How to Replace Serpentine Belt Tensioner 2001-07 Toyota Sequoia

Buy Now!
New Serpentine Belt Tensioner from 1AAuto.com 1aau.to/ia/1AEB...
The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off. This video shows you how to install a new TRQ tensioner pulley in your 2001-2007 Toyota Sequoia.
• Check here for more videos on the 2001-2007 Toyota Sequoia: • Toyota Sequoia 2001-2007
This process should be similar on the following vehicles:
2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia
Tools you will need:
• 12mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 12mm Socket 1aau.to/oa/1AXA...
• 14mm Socket 1aau.to/oa/1AXA...
• Hose Clamp Pliers 1aau.to/oa/1AXA...
• Pliers
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXA...
• Drain Pan 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Toyota Sequoia 2001-2007: • Toyota Sequoia 2001-2007
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@henryperez1715]

First of all, I want to thank you for putting this tutorial up. I have a 2004 Toyota Sequoia with 300,000 miles! I only use it to commute to work which is 30 miles round trip. I'm happy with my truck and I haven't had a car payment in over 10 years. I followed everything to the T and you were on point. I feel so proud of myself 😊
Thank you

[@Laredo-c7g]

THANK YOU for NOT calling a fan clutch a "clutch fan" 👌

[@nj2mddude205]

Thanks for the video. I now understand why this service is so costly.

[@LH-kz2nf]

The video was labeled "How to change serpentine belt 2001-2007 ....."
There was no need to remove anything but the skid plate on my 06. Can't imagine what the labor charge would be for all of that, hope it's not for a customer .

[@User87398]

Easy change only bearing of tensioner pulley. Chipper and save a lot of time

[@dtchevy7317]

I just finished the job thanks for makin look so easy!!!

[@AmericanGearheadGarage]

This video saved my bacon. And thanks to all the coin I saved following this video, I can go and buy lots and lots of bacon! Thanks for the detailed explanation. You made this fix super easy. Well almost. That fan clutch was a bear. Other than that, it was much easier than I expected. Thanks again!

[@sewagner504]

Thank you so much for this video. I have the Haynes book and they skipped a lot of steps. I should have watched the whole video through though. I reassembled everything before putting the new belt on 🤦‍♂️

[@TRQ]

+Juan Shagner Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@zacatecas2]

You don't have to remove all that watch a nother videos is to much job I did my sequoia 04 only I remove the cover from the bottom

[@MarshallBLewis]

Agree. I'm gonna put up a video showing the bare minimum. Half as much work and messing around

[@TRQ]

+Eliseo Ureño Carrillo Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@gregoriogregorio22]

😂😂😂😂

[@tristanramos593]

Followed the same steps for my 100 series land cruiser.

[@Werthmkoo]

What year

[@tristanramos593]

2000

[@Mysticlyonenterprise]

Preciate this,doing one early in the morning.👌🏾

[@SlimNubster]

Can you just replace the pulley, instead of the entire assembly, to avoid removing all those parts?

[@bardinkurtis]

Why no torque specs for the tensioner?

[@raydoporto]

Thanks for video saved me alot of time

[@leprechaunlune]

El video es muy informado! Gracias amigo!

[@TRQ]

+@leprechaunlune Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@undonefun]

I found with my fan shroud came off and slid past the fan ( just trying to contribute some info.☺️

[@mikeh3774]

Great video! Thank you!

[@undonefun]

Thanks from me too. What a beatdown...

[@clanteh]

Does the tensioner bolt need to be slightly loose? If mine is fully tight, it locks up and doesn't spin. If I loosen it about half a turn, it spins freely with no noise

[@jeanniedollinger5736]

How long did that take you? Please and Thank You!!

[@timw9353]

Remove 14mm center nut on tension pulley (reverse thread) and press in new bearing. Easy peasy

[@AtomicSea]

TFW you’ve assembled everything, and you find a 12mm bolt lying around…. Now I have to go back and find out where I need to put it

[@deathnsd6953]

that coolant is a NO NO on those toyotas...pink only

[@stateboy80892]

What's giving me an issue is the fan/clutch, it refuse to come off of its pulley!

[@RV-ds5uf]

I was gonna try doing this myself but damn that’s a lot of work nevermind!!😳

[@gregoriogregorio22]

😂😂

[@bfopaul]

Thanks bud

[@mlopez5753]

Amazing content 👌 👏

[@manuelortiz6407]

Like you video,good work

[@Dew_Dew22]

You definitely don't need to take off that hose