Whenever I watch your videos where you’re cruising along in the big blue beast, I can barely keep my eyes open. That rumble is like a lullaby and puts me right to sleep.
I like how you let DP check it out. That’s a good way to sell a piece of expensive equipment by letting it be tested out. Your reputation as an honest and reputable equipment company speaks volumes. If I lived closer I’d be proud to work for you. I like the channel
Love the sound of the straight pipes on that beautiful Pete. That’s a really nice dozer too y’all did a very good job rebuilding it. Letting a customer and equipment owner operator operate it for you to make sure everything works is a great thing to do I think for any thing someone puts work in to before they sell it. Really shows the quality of work y’all do and that yall want to make sure everything thing is good to go be for y’all put it up for sale means a lot. great job all the way around.
It's awesome that you cameo with @DirtPerfect and @CaptainKleeman. You all seem to work well and bounce the slapstick comedy off each other. It's some of the best laughs I've had over the last couple years. Keep it up Clint and the A-Team!
I found your channel after watching DP test out the dozer. I like what I have seen so far. Keep up the great work and videos you make. Enjoyed watching you rebuild the engine and have been watching your videos on the M46 rebuild. Can't wait to see the next installment on that.
That was really nice to see both 850's side by side. They both actually appeared to be working well. Also was a nice way to conduct business by letting Mr. DP try it out for a few day. More than likely it's sold to Mr. DP. And it's green . Great vid Mr. Clinton keep them coming
Hi Clint Good to see you and DP are on good terms after the hiccup. Also great to see a crossover between TH-cam channels. Thanks for sharing. Michael (from Scotland)
The person responsible for the "hiccup" is gone and the company has gone above and beyond in support since finding out about the issue. Time to let this go.
@@C_CEQUIPMENT Clint yalls company really does speak volume. I’ve always said what makes a good business is the support behind it. Keep up the great work
Thank you for sharing your video with us. It reminded me as kid going to work with my dad. Your going to miss it when you get old like me. Thank you again!!!
Clint, hats off to you for this video! It clearly shows the importance of Dealer and Contractor relationships as well as in this case, with a dozer, a quick look at the basics of how problems can be solved and overcome! It also shows great footage of your rebuild, testing not only by you (C&C) but Mike of Dirt Perfect. That creates a great selling point in my view and I would further trust the review of someone like Mike than a salesman from your big name dealer. You also showed great footage of Mike and Jerry's tandem pushing and that is a great learning example of operating techniques to maximize pushes! We also see the old school B model vs the newer J model and that can be a great selling point. Mike has done an excelling job alone with Jerry in showing the differences between the models. It also further builds trust, and integrity as a dealer to not only test out a machine on a customer's project, but you can help out a customer by leaving it with Mike, which he can better test it for you. Also, I would be interested in hearing Mike's opinion of this J compared to his unit! I think it would be an advantage for both you as a dealer and your customers to do more videos like this. You can even make it educational to cover things to look for when buying equipment, repairs... Mike does an awesome job taking us along for his repairs! So many dealers are just using social media to sell their units... an overall of the unit, make, model, a quick look at the blade, the undercarriage, and a quick shot of operation that is 5 minutes or less. Screw that! That is a typical dealer and greedy salesmanship! I would be more apt to buy from you and this unit (if I had a need for a JD 850 J) than some others. One thing I cannot stand is watching these other dealers show a piece of equipment, hop on it. start it up and full throttle it! I'm sure you know the dealers I'm referring to here on TH-cam! I don't know any sensible operator that does that! I have seen some smaller Komatsu and older Cat (B & C models) I was interested in and then I see that??? They lost the sale right there and I don't care if they already had it warmed up and running for 8 hours! From what transpired I won't mention these other dealers. So awesome job here and use opportunities like this to better your business and work with your customers. It's a win-win in my eyes! Someone like Mike with his following and I have been following him from the beginning, he can definitely help you sell machines. Just look at Truck and Track with the discount codes. LOL Again hats of and hope to see more videos like this and with other customers! Major kudos! How you have handled everything Clint really shows you are setting the bar higher for other dealers. You have shown that when a problem or dispute happens, you as a dealer you are right there to listen, understand the problem, the customer's need, and provide solutions! That is true dealer support! Awesome job Clint and make DP give you a pat on the back!
