People learn to read. You don't get the pattern for free you buy it on his Esty. Great job and hope these people learn to read and buy your projects...
Might work with Degas blades. The issue might be accuracy, as the blade will have a tendency to drift when pushed too hard, too fast or in dense wood, like maple etc.
I use glue "88" of ukrainian production (instruction: apply glue on both surfaces , wait about 5-10 minutes untill glure dry (recommended, but not necessary), squeeze the glued surfaces), someone wrote that similar glue in USA calls Contact cement
Sorry, I thought you asked about glue. For patterns I use self-adhesive paper "Crystal" - it is very comfortabe - you can use usual printer to print pattern
you simply drill a very small hole inside the portion you want to remove. Remove your blade from the saw and put it through the drill hole and re-attach to the saw and begin cutting.
Alex, when making these projects, how much is the video sped up by? 2x? Just curious to see how fast you actually cut. I've had a hard time judging my speed while working, both of the saw blade and how I move the wood. Thanks.
Mr. Alex, this inlay is really a masterpiece, so delicate and impressive, thanks for your expertise teaching. Just a question, what site did you get this drawing patterns?, I´ll appreciatte your help.
Sorry for commenting on such an old video, but what kind of blade and size did you use here? I just got into scrolling and I'd love to do projects like this, but I think my blade is too thick to really make this work.
Hi, almost for all my projects (3-6 mm thickness of wood) I use Flying Dutchman Ultra Reverse blades, #1 allows to make sharp corners and accurate cuts
I use glue "88" of ukrainian production. It is universal glue for wood, plastic, rubber and ceramic. Someone wrote that similar glue in USA calls Contact cement
Très belle réalisation. J'aime le bois. Le seul hic il faut une scie à chamtourner mécanique, que je ne possède pas ! Et faire avec une scie manuelle cela prend beaucoup de temps.
Buenas tardes Tengo varias preguntas 1- ¿que marca de maquina usa? 2- ¿que tipo de sierra es con la que corta? 3- ¿que grosor de triplay recomienda? 4- ¿qué pegamento usa? 5- ¿el papel como se llama para imprimir? Le agradezco mucho su respuesta para proseder a comprarle sus plantillas.
In this video I use Jet JSS-16, now I have Pegas 16CE. Blades - Flying Dutchman ultra reverse #1. Wood - birch plywood 4 mm. Glue - calls "88" (ukrainian production, universal glue for wood, rubber, plastic, glass). Paper - self adhesive paper (sticker paper) "Crystal". I hope this informtion wil be usefull for you
fishtank5050 Yeah I know about that, its just when using wood that thin ,it is easy to stack cut with two pieces of different colors. Either way is ok, I just prefer not to use stains or paint.
Very nice. I agree with the earlier comment of using two different coloured woods stacked together. That way you get two for the price of one. One small suggestion, turn your music off in the background when you know you are going to speed up the showing of the process.
Why not do two at a time and cover each one with iron on veneer. Just iron on the veneer and save the paint process. Some beautiful veneer out there. Later
Hello, my city (Kherson) is occupied by the Russian military, it is quiet now, but sometimes explosions are heard outside the city, I have stocks of food and essential goods
Very nicely made, love the bevelled edges, gives it bit more depth.
Nice thick varnish, what brand/type may I ask?
Thanks, I made this project years ago, and I dont remember what brand I used
People learn to read. You don't get the pattern for free you buy it on his Esty. Great job and hope these people learn to read and buy your projects...
very nice ; love the cats. any dog ying-yang ones ?
Thanks for watching, unfortunately I don't have such dog pattern
@@AlexFoxScrollsaw i am going to attempt a design tomorrow with roses ; first big challenge as a newby on scroll saw
muy buen trabajo, que tipo de papel usas para pegarlo a la madera ¿?
Yo uso papel adhesivo "Cristal"
nice work, have you thought about 2 different types of wood, stacked during the scroll saw process?
Might work with Degas blades. The issue might be accuracy, as the blade will have a tendency to drift when pushed too hard, too fast or in dense wood, like maple etc.
hi where did you get the pattern from please
hi, write your email and I send it or contact me - alexscrollsaw@gmail.com
Alex, Is this design still in your etsy shop as I could not see it
Hi, write your email and I will send it, or write to me alexscrollsaw@gmail.com
This is very cool. I just subscribed. Im thinking of getting a scroll saw. Any recommendations.
Hi, it depends on your budget, I use Pegas 16CE. If you can afford it - do not hesitate, I think it is one of the best scroll saws
@@AlexFoxScrollsaw thank you.
