  • @tahirtufailch2078
    @tahirtufailch2078 3 ปีที่แล้ว +2

    Witch capestr instal teutr and mid

  • @quirinovillanueva8122
    @quirinovillanueva8122 6 หลายเดือนก่อน +1

    Salamat SA simpling pag paliwanag

  • @DonD-rb1mr
    @DonD-rb1mr 7 หลายเดือนก่อน

    Why you hook them together..
    I go Sub to sub source
    Mid to mid source..
    Tweeter to source .
    How can u get mid and bass from one speaker?

  • @whatever895
    @whatever895 2 ปีที่แล้ว +1

    speaker 4 ohms ? then parallel x 3 so 12 ohms ? you loose 1/3 power from amp ?

    • @8bandstd
      @8bandstd 2 ปีที่แล้ว +2

      i think they are still 4 ohms bcz when connecting 2 or more speakers in parallel with a capacitor it wont affect impedance as i think

    • @pacoluchavez7690
      @pacoluchavez7690 ปีที่แล้ว +2

      Thats right even if add another midrange a total of 1 woofer + 2 tweeters and another 1 midrange speaker with capasitor for vocal, still the empedance still the same, because the 2 tweeters and 1 midrange have individual capacitor

    • @reynaldvillaceran1662
      @reynaldvillaceran1662 ปีที่แล้ว +1

      Absolutely correct.

    • @johnpaulgarcia6792
      @johnpaulgarcia6792 ปีที่แล้ว

      @@pacoluchavez7690 how about if I connect 3 tweeters following the connection in this video,will the impedance of the tweeters add or not having each tweeters a capacitor with the same value

    • @pacoluchavez7690
      @pacoluchavez7690 ปีที่แล้ว

      @@johnpaulgarcia6792 the impedance of the 3tweeters will no longer affected or add to the impedance of your total or woofer impedance, because each tweeter have individual capasitor

  • @jonisabado6390
    @jonisabado6390 7 หลายเดือนก่อน

    Anong specs ng sub woofer , midrange, tweeter mo po? Pati naren capacitor value ano ginamit mo boss ?

  • @UndercoverSkinner
    @UndercoverSkinner 3 ปีที่แล้ว +8

    Do you really need to add the capacitors?

    • @kb_acoustics
      @kb_acoustics 7 หลายเดือนก่อน +1

      Yes, because the speakers impedance will be the impedance of the woofer. the capacitors filter the frequencies and switch them off the ohmic cycle, they will be like neutral in that cycle. That's why u need them.

    • @nanau2002
      @nanau2002 4 หลายเดือนก่อน

      ​@@kb_acousticshi,please help me,i have 4 speakers (woofer 8 ohms,two mids 4 ohms each and a tweeter 4 ohms als,If i wire them in paralel i can t get more than 4 ohms and the amplifier îs supporting 6/16,i don t want to wire them in serial,so You Say that If i put capacitors to mid and tweeter there will be 8 like the woofer?

  • @BGC
    @BGC 2 หลายเดือนก่อน

    Technical ang pagkabit ng speaker. Wala nga nakalagay ano bawat impedance ng driver to make it total 8 ohms sa generic amplifier sa pinas na meron din 8 ohms impedance. Hindi pwede basta mo na lang i parallel na wala ka din crossover. Pwede yan kung gusto mo masunog ampli mo o speakers😂

  • @newnixsantos3430
    @newnixsantos3430 ปีที่แล้ว

    Boss pede ba sa gitna ilagay ung twitter at pang huli namn ung mid? Wala bng prob dyan same lining nmn din ng mga wire pero sa gitna ilalagy ung twtter?

  • @danilodelacruz7546
    @danilodelacruz7546 5 หลายเดือนก่อน +1

    At Saka ano ang sukat ng diameter niyan

  • @RenzlovesLoves
    @RenzlovesLoves 3 หลายเดือนก่อน

    Pwede man yan baliktaran wire

  • @jovenchitz8577
    @jovenchitz8577 10 หลายเดือนก่อน +1

    Boss parallel connection yan? Nung ginanyan ko ang 3 speakers ko na 8 ohms at ampli na 8 ohms din eh delikado sumabog ampli ko kase lalabas na ang total empedance ay 2ohms.

    • @Alvin-qz6ub
      @Alvin-qz6ub 2 วันที่ผ่านมา

      Sakin ginawa ko serries mid and high then parallel sa base ang labas nun 5. Somthing ohms 4yrs n natunog prin hnd nasira until now halos todo nung dec 31 2024

  • @ivironpamintuan9526
    @ivironpamintuan9526 8 หลายเดือนก่อน

    Bos di ba pwede sa wire nalang i parallel?? O dpat talaga sa terminal?