Yes, keep 'em coming -- great stuff seeing actual professionals testing the equipment out in a real world environment - great for them and great for you and C&C. How could it not be a Win-Win for everyone!
I'm getting hooked watching videos of 850J's. Amazing how quiet the cabs are. It's neat that you left it for use at the site to rectify the _dam_ situation. I can't say that I ever recall an equipment dealer who would do that - Kudos!
I found you through DP Mike saying you had a quality channel and danged if I haven't been watching even old videos of yours... a real treat. Your a mans man in my book Clint. I like the way you keep things light in the shop as there is way more than just showing up for work. A man wants to work where he has room to grow and to fit in with a crew. I am still trying to find the video of the logs being split like in your entro. Thats something I have been investigating even though I'm in my seventies, and never to have hands on any equipment... well one youngster wants me to teach him how to run his mill. I have built as many mills as there are different kinds... almost as I did discover a good many from overseas that show some merit. I kinda think Mike is doing with Matt what your doing with your son Hunter. No better way to get feet wet
Thanks If you look under my playlists There should be one titled Halverson It will have some splitting videos in it Here is a link th-cam.com/play/PLbdveHlgP0_DE6wqbwxaoLgQqB5Me8wf5.html
Very nice machine you rebuilt sir !And hell yes Clint , I absolutely love these heavy machinery , heavy hauling ……. What red blooded ,bacon eating American wouldn’t love watching this stuff ? ❤️😎
I got a kick out of this video. I watched Mike’s video earlier and then this one and it was cool seeing things from different angles. You got a new subscriber now.
Hmmm, it appears I missed this vid at the time you first ran it. Interesting to watch the two tractors working together, pushing a lot of dirt. Knowing what DP ends up doing with the 850J is really funny.
Interesting and impressive rebuild and excellent sounding and working finished product. This and the 2 part engine rebuild deffently shows you go all the way to do it right and no cornors were cut to save cost.
As a Dirt Perfect Fan ... All I have to say is Great Job C&C Great Support and Way to go on testing your own products with your customers. May you and C&C Equipment continue to have success with all you future Endeavors. 👍👏
That is what i was looking for at the time.... A Komatsu D21 and a D21S track loader. Didn't see Clint have any in inventory at the time, what a shame! I would have bought from him instead! I wouldn't mind finding a Cat D3 B or C and a Cat 931 or a 933. I love old iron and the style of them. Perfect size for my small compact jaw crusher and 3 way screener.... crush and recycle asphalt and concrete. Also do composting and looking for a old Cat 910 wheel loader.
Hi! I really enjoy your videos ! I worked a D6C and D6D back in the 70s and 80s until my dad retired and I miss it! The sounds and the smells, well you know! Anyway, I’m old school and it’s fun to watch different ways because there is more than one way to skin a cat!! Keep it up!!
The fact you handle business the way you do is awesome man , you could have went totally the other way but you didn't. And I'm now a subscriber and possibly a future customer ,we need more like ya
Just watched 1st video Iam a big fan of Dirt Perfect it was great to see how you stepped up worked with Mike on 850j great service 👀 forward to your next Al from Nova Scotia Canada 🇨🇦
One other comment, the way you stepped up and made the 850 J that Mike bought from you right, speaks volumes of the way you do business. That just doesn’t happen much any more. I would do business with you and I don’t do dirt work, now lifting equipment, different situation. Take care!
Ok, 5:00 A.M. here I set with eggs, bacon, toast, and coffee with a little hydraulic oil for the coffee and a little dirt for the seasoning on the eggs, grease for the toast and watching two great you tubers going at it. What a way to start the day. And then for desert we have Jerry on the 850 B Thanks guys. It’s going to be a great day I tell yah!!!👍😉😀
Enjoyed the video. Glad to see that you actually go and test out the equipment before you sell it. Bet it saves you in the long run for warranty claims. Next time you should drag out a 1050 to DP. Bet that would get his wheels turning 😂.
BEAUTIFUL Truck, tractor and trailer combo!!!! A guy can dream right?? I just need one of those real clean JD 455 track loaders with the clam shell bucket on it, that you had a few of the last several years.
@@C_CEQUIPMENT Yes, that's what worries me. I do believe they will make a comeback though. They can only make the tracked skid steer machines so big, before the are forced to have a 455 or Cat 935, or 939 size machine!! Thanks for the reply Clint, and keep up the GREAT work!!!