Отличная идея! Очень добрая поделка! :) Клей-88 порадовал ;))
Спасибо за видео, удачи Вам в творчестве!
Спасибо за просмотр
Hi just learning wood work is thus design available please
Kind regards Belinda
Hello, I made this project long time ago, and I dont have pattern now
Beautiful idea, thank you for the inspiration
Thanks for watching
Now what do you do with it? Maybe a coaster ???
Glue it on top of a box?
You can use it as a trivet
What kind of glue did you use to stick the pattern onto the wood ??
I use glue "88" of ukrainian production (instruction: apply glue on both surfaces , wait about 5-10 minutes untill glure dry (recommended, but not necessary), squeeze the glued surfaces), someone wrote that similar glue in USA calls Contact cement
Sorry, I thought you asked about glue. For patterns I use self-adhesive paper "Crystal" - it is very comfortabe - you can use usual printer to print pattern
Why did you not show the more difficult cuts, the eyes, whiskers, ears. It would have been nice to see how you got the blade in there to cut.
Because you don't deserve it
you simply drill a very small hole inside the portion you want to remove. Remove your blade from the saw and put it through the drill hole and re-attach to the saw and begin cutting.
quel est ce papier adessif que vous utiliser? merci
Thanks for watching, answered by email
Un saludo desde Chile como se llama la herramienta con que haces los trabajos , con que los cortas
Gracias
Thanks for watching, it calls Scroll saw, model - Jet JSS-16
Nice work! how did you do the moustache and the nose of the cats?
Hi, I cut it the same way as other - I used small drill and blade
Alex, when making these projects, how much is the video sped up by? 2x? Just curious to see how fast you actually cut. I've had a hard time judging my speed while working, both of the saw blade and how I move the wood. Thanks.
Usually I speed up by 2x
Pretty darn nifty.. I have and use a scroll saw, but lack the patience for tight corners and such..
Mr. Alex, this inlay is really a masterpiece, so delicate and impressive, thanks for your expertise teaching. Just a question, what site did you get this drawing patterns?, I´ll appreciatte your help.
Thanks, most of patterns at www.etsy.com/shop/AlexFoxUA
Sorry for commenting on such an old video, but what kind of blade and size did you use here? I just got into scrolling and I'd love to do projects like this, but I think my blade is too thick to really make this work.
Hi, almost for all my projects (3-6 mm thickness of wood) I use Flying Dutchman Ultra Reverse blades, #1 allows to make sharp corners and accurate cuts
@@AlexFoxScrollsaw Wow, thanks for the response! What types of wood do you typically use?
I use glue "88" of ukrainian production. It is universal glue for wood, plastic, rubber and ceramic. Someone wrote that similar glue in USA calls Contact cement
Très belle réalisation. J'aime le bois. Le seul hic il faut une scie à chamtourner mécanique, que je ne possède pas ! Et faire avec une scie manuelle cela prend beaucoup de temps.
Que bonito trabalho, gosto imenso como ficou.
É possível eu ter a imagem dos gatos por favor?
Obrigada.
Obrigado, escreva seu email e eu enviarei
Acabou de enviar
@@AlexFoxScrollsaw Muito obrigado.
Cumprimentos.
pretty neat i will have to make one for my son who has a cat
Thanks for watching
where can i get that patten. love it
Write your e-mail, I will send it
Amazing and beautiful work. Do you remember what brand and type of blades you were using? Pinned or unpinned?
Hi, I use only unpinned blades, I dont remember which exactly I used, but now I use Flying Dutchman ultra reverse blades #1
Buenas tardes
Tengo varias preguntas
1- ¿que marca de maquina usa?
2- ¿que tipo de sierra es con la que corta?
3- ¿que grosor de triplay recomienda?
4- ¿qué pegamento usa?
5- ¿el papel como se llama para imprimir?
Le agradezco mucho su respuesta para proseder a comprarle sus plantillas.
In this video I use Jet JSS-16, now I have Pegas 16CE. Blades - Flying Dutchman ultra reverse #1. Wood - birch plywood 4 mm. Glue - calls "88" (ukrainian production, universal glue for wood, rubber, plastic, glass). Paper - self adhesive paper (sticker paper) "Crystal". I hope this informtion wil be usefull for you
very nice work.
which scroll saw we use???
I use Scroll saw Jet JSS-16
where I this pattern? cant find it on your etsy page.
Hi, it is not my pattern, I found this image in the internet, write your email and I will send it
Have you considered stack cutting with different colored wood? Thanks for this video.
