Fish-inspired Wood Recycling Project // The Most Unique Idea For A Beautiful And Simple Table
ฝัง
- เผยแพร่เมื่อ 16 เม.ย. 2021
- A wood recycling project inspired by fish // The most unique idea for a table #WoodworkingGuide
★Thank for watching!
★Please like, share, and subscribe our Channel here:
Woodglut is full of amazing tips. It helped me a lot.
This table arrived well packaged and on time. th-cam.com/users/postUgkxn94T8Mu1iMnsLCMNOI9srXSsLkI4JXKW Like another reviewer advised, I pulled everything out and made sure everything was included (everything was!). I built it alone and it took me about an hour. The color is great and for the price the lift part works well. As others have mentioned, it’s not the smoothest opening/closing, but it works. The screws do show, but I plan to order white sticker covers if that bothers us too much. Really happy with this table! UPDATE: it’s been over a year since we got this coffee table and we still love it! It gets HEAVY use as our dining table, foot rest, and school desk. Over time, the opening and closing mechanism has gotten smoother. I added a new photo with the white screw cover stickers. They blend in perfectly and make it look a little cleaner. 100% recommend!!!
You have BOMB equipment dude!
So lucky to have a shop geared out like that
Nice job on that table. I work in a cabinet shop by the way and if I can offer a bit of helpful advice, near the bottom of those legs if you were to run a piece of wood across to join them together it would strengthen them quite a bit. With them as they are if they were to bear too much weight the strength of them could possibly be compromised. Because they are each only attached with three screws you stand the chance of that table collapsing. The top of the table incidentally is a great idea for a good size chopping block also. I don't know what kind of wood you used but if you were to use a hardwood such as oak it would make a great chopping block.
or wire, ormaybe some strong fishing line 🙂
Agreed
Cada uno hace la meza como quiera!!
I thought that in time the mitres would open up?
Certainly needs bracing across the bottom. Pine offcuts so cheap to make, well done.
MUY BUENA IMAGINACIÓN POR EXCELENCIA ..!!!!!...¡¡¡?¡FELICITACIONES !!!!
CÓRDOBA ARGENTINA.
При таком способе монтажа ножки стола долго не прослужат! Недоработано в этом плане, а так-идея неплохая!
First little bit of weight that gets put on there it collapses
Heaven help those legs if he has kids!
@@ChuckCoy ²1ssq+
If you notice, the sides of the blocks were drilled, so glue and urethane if that’s what the finish is, would find its way into the holes and act as if it were doweled. I assume.
Thats apoxy... Not collapsing at all
@@ChuckCoy i concurre
I like when they show most of these and most people don't have 10-20 grand of woodworking equipment around lol
Literally the most expansive thing they showed was the HVLP sprayer. The rest are diy level equipment such as drill and driver set, planer. The rest of the "fancy" equipment like mitre saw can be replaced with just a circular saw or simply a hand saw.
I always see these kind of comments on these kind of videos. Use the information as a guide and replace equipment with what you have.
I like when builders make videos for builders then other people who don't want to become a builder whine and complain that the video wasn't made for them.
I don't go to a video game channel then whine about not having hundreds of dollars invested into a console and gaming equipment.
Yea ppl forget that no expensive tools needed doesn't mean after they rip wood on tablesaw then run thru the planer...lol
Those corner clamps are dope.
Very very well done, but one thing for sure,,, I will never be able to go through the anxiety to do such an awesome thing, keep doing the great work
Класс ! Золотые руки ! 👍👍👍❤
Meu amigo você é um mestre...[ me deu inspiração nos meus 66 anos...😂 muito obrigado..
Thanks you
@@woodworkingguide6356..agora fiquei preocupado c/ a cola...não especifica qual tipo..mas eu tive uma ideia 💡..[ vou fazer uma resalto no quadrado ] ,, para sustento das peças e aí vai tudo bem e vai da certo..por o resalto vai da mas fixação nos quadrados colado....taks
I doubt I have ever seen anything more crude. Talk about joinery, nails, screws and glue. As for that beautiful finish, it certainly beats 'french polish'.
Me GUSTO...ahora ya😄q buena manera utilizarlo todo... Resultado Bello Único 😊🇨🇱Eres un Capó...Genio
Мастер на все руки 👍
Bella la mesita m encantó gracias 👏👏❤❤👍🇦🇷
it's beautiful and unique but i don't think it's that simple :) jmho. nice work and great idea. I think it needs a brace between the two legs, maybe a dowel.
Definitely needs some kind of stretcher. Won’t be able to put much weight on it before it collapses.