... if you can drive that tractor trailer on the Unionville ridge road.... you can drive anywhere ... first time l drove the 5 ton on it, l had my hands full ! ... thanks for taking care of DP . ...
Thank you so much for doing a Test run, on Rebuild. Even though it's not Yellow. It sure Looks Pretty, and clean to me. Excellent job on paint touch up. Can anyone tell me end usage for moving all that dirt. Just asking, would Love to see your Equipment yard. But I am in Northwestern part of US. I have a 78 Dynahoe-190 two wheel drive Over 8000 hours on her. I have added 100s sense I got her in 2003. The old Detroit 353 power. Just keep screaming along. Would Love you to REBUILD her for me. I have done just about all the cylinders seals for Hydraulic Leaks. You should have seen the 2 Front lift cylinder when I bought her. They flowed like a River. No brakes, and if you know about them they have that funny back wheel break Lock out ( brake fluid stops) for lock up for tight turns. I only lift with the front. If I'm working around someone. The Backhoe part drops like a Rock, if a Hose splits/ Ruptured. Had it happen to me. I just use her for my Garden. Dig the soil out. Put in Leaves, grass clippings, ect.ect. Then I mound it back flat. It looks like Big Muskie in my Yard, how small my Garden is.
DP liked it and i think he might want it, i know you took a bad rap from some, on one he bought, but i watch DP all the time and i think you did right on the one he got
Absolutely like these type videos, especially rebuilding older Equipment, especially the prices of new Iron. New Equipment has so much new technology that some are hard to work on unless you have doctors degree. Clint I would like to know your views on Dozer or track loader, Rippers or no ripper pro con.
31:24, DP is kind of like me. Once we shoot a video, it's at LEAST a month, or more before it's uploaded to the channel. Gotta keep a surplus stock of videos to upload for the slow times when we CAN'T film.
@@C_CEQUIPMENT Thanks, Clint. The reality is I could have some real equipment for the price some of that scale RC equipment costs! Although it ain't cheap, it's a ton of fun!
You did a great job on the rebuild. Shes a pushing Fool.I love those 850. I operate a 850 K LGP. 6 way blade..And there a beast...They would climb a tree if you could get it to Stick...LOL. I like how You guys run Your business. Hats off Too you and Your crew...Not too many businesses worry about anyone except themselves after a Sale...Its Refreshing to know its not EVERYONE..Now does John Deere give You guys Excess to there computer shit. Or do they make A Sales Business call them to do any programing. Its amazing how John Deere and CAT and some of the others make you have to call them for any programming stuff..Great Video.Thank You for how you Do business...Great Video....
@@C_CEQUIPMENT thats crazy they keep the stuff top secret. And you sell there equipment. I know its used or low hours. But you would think they would give it to you guys to Use ..Amazing. big businesses.Greedy ..Thank you getting back to me. Appreciate it
If you wanted to see if it could have been broken, you should have let Captain Kleeman use it, HA HA. I saw this on DP's channel, and it was nice to see it from your prospective.
The track on that 850J are to narrow for that type work, myself absolutely a sett of Rippers on that John Deeere 850J . If you notice that without Rippers that blade has to rolled back , because you cutting bits would grab and suck dozer blade down, with Rippers you can run blade more tilt forward , because Rippers balance rigg better, without Rippers your running the dozer more on the front idlers like track loader, but remember a loaders bucket is deeper so it Lays flattering on more surface and you can adjust the pitch. Of the loader bucket.
![[LIVE] : ONE ลุมพินี 86 | คู่เอก "คมเพชร vs ชาติพยัคฆ์"](http://i.ytimg.com/vi/m3q_dRYDuU8/mqdefault.jpg)
One nice and smooth running machine for sure.
Price of the machine sky rocketed when you sat in the seat. Lol
Is that your machine? Or it's twin brother?
For some reason I see DP buying this dozer
@@bobbywelch6035 yeah. Ive been thinking that too
Looks like u guys like wearing out undercarriage, dozers are for short push operation. Not quarter mile
Like it???? I was born on a grease zert and raised in a construction yard. Great content Clint keep up being real sir.
Love you guys you know you know your trade. Thank you all for the good videos you make for us😊
Whenever I watch your videos where you’re cruising along in the big blue beast, I can barely keep my eyes open. That rumble is like a lullaby and puts me right to sleep.
The sound the track system makes when rolling in 2nd speed in reverse needs to be my new soothing sounds to fall asleep to!