  • @rockycurtina9950
    @rockycurtina9950 21 วันที่ผ่านมา

    anong sukat nang capacitor?

  • @johnpaulgarcia6792
    @johnpaulgarcia6792 ปีที่แล้ว

    okay lng po ba gnyan na connection pag sa tweeter po??3 na tweeter po ganun

  • @RegieDelaCruz-p4k
    @RegieDelaCruz-p4k 5 หลายเดือนก่อน +2

    bkit yung sakin boss ganyan din naman wirings ko di tumutunog yung tweeter yung midrange lang 2.2uf capacitor sa midrange ganun din sa tweeter

    • @genexissoundmaster9145
      @genexissoundmaster9145  5 หลายเดือนก่อน

      Baka sira na ung wire or mgkakadikit linya

    • @Kamigo-qw2mn
      @Kamigo-qw2mn 3 หลายเดือนก่อน

      Mali Kasi pagkakalagay nya sa positive ng tweeter nya, Doon nya Kasi kinuha sa midrange kung saan Meron capacitor...may capacitor na nga tweeter tapos Doon Kapa kukuha sa may capacitor ulit?😂😂😂😂😂

    • @sanycueto7511
      @sanycueto7511 2 หลายเดือนก่อน

      Saan lang boss may capacitor dapat?​@@Kamigo-qw2mn

    • @lewispaultan4243
      @lewispaultan4243 2 หลายเดือนก่อน

      Tweeter mo po sira na sakin ganyan ngyari parepair ko tweeter ko ayaw tumunog

  • @nanako285
    @nanako285 2 ปีที่แล้ว +4

    In parallel, what happens to ohms, is it divided by the number of speakers or added together?

    • @redzcodilla8572
      @redzcodilla8572 ปีที่แล้ว +1

      Wala naka lagay ina abangan kopa naman

    • @reynaldvillaceran1662
      @reynaldvillaceran1662 ปีที่แล้ว

      Nothing bcoz of the capacitors.

    • @nickdibart
      @nickdibart ปีที่แล้ว

      It's going to be hard to read from a YT comment, but the formula is this: total impedance = 1 / ((1/imp1) + (1/imp2) + (1/imp3) +...)
      If you only need to calculate it for two speakers in parallel, there is a formula that's easier to use: (imp1 x imp2 / (imp1 + imp2). As I said, it only works when there are 2 speakers.

  • @kuyadonchannel4643
    @kuyadonchannel4643 3 ปีที่แล้ว +3

    Anong tawag sa capacitor dun sa kinabit sa midrange at twiter bossing? Salamat

    • @genexissoundmaster9145
      @genexissoundmaster9145  3 ปีที่แล้ว +1

      Pg bibili po kyo.. itnong nyu lng ung capacitor para sa tweeter at midrange

  • @pungayguevarra6655
    @pungayguevarra6655 ปีที่แล้ว

    Pls ilang ohm Ang mga capasitor tnx po

  • @pungayguevarra6655
    @pungayguevarra6655 ปีที่แล้ว +1

    Boss ilang ohms capisitor mo

  • @reynaldvillaceran1662
    @reynaldvillaceran1662 ปีที่แล้ว +3

    Very good tutorial video.straight to the point.wala ng masyadong maraming pasakalye tulad nung iba.puro arte.

  • @danilodelacruz7546
    @danilodelacruz7546 5 หลายเดือนก่อน

    At ano nga Pala ang value ng mga cap

  • @elyzelalbarida3820
    @elyzelalbarida3820 ปีที่แล้ว

    Paano po pag 4 ohms woofer parallel to midrange at tweeter,magiging 4 ohms pa rin ba ang woofer?

  • @DanTangean
    @DanTangean ปีที่แล้ว

    😊

  • @richardsedicol226
    @richardsedicol226 7 หลายเดือนก่อน +1

    sir ano pp wattage ng bawat speaker?

  • @guillermoespinoza3070
    @guillermoespinoza3070 2 ปีที่แล้ว +2

    Pésimo video.
    Una pérdida de tiempo.

  • @frankiris8
    @frankiris8 2 ปีที่แล้ว +1

    No good. Very bad and hazard.

    • @charlespatterson9138
      @charlespatterson9138 ปีที่แล้ว

      lmao hazzrd? from what lol if these items could cause.u anything hazardous in ur mind aside from getting smacked in the head with a speaker u sir should not play with these toys and be care of.ur toothbrush ... hazards man

    • @frankiris8
      @frankiris8 ปีที่แล้ว +1

      @@charlespatterson9138 sorry... I was drunk. LoL.