@@outinthewood3578 A little Dave, but it is a place called the Rufino Tamayo Museum of Contemporary Art is a gallery similar to the Museum of Modern Art in New York, is in Mexico City.
@@outinthewood3578 My first day working in the woods an old timer said that to me. "Go at it like you're killing snakes". It served me well for over 30 years.
Lovely to see you using the 365 a real old workhorse of a saw.Try out the 555 and you will be surprised with it.much the same saw as the 560 without the stuffers in the crankcase and a few other bits and pieces. 15 inch bar on hardwood thinning and an 18 inch on larger softwood, she's a little beauty. Enjoy you're videos there a joy to watch.🌲🌲🌲
Doesn't look to old to me, its the xtorq, may even have the transfers ground the way its running. I like the 555 a lot myself, ran a 64dl setup on the last one I had. Wish we got the 560 here in the states, at least we got the 2260, I got one 😃. I should do a video of it cutting some cookies this week and compare it to the ported 357 I just sold.
How's she cutting buddy, i just subscribed to your channel and that is a sweet 2171 you got there.I have a 560xp a 562xp but I much prefer the 562xp for a number of reasons but the 572xp I got lately is a superb machine and with a 24 inch guidebar on big spruce it's a dream to run.🌲🌲🌲🌲
Hello you two ! Brett is on the money , it's a XT with a baffles ground away with the muffler sorted out and today re set on the high jet as I said in the description it was a little rich.
@@outinthewood3578 nice. The XT's are strong saws and get great fuel economy. I'm sure you are running 40:1 or better already, but it's more crucial on the 372xt because they have plastic bearing cages. Enjoy your new saw.
@outinthewood have been looking at purchasing a 365 xtorc for myself but was hoping you could provide some insight into it for me. First off is it quite a heavy saw to use for the whole day secondly is it quite capable with larger bars such as 24 to 28" and lastly are there any upgrades you would reccomend for speed/power or just leave it stock?
There is a few I don't have ! Cleaning out these Spruce is our day to day so you get used to it, at the tender age of 58 I just get on with it, if I thought about I might want to sit down !!
Hi Kyle, no the 461 was a one way trip and has gone to a new owner, I have a pretty special 357 due in and of course jack has to do my 500i so plenty to look forward to !
Hey Dave -- a 365 Special I just did complete rebuild had bad crank needle bearing. Used 371 crank and all new parts. Dual port bull horn muffler and base gasket delete. Has the Walbro HD12 carb that feeds her real nice. Closed port. 20" bar. Love this saw! th-cam.com/video/sCfrl7Qjux0/w-d-xo.html
This guy is relentless, like the Terminator.
What a great saw, I love mine
I really liked that saw and very well Dave. 👍🏻🌲
Thanks Brandon, was that an art gallery you were visiting on Sun ? I have to look again !
@@outinthewood3578 A little Dave, but it is a place called the Rufino Tamayo Museum of Contemporary Art is a gallery similar to the Museum of Modern Art in New York, is in Mexico City.
Going at it like you're killing snakes. Good hustle.
Lol !
@@outinthewood3578 My first day working in the woods an old timer said that to me. "Go at it like you're killing snakes". It served me well for over 30 years.
Moving right along👍 excellent limbing 🌲
Thanks Coleman.
Lovely to see you using the 365 a real old workhorse of a saw.Try out the 555 and you will be surprised with it.much the same saw as the 560 without the stuffers in the crankcase and a few other bits and pieces. 15 inch bar on hardwood thinning and an 18 inch on larger softwood, she's a little beauty. Enjoy you're videos there a joy to watch.🌲🌲🌲
Doesn't look to old to me, its the xtorq, may even have the transfers ground the way its running.
I like the 555 a lot myself, ran a 64dl setup on the last one I had. Wish we got the 560 here in the states, at least we got the 2260, I got one 😃. I should do a video of it cutting some cookies this week and compare it to the ported 357 I just sold.
How's she cutting buddy, i just subscribed to your channel and that is a sweet 2171 you got there.I have a 560xp a 562xp but I much prefer the 562xp for a number of reasons but the 572xp I got lately is a superb machine and with a 24 inch guidebar on big spruce it's a dream to run.🌲🌲🌲🌲
Hello you two ! Brett is on the money , it's a XT with a baffles ground away with the muffler sorted out and today re set on the high jet as I said in the description it was a little rich.
@@outinthewood3578 nice. The XT's are strong saws and get great fuel economy. I'm sure you are running 40:1 or better already, but it's more crucial on the 372xt because they have plastic bearing cages.
Enjoy your new saw.
Hi Fergus, I told you you would like the 572, it's a really good saw
Sounds good great week 👍
Great video man y have to 365 xtorq, greetings from Romania.
👌👍
Thank you .
What's the issue if it pulls some fibre ? Prev vid
👍🤝🙂
Really like the new belt and organisation of Suzuki !!
@@outinthewood3578 Thanks you very much 👍🤝🙂
Austria forst likes that axe..👍
Love your vids
Thanks Paul !
@@outinthewood3578 140 psi good compresion 372 xp oe?
Nice.😆 Cheers.👍
@outinthewood have been looking at purchasing a 365 xtorc for myself but was hoping you could provide some insight into it for me. First off is it quite a heavy saw to use for the whole day secondly is it quite capable with larger bars such as 24 to 28" and lastly are there any upgrades you would reccomend for speed/power or just leave it stock?
Now thats working like a boss . you weren't even out of breath . i like the helmet cam.
BTW is there a husqvarna model you DON'T have lol.
There is a few I don't have ! Cleaning out these Spruce is our day to day so you get used to it, at the tender age of 58 I just get on with it, if I thought about I might want to sit down !!
Nice clean 365 Dave. Have you gotten the 461 back from the West Coast?
Hi Kyle, no the 461 was a one way trip and has gone to a new owner, I have a pretty special 357 due in and of course jack has to do my 500i so plenty to look forward to !
outinthewood i see, i was hoping it was the other way around with the 500...what do you plan to run on the 357? 20? 24?
Evening Kyle, 24" and 28" on the 357 and the 500 should be a more "gutsy" saw when it returns !
@@outinthewood3578 Nice Dave! Will be interesting to see how it matches up against a ported 562.
How old is this saw?
It is a 2018 saw which was run lean so now new piston and cylinder with a few hours on it.
365 sounds good with them limbs and the mossy tree also
It's doing better today after a re-set on the high jet. Nice limbs to cut but you have just the same on some of your Pine !
Hey Dave -- a 365 Special I just did complete rebuild had bad crank needle bearing. Used 371 crank and all new parts. Dual port bull horn muffler and base gasket delete. Has the Walbro HD12 carb that feeds her real nice. Closed port. 20" bar. Love this saw! th-cam.com/video/sCfrl7Qjux0/w-d-xo.html
Hi Malk, I'll have a look later been a long day ! The 365s are a overlooked saw often and gives a good platform to get a good result from .
Nejhorší pila od nejhorší značky