Guy like Clint from C-C EQUIPMENT don't come any better, he has excellent reputation, well liked and respected. Thanks Clint.
I like how you let DP check it out. That’s a good way to sell a piece of expensive equipment by letting it be tested out. Your reputation as an honest and reputable equipment company speaks volumes. If I lived closer I’d be proud to work for you. I like the channel
And now for a rebuild of the old 850would make everyone happy..Cheers from down under.
With the engine all fresh and turbo, it sure burns clean. Good to see Mike show you how to use this machine. He will make those tracks slip for sure.
Clint, we all love this content! Hope you continue to keep loading all these videos to TH-cam.
That's the plan!
Glad to see a couple of good ole "Hoosier boys" gitting 'er done from a fellow Hoosier from over east of Nashville.
Thanks
Love that you needed a place to put the dozer to work and helped out Mike in the process good deal for everyone
Love the sound of the straight pipes on that beautiful Pete. That’s a really nice dozer too y’all did a very good job rebuilding it. Letting a customer and equipment owner operator operate it for you to make sure everything works is a great thing to do I think for any thing someone puts work in to before they sell it. Really shows the quality of work y’all do and that yall want to make sure everything thing is good to go be for y’all put it up for sale means a lot. great job all the way around.
Awesome to see the relationship you and DP have going on.
Clint you’re a hell of a good guy.
Awesome video Clint, love the drive.
Thanks
Great Movie Thanks! Best wishes Clint & Co.
Thanks, you too!
It's awesome that you cameo with @DirtPerfect and @CaptainKleeman. You all seem to work well and bounce the slapstick comedy off each other. It's some of the best laughs I've had over the last couple years. Keep it up Clint and the A-Team!
Thanks
We try
So glad to see two TH-camr’s working together. Both channels will grow even bigger and better. I see a real working partnership in the making. 👊👊
Watching those two dozers side by side and seeing the pushing power of both is awesome. C&C did a super job on that 850J
Clint you are on class act, Love your videos and the detail you go thru each build. Everyone should take a page out of your book.
Thanks
I found your channel after watching DP test out the dozer. I like what I have seen so far. Keep up the great work and videos you make. Enjoyed watching you rebuild the engine and have been watching your videos on the M46 rebuild. Can't wait to see the next installment on that.
Thanks
That was really nice to see both 850's side by side. They both actually appeared to be working well. Also was a nice way to conduct business by letting Mr. DP try it out for a few day. More than likely it's sold to Mr. DP. And it's green . Great vid Mr. Clinton keep them coming
Thanks
Hi Clint
Good to see you and DP are on good terms after the hiccup.
Also great to see a crossover between TH-cam channels.
Thanks for sharing.
Michael (from Scotland)
Thanks
The person responsible for the "hiccup" is gone and the company has gone above and beyond in support since finding out about the issue. Time to let this go.
@@C_CEQUIPMENT Clint yalls company really does speak volume. I’ve always said what makes a good business is the support behind it. Keep up the great work
Thank you for sharing your video with us. It reminded me as kid going to work with my dad. Your going to miss it when you get old like me. Thank you again!!!
Nice a have a friend like Mike to let you take a peace of equipment to a job sight and test it out!!
both of you guys collaboration are fun to watch whether it is separate or both mixed up
Thanks
Clint, hats off to you for this video! It clearly shows the importance of Dealer and Contractor relationships as well as in this case, with a dozer, a quick look at the basics of how problems can be solved and overcome! It also shows great footage of your rebuild, testing not only by you (C&C) but Mike of Dirt Perfect. That creates a great selling point in my view and I would further trust the review of someone like Mike than a salesman from your big name dealer. You also showed great footage of Mike and Jerry's tandem pushing and that is a great learning example of operating techniques to maximize pushes! We also see the old school B model vs the newer J model and that can be a great selling point. Mike has done an excelling job alone with Jerry in showing the differences between the models. It also further builds trust, and integrity as a dealer to not only test out a machine on a customer's project, but you can help out a customer by leaving it with Mike, which he can better test it for you. Also, I would be interested in hearing Mike's opinion of this J compared to his unit!