I dont make stack cutting
Thanks for your reply Alex would it be possible to post some to me please your work is wicked mate
all my patterns at www.etsy.com/shop/AlexFoxUA
I can't find this pattern on your website.
Hi, write your e-mail and I will send it
mbpdcsi@yahoo.com Thanks for your help. My wife will live this. We have 5 cats.
Nice piece. I am just curios why you chose to paint it, rather than using two different types of wood ?
I like using stain + when I was making it I had only birch plywood
MikeHunt I think that because it was cut from one piece the two parts will fit back together better..
fishtank5050, yes it is one more reason for using stain instead two types of wood
fishtank5050 Yeah I know about that, its just when using wood that thin ,it is easy to stack cut with two pieces of different colors. Either way is ok, I just prefer not to use stains or paint.
MikeHunt that's a cool idea. You wouldn't like my work on here I've done with a router..kingfisher, koi carp.ive painted my wood..lol
Bello 😍😍👏
Thanks
Real nice work.
Thanks
Que madera es !
Thanks for watching, for this project I used baltic birch 1/6 inch
Very nice Alex ☺
Thanks
Thanks
Nice..can i paste your projects Alex..
Que lindo seu trabalho parabéns!!amo Gatos 🐾🐾onde vc mora ? Beijos 🐾 🐾🐾🐾🐾🐆
I think that's awesome 😊
Thanks
мне оченъ понравилсъ, хорошая работа.
Thank you
Hermoso trabajo. Me gustaría poder hacerlo. Sería posible poder compartirme está imágen y la del cats puzzle. . gracias de antemano. 😺
just sent
@@AlexFoxScrollsaw Gracias por compartir tus conocimientos y habilidades por este medio. Muchas bendiciones y éxitos 🙏🙏🙏
Hi, Alex, I asked you some 4 months ago if you would send me the pattern for the cats but still not received it yet, thank you.
Write your e-mail
I did give it to you before it is wiljodo22@gmail.com
Nice and funny. Love from Indonesia.
Thanks for watching
Super cool and beautyfull
Thanks
Very nice. I agree with the earlier comment of using two different coloured woods stacked together. That way you get two for the price of one. One small suggestion, turn your music off in the background when you know you are going to speed up the showing of the process.
Thanks for watching
Ola muito bom como faço para comprar esse projeto dos gatos.OK
Escreva seu e-mail e eu o enviarei para você
Why not do two at a time and cover each one with iron on veneer. Just iron on the veneer and save the paint process. Some beautiful veneer out there. Later
Interesting idea, thanks
Exelent job congrat
Thanks
hermoso tu trabajo 😁
Are you OK?
Hello, my city (Kherson) is occupied by the Russian military, it is quiet now, but sometimes explosions are heard outside the city, I have stocks of food and essential goods
@@AlexFoxScrollsaw I hope the madness stops soon. I'll pray for you and All of Ukraine. Stay safe!
( Eric Van Zipper) The same way you get to Carnegie Hall : Practice... (Pretty work)
Hola igual me puede compartir el plano por favor
Hi, write your email and I will send it
No me a llegado nada
i loves yin yang's (i also make one in roblox cats life 2,one of them is yin other is yang and the last one yin yang)
*Good job*
Thanks
Very nice
Hola, me pasarias la imagen?
escribe tu correo electrónico y lo enviaré
cervillla@gmail.com
No indica o muestra como iniciar los recortes internos y como que no se vale, pues así no es enseñanza.
No es un video tutorial, pero si tiene alguna pregunta, puede preguntar
amazing
Thanks for watching
Well done!
can you send the pattern to my email
i found it on google image search and used the snipping tool to transfer to word for printing
Very interesting video :))
Philosophically.
Thanks for watching
נהדר אני ממליץ לכל פנסיונר ללמוד את זה
Awesome
Lol this my home work. Me leave in russia
Thanks for watching
Holy ads
Vraiment trop long pour un coup de pinceau !
Thanks for watching
S
Thanks for watching
陰と陽
that is awesome! will email a pattern to me
write your e-mail
Alex Fox sandywinka@gmail.com
cool! come to visit us on the channel . like518
Way too much time watching you "paint" your projrct!! Right around 13+ minutes out of a a 15+ minute video?? Cute project but come on??
Hello, thanks for your opinion. It is my old video, now I make 3-5 min video to show all stages of process and final result.
@@AlexFoxScrollsaw Good idea! I meant no disrespect but felt that you were losing out on good air time! God Bless!
День добрый. А можно чертёж на jurez76@gmail.com
Спасибо
Отправил
Well defined Skill level. Thank you.
Thanks for watching