Oh how I love those corner clamps! 👍🏻👍🏻👍🏻🇺🇸
Молодец!!! Восхищаюсь!
Халтура!
@@Vadyan007 Соглашусь,..пособие как нельзя делать,...🤣🤣🤣
Молодец,у меня лично глаза отдыхают глядя как он работает,а руки чешутся чтобы подобное смастерить.
Complimenti, come sempre un bel lavoro, nella sua semplicita' e' sempre molto funzionale, dallo stile rustico.
столик хороший, есть вопрос по лакировке, на открытом воздухе рядом курочки крылышками - бяк-бяк-бяк ! Пыль наверняка прилипла.
It's good. If I may, I would suggest spreading the smaller cuts around the table vs one side. Other wise good job.
Was thinking the same thing
Muy linda gracias 🇨🇴🇨🇴🇨🇴👍👍👍👍👍
Столешница круто! 👍
А вот ножки можно и по другому чуть чуть замутить.
Я бы даже сксзал не можно, а нужно было делать по другому!
You are born with a natural gift!!
Love the designs of everything you do. The asmr helps me sleep 😴
Не вижу НИЧЕГО необычного , работа низкоквалифицированного столяра
Like his garden ad well, and his chicken pen , ,, Billy R Smith, Deer Park Texas. Have a bless day young man and keep up the good work.
Ficou muito bacana (nice)!!! Parabéns!!!
saludos desde México, Quedó muy bonita, exelente trabajo
Thanks for the inspiration! Will try this in ome of my upcoming projects.
SUPER KREATIF Sukses GBU
Muy buen trabajo 👍
Ну тут ещё учиться и учиться) Не дай Бог кому в голову прийдёт на этот стол залезть или тяжёлое что поставить
Да уж устойчивость такая себе))))
Ну да! Залазить на стол приходит в голову только нашему человеку
@@yuriy1808 залазить не надо, с двух сторон локти поставят ножки разъедутся, ножки между собой чикирить нужно!
@@user-dr8mg6cs6q ну вот тогда и свяжет когда разъедутся. Пока ещё стоят.
@@yuriy1808 когда разъедутся поздно будет, может уже,?свечку держишь???🤣🤣🤣
Thank you for sharing.
Salut je ne sais pas si tu connais le français mais c'est pour te dire que tu déchire grave mec grâce à toi je me meuble pour pas chère.Tu es un artiste.👌
Tuyệt lắm !bạn rất khéo tay
Мои восхищения и благодарность
БлагоДарю
Always enjoy watching your projects come alive....
Next time use butchers paper as a backer, or waxed paper, usually peels right off . If not easy to sand off.
Or, clear wrap or just plan brown paper. Newspaper? I guess any of these would suffice, however, the wax paper works good.
@@robertlangley258 I think the epoxy might soak through newspaper and you could end up glueing everything to the surface/table below.
I have seen the hard work and dedication uou jabe put on this table.For skills and demonstration of tools purposes I like it. For practicality,I prefer to buy a ready made one .Well done.
На столешнице саморезы замазал, а на ножках оставил.К тому-же с таким набором оборудования заморочился с эпоксидной, а потом залил лаком- фии
فكرة رائعة وانت أروع 👍👍👍👍🌹🌹🌹🌹🌹🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦
Like table like in children's room but bit bigger so can use it as engineering drawing table.
Это фиаско, братан.
😂😂😂👍это фиаско 99 lvl.
Maravilhoso trabalho.eu amei.🇧🇷🇧🇷🇧🇷👍👍👍🤗🤗🤗Parabéns.e Deus abençoe...
Complimenti. Che colla hai utilizzato
Great job, but I think the table legs will go with wear and tear with out a proper support holding it together in the middle.
Gracias felicitaciones y siempre adelante
Good morning from SE Louisiana 3 May 21.
He is painting his whole workplace and these feet probably will collapse. That's a pity because he was working hard to realize this nice project
Thank you!
Te admiro y te aplaudo y té respeto
Que fácil es todo cuando se tiene las herramientas necesarias
I like the table top but not a fan of the legs I would have gone coffee table, kids table or made it skinner and fine with entryway table but if course that's if I was selling it for profit I found this video because that's exactly what I had planned on doing with lots of leftovers that need to be used or perhaps tossed I can I my handle so many 2/4 and 2/3 chunks everywhere around here lol thinking if going with a coffee table maybe even a couple end tables but definitely helped give me a little push to see it thru thanks for the video 👍 looks great definitely love the top
Dios bendiga esa inteligencia tan linda y maraviyosa
Nice! (Muy Bonita!)