I think it would be an advantage for both you as a dealer and your customers to do more videos like this. You can even make it educational to cover things to look for when buying equipment, repairs... Mike does an awesome job taking us along for his repairs! So many dealers are just using social media to sell their units... an overall of the unit, make, model, a quick look at the blade, the undercarriage, and a quick shot of operation that is 5 minutes or less. Screw that! That is a typical dealer and greedy salesmanship! I would be more apt to buy from you and this unit (if I had a need for a JD 850 J) than some others. One thing I cannot stand is watching these other dealers show a piece of equipment, hop on it. start it up and full throttle it! I'm sure you know the dealers I'm referring to here on TH-cam! I don't know any sensible operator that does that! I have seen some smaller Komatsu and older Cat (B & C models) I was interested in and then I see that??? They lost the sale right there and I don't care if they already had it warmed up and running for 8 hours! From what transpired I won't mention these other dealers.
So awesome job here and use opportunities like this to better your business and work with your customers. It's a win-win in my eyes! Someone like Mike with his following and I have been following him from the beginning, he can definitely help you sell machines. Just look at Truck and Track with the discount codes. LOL
Again hats of and hope to see more videos like this and with other customers! Major kudos! How you have handled everything Clint really shows you are setting the bar higher for other dealers. You have shown that when a problem or dispute happens, you as a dealer you are right there to listen, understand the problem, the customer's need, and provide solutions! That is true dealer support! Awesome job Clint and make DP give you a pat on the back!
Thanks for the awesome feedback
DP and I have more to come on both our channels so stay tuned
@@C_CEQUIPMENT Looking forward to it!
The shots from behind and between the dozers was cool.
Thanks
Yes, keep 'em coming -- great stuff seeing actual professionals testing the equipment out in a real world environment - great for them and great for you and C&C. How could it not be a Win-Win for everyone!
Love watching them push together!
Thanks Clint. Good job buddy.
Beautiful Machine.
Great job Clint, great to see the two John Deere working side by side and what an excellent outcome to the rebuild
Thanks
I'm getting hooked watching videos of 850J's. Amazing how quiet the cabs are.
It's neat that you left it for use at the site to rectify the _dam_ situation. I can't say that I ever recall an equipment dealer who would do that - Kudos!
Thanks
It’s not this first time I have done it
I found you through DP Mike saying you had a quality channel and danged if I haven't been watching even old videos of yours... a real treat. Your a mans man in my book Clint. I like the way you keep things light in the shop as there is way more than just showing up for work. A man wants to work where he has room to grow and to fit in with a crew. I am still trying to find the video of the logs being split like in your entro. Thats something I have been investigating even though I'm in my seventies, and never to have hands on any equipment... well one youngster wants me to teach him how to run his mill. I have built as many mills as there are different kinds... almost as I did discover a good many from overseas that show some merit. I kinda think Mike is doing with Matt what your doing with your son Hunter. No better way to get feet wet
Thanks
If you look under my playlists
There should be one titled Halverson
It will have some splitting videos in it
Here is a link
th-cam.com/play/PLbdveHlgP0_DE6wqbwxaoLgQqB5Me8wf5.html
@@C_CEQUIPMENT Thank you so very much, I probably skimmed too fast looking for a piece of equipment doing same
Very nice machine you rebuilt sir !And hell yes Clint , I absolutely love these heavy machinery , heavy hauling ……. What red blooded ,bacon eating American wouldn’t love watching this stuff ? ❤️😎
I like it pushes real good running smooth also
I got a kick out of this video. I watched Mike’s video earlier and then this one and it was cool seeing things from different angles. You got a new subscriber now.
Thanks
Hmmm, it appears I missed this vid at the time you first ran it.
Interesting to watch the two tractors working together, pushing a lot of dirt.
Knowing what DP ends up doing with the 850J is really funny.
that 850 B reminds of a 4020 Deere, just work and work and work
Interesting and impressive rebuild and excellent sounding and working finished product. This and the 2 part engine rebuild deffently shows you go all the way to do it right and no cornors were cut to save cost.
Thanks
As a Dirt Perfect Fan ... All I have to say is Great Job C&C Great Support and Way to go on testing your own products with your customers. May you and C&C Equipment continue to have success with all you future Endeavors. 👍👏
Thank you!
Love the sound of your truck. I have a 21 W900 X motor. It will never sound like yours. Jealous!
Great collaboration vidja!
Thanks Clint
Bought a nice Komatsu D20 P20A from you three years ago and it is a dandy. Glad I found your channel. Been a Dirt Perfect fan for years.
That is what i was looking for at the time.... A Komatsu D21 and a D21S track loader. Didn't see Clint have any in inventory at the time, what a shame! I would have bought from him instead! I wouldn't mind finding a Cat D3 B or C and a Cat 931 or a 933. I love old iron and the style of them. Perfect size for my small compact jaw crusher and 3 way screener.... crush and recycle asphalt and concrete. Also do composting and looking for a old Cat 910 wheel loader.
Hi! I really enjoy your videos ! I worked a D6C and D6D back in the 70s and 80s until my dad retired and I miss it! The sounds and the smells, well you know! Anyway, I’m old school and it’s fun to watch different ways because there is more than one way to skin a cat!! Keep it up!!
Thanks
Great seeing you guys working together!
The fact you handle business the way you do is awesome man , you could have went totally the other way but you didn't. And I'm now a subscriber and possibly a future customer ,we need more like ya
Thanks
Just watched 1st video Iam a big fan of Dirt Perfect it was great to see how you stepped up worked with Mike on 850j great service 👀 forward to your next Al from Nova Scotia Canada 🇨🇦
Thanks
Awesome 👏 awesome 👏 like to see y’all testing great 👍🏻
Got this sneaking feeling DP traded bought the other J for that one. It's always nice to see equipment run after you do work to it
Awesome , that my friend is a good business practice for sure whit your current customers.
Nice semi Clint really sharp
That sounded awesome !
That pond project has TH-camrs all over the place. This channel, Dirt Perfect and letsdig18.
One other comment, the way you stepped up and made the 850 J that Mike bought from you right, speaks volumes of the way you do business. That just doesn’t happen much any more. I would do business with you and I don’t do dirt work, now lifting equipment, different situation. Take care!
Thanks
Great video bro. I have seen DP's video of you dropping this off. Safe travels
That was a great video! Running a fresh diesel engine under load is the best for the break-in... love watching the big equipment working!
Yup great break in, pics poor uneconomical way to move dirt
Piss poor
Piss poor what???
What makes you the Authority? What are Dozers for!
Great video testing your work, looks like a dozer.
Ok, 5:00 A.M. here I set with eggs, bacon, toast, and coffee with a little hydraulic oil for the coffee and a little dirt for the seasoning on the eggs, grease for the toast and watching two great you tubers going at it. What a way to start the day. And then for desert we have Jerry on the 850 B Thanks guys. It’s going to be a great day I tell yah!!!👍😉😀
Looks like a very good dozer!
Love the video and this type of cross over and content is great. Nice job!
Nice video, Clint. I really enjoyed that. You now have a new subscriber over the pond in England.
Thanks
You guys rock especially after doing the right thing by Mike I subscribe to your channel🇺🇸‼️🤘🏼
nice video👍 looks as you got the right guys to test you machine
I enjoyed watching
very good video I enjoy these types of things please keep up the great work !
Fantastic video, love watching. glad I subscribed to your channel. Great stuff, Thank you....
Well thanks for watching
Enjoyed the video. Glad to see that you actually go and test out the equipment before you sell it. Bet it saves you in the long run for warranty claims. Next time you should drag out a 1050 to DP. Bet that would get his wheels turning 😂.
BEAUTIFUL Truck, tractor and trailer combo!!!! A guy can dream right?? I just need one of those real clean JD 455 track loaders with the clam shell bucket on it, that you had a few of the last several years.
Thanks
Yes getting hard to find those anymore
@@C_CEQUIPMENT Yes, that's what worries me. I do believe they will make a comeback though. They can only make the tracked skid steer machines so big, before the are forced to have a 455 or Cat 935, or 939 size machine!! Thanks for the reply Clint, and keep up the GREAT work!!!
I would recommend your company to anyone🇺🇸👍🏻‼️
... if you can drive that tractor trailer on the Unionville ridge road.... you can drive anywhere ... first time l drove the 5 ton on it, l had my hands full ! ... thanks for taking care of DP . ...
It’s narrow for sure!
I would buy from you anytime.." You obviously care about what you put out....A+++
Thanks
collaborating with Mike is a great idea, and should help you get subscribers.
For sure
Thanks
Nice!
I think he might even buy it from you...
Thank you so much for doing a Test run, on Rebuild. Even though it's not Yellow. It sure Looks Pretty, and clean to me. Excellent job on paint touch up. Can anyone tell me end usage for moving all that dirt. Just asking, would Love to see your Equipment yard. But I am in Northwestern part of US. I have a 78
Dynahoe-190 two wheel drive
Over 8000 hours on her. I have added 100s sense I got her in 2003.