Great work! IMHO To take it to the next level I think you should avoid using screws or staples. I am not a carpenter but i see here a lot of impressive artisans who only build with carvings, wedges and glue
Parabéns ficou muito bom 👍👊👏🇧🇷💯
Parabéns, simples e muito bonito.
friend, how are you? Hope you and your family are happy and healthy every day!
Clear coating his chickens lol. Nice table
Qtal
This guy has the best workshop setup ever 👌all u hear is the tools and his chickens and easy clean up blow his wood dust right onto to small peace of lawn water it so it don't blow around and he's good
It always reminds me of monkeys and exotic birds instead of chicken 🦜🦧
Wow!!! He sure works fast!!!!😃😃😃😃
Im really into industrial and rustic furniture. I think that table looks awesome outside the legs i like it. Good work mate.
To the person reading this comment, yes you.
I wish you the most success, health, love and happiness. Stay Relax, HD.
Belo projeto,,, parabéns professor,,,
Отличная работа 👍👍👍👍👍👍👍 я вот недавно из обрезков сделал табуретки
Наглядное пособие как нельзя делать...этот стол одноразовый...🤣🤣🤣
Very nice like your idea very nice good good afternoon
Bravo, amigo !!!
Excelente , great job.
Congratulations
Muy bueno. Me encanto
He should have flipped the table over, sprayed the underneath & the tabletop after. Impressive work & design.
Отличная идея!!!
Thank you for the video.
Молодец!
If you smear a thin layer of Vaseline type etroleum on that white board you used for glueing up the table top. It will seperate very easily. Nice job as usual.
Ma cosa spruzzi sopra i tuoi progetti bellissimi..👏👏👏👏
Muy buen trabajo
you did not even align the frame properly .Come on 6M views?
6 million views but only 31k likes. Something doesn't seem right
Lovely work. You are really skilled. Thanks for showing us.
Я по профессии мастер столярного и мебельного производства, всю жизнь занимаюсь деревообработкой, делаю дорогую мебель, лестницы, двери! Смотрю на всё это бракоделие, просто в ауте. Зачем я этому учился, зачем я постигал все технологии, тонкости изготовления мебельных щитов, когда можно лепить г.вно и глупые люди всю эту порашу хавают!!!! Данное детище, изготовлено с нарушением всех технологий и более 6 месяцев оно не простоит!!! Все склейки разойдутся, потрескаются, столешницу обязательно всю выгнет! В общем детище! Изделием это назвать, язык не поворачивается!!!
Muito bom trabalho parabéns pra vc e sua equipe 🇧🇷🇧🇷🇧🇷🇧🇷
friend, how are you? Hope you and your family are happy and healthy every day!
Очень полезное видео. Теперь я знаю как нельзя делать столы...
Thank you very much
Вы тоже заметили ошибку с ножками?..🤣🤣🤣
Не дай бог облокотиться на него
Eres un joven muy inteligente
Una pregunta q tipo de pega mentó esta utilizando me interesa
Nice one mate 👍 simple but great looking project, very very nice
Belíssima mesa.
Really beautiful...... Fantastic.... I like your job... 👍👍👍👍👍👍👍👍👌👌👌👌👌👌
Здравствуйте, чем смазывали обрести досок?
Fabuloso
Sem comentários, é arte pura.☆☆☆☆☆
C’est magnifique
I am Japanese. You did a good job.
What stops the expanding tabletop from expanding and breaking the miters apart?
My thoughts as well.
Same.?.?
Maybe not for heavy uses or but weigh on it
Very nice! You have a lot of cool ideas. Once i get a workshop i will be busy!
O trabalho de marcenaria nunca foi considerado uma arte más nós marceneiros sabemos que nosso trabalho é uma arte na madeira 🇧🇷
Com certeza! Ronaldo sabe me dizer o que ele usou naquela colagem do Tampo da mesa? Aquela mistura que ele fez?
@@alanmoreira8283 existem vários tipos de colas uma sugestão pra vc use cola expansiva para madeira vc vai gostar
@@canalinteriorderondonia muito obrigado! Estou querendo fazer uma mesa para escritório com ripas de 9,5 X 150 X 2cm
@@canalinteriorderondonia estou usando a cola que falou, muito boaaa valew pela dica
@@alanmoreira8283 bom trabalho pra vc 🤗
Что за клей для столешницы?
Undoubtedly, the master craftsman created a unique masterpiece using scrap wood. Marvelous. Thanks
Ficou linda,mas podia ter mostrado mais de perto...👏👏👏👏👏👏👏👏👏❤❤❤❤
Ближе нельзя. Все косяки (ошибки) будут хорошо видны