The old Detroit 353 power. Just keep screaming along. Would Love you to REBUILD her for me. I have done just about all the cylinders seals for Hydraulic Leaks. You should have seen the 2 Front lift cylinder when I bought her. They flowed like a River. No brakes, and if you know about them they have that funny back wheel break Lock out ( brake fluid stops) for lock up for tight turns. I only lift with the front. If I'm working around someone. The Backhoe part drops like a Rock, if a Hose splits/ Ruptured. Had it happen to me. I just use her for my Garden. Dig the soil out. Put in Leaves, grass clippings, ect.ect.
Then I mound it back flat. It looks like
Big Muskie in my Yard, how small my Garden is.
Awesome video I enjoyed it it's not come across a good video TH-cam keep them coming and I'll watching them
Thanks
You wear many hats I see. Operator, rebuilder, heavy haul driver. Definitely know what you're doing. Nice having the scales on hand. DOT like those?
The 850j is a very good machine for push dirt especially in medium sized jobs 😎 smoother and efficient
DP liked it and i think he might want it, i know you took a bad rap from some, on one he bought, but i watch DP all the time and i think you did right on the one he got
Thanks
Absolutely like these type videos, especially rebuilding older Equipment, especially the prices of new Iron. New Equipment has so much new technology that some are hard to work on unless you have doctors degree. Clint I would like to know your views on Dozer or track loader, Rippers or no ripper pro con.
Hey Clint!! Just have DP sign the papers and you won't have to pick it up!!
Been waiting on this one! Looks like this was a State Job! Two watching one working!
Nice video, glad to see cross channel stuff. Hope you get good out of the loan and working with DP. Lets get you some more subscribers!!
Great stuff, Cliff. Keep bringing it!
Only better photo op would have been the trio of 850's coming up the hill
i do enjoy this kind of video to
Thanks
31:24, DP is kind of like me. Once we shoot a video, it's at LEAST a month, or more before it's uploaded to the channel. Gotta keep a surplus stock of videos to upload for the slow times when we CAN'T film.
For sure I do some of the same just not that far out
Cool channel
I love the Rc stuff
@@C_CEQUIPMENT Thanks, Clint. The reality is I could have some real equipment for the price some of that scale RC equipment costs! Although it ain't cheap, it's a ton of fun!
he likes his jake brake
Just subscribed. Good video.
Thanks
Clint, she needs a lot more stickers, hehehe
You did a great job on the rebuild. Shes a pushing Fool.I love those 850. I operate a 850 K LGP. 6 way blade..And there a beast...They would climb a tree if you could get it to Stick...LOL. I like how You guys run Your business. Hats off Too you and Your crew...Not too many businesses worry about anyone except themselves after a Sale...Its Refreshing to know its not EVERYONE..Now does John Deere give You guys Excess to there computer shit. Or do they make A Sales Business call them to do any programing. Its amazing how John Deere and CAT and some of the others make you have to call them for any programming stuff..Great Video.Thank You for how you Do business...Great Video....
We can’t do any programming unfortunately Deere hold onto that stuff
@@C_CEQUIPMENT thats crazy they keep the stuff top secret. And you sell there equipment. I know its used or low hours. But you would think they would give it to you guys to Use ..Amazing. big businesses.Greedy ..Thank you getting back to me. Appreciate it
You should check on the laws in your state on using the old style chain binders. Some states don't allow them on oversized loads..
Jerry only good dude on that crew
You set the hook. DP swallowed it deep.
Lol
If you wanted to see if it could have been broken, you should have let Captain Kleeman use it, HA HA. I saw this on DP's channel, and it was nice to see it from your prospective.
Thanks
I do enjoy your video’s
Thanks
That was a really cool video Brother!!!!!!
The track on that 850J are to narrow for that type work, myself absolutely a sett of Rippers on that John Deeere 850J . If you notice that without Rippers that blade has to rolled back , because you cutting bits would grab and suck dozer blade down, with Rippers you can run blade more tilt forward , because Rippers balance rigg better, without Rippers your running the dozer more on the front idlers like track loader, but remember a loaders bucket is deeper so it Lays flattering on more surface and you can adjust the pitch. Of the loader bucket.