ฝัง
- เผยแพร่เมื่อ 4 มิ.ย. 2024
- This is a in-depth review of the Sunlu T3 3D printer. We will take a look at what comes in the box, open up the printer and check the components used and evaluate the printer features.
-----------------
Equipment links (affiliate):
⭐ Sunlu T3 Printer:
Sunlu:
www.sunlu.com/products/termin...
Aliexpress:
s.click.aliexpress.com/e/_DER...
-----------------
⭐ Sunlu PLA Fillament:
www.sunlu.com/products/pla-pl...
-----------------
☕If you would like to support this channel and this type of content, you can do so at the following link:
ko-fi.com/yogitech
--------------------
00:00 Introduction
00:54 Unboxing
01:29 Assembly
02:20 Hardware features
06:38 Tuning and setup
09:21 First Prints
11:14 Firmware update
12:51 Power cut recovery
13:14 Filament run out test
13:56 Final Thoughts - วิทยาศาสตร์และเทคโนโลยี
Bravo ! Super review ai facut ! Am aflat tot ce e de stiut despre acest model.👏👍
Thank you for this review! Just ordered mine today! So excited. I already own the s8 pro and love it!
How do you like it?
100th like here! I chuckled when you pointed out the mobo fan. Amazing.
Maybe use a Capricorn Tube in replacement of the original PTFE tube, less VOC & can support higher temperature
Hi Is it possible to make a video showing how to update Marlin in the T3. The Sunlu update contains Marlin and some other files.
I need help so for my birthday I’m getting a 3d printer it will be my first one and I got this one in mind should I get the sunlu t3?
Hey what size are the belts?
thank
This is my first 3d printer can you give me tips
love my ender 3. simple as
i have an ender 3v2 and a bambu lab p1p but i saw these for 43% off so i decided to get one and add it to my collection ill try it out for a while and let you know how it stacks up compared to the ender
and how was it?
@@omegadeepblue1407I completely forgot to come back here. For the price I got it for £120 it’s very good. It was easy to set up and had consistently printed well I did buy a new print bed as I prefer pei plates. But compared to an ender it’s a lot easier to set up and get printing all you have to do is set up the gantry and then set the z offset and it’s ready. The fast mode on it isn’t very good as the part cooling isn’t good enough to have cooled the previous layer before the next one is being printed e.g. on the benchy tower it ends up leaning because the part cooling is on one side. I turn fast mode off and run it at 100mm/s and it prints well just not really the 150 advertised maybe with better part cooling fast mode could work but I haven’t modded anything on it yet
Come on, let us know!
Мы всё ещё ждём 😂
possibly the printer I would least recommend in 2023
Is it really that bad?
@@charlesyoung8600 it’s not bad but it is no different then an ender 3 And at the price there are just way better printers like the Elegoo
I partly agree. I've had this T3 for approx. 1 month and like it... but ... the reviewer did a good job explaining the pitfalls. Tighten all the nuts and screws... align and level properly. Experiment with calibration prints and upgrade the PTFE tube. Mine makes a clicking noise when the bed slings around and thank you for pointing out the belt rub issue. The price of an Ender 3 pro is almost same price. I'm a newbie and retired, and so I have invested the past month in this printer and now understand a bit more how to run it. For someone who just wants to print-and-go, this video will help, but i would probably not make this my first purchase, eventhough it's inexpensive. I still like it (bought some ender spare parts on Amazon) but looking back, I should have bought an original ender or looked at a direct extruder model. There's always next year :)
Wym this printer is now $120 I say its a still and has way better features then others that cost more, like a auto leveler, metal extruder and feed sensors. I was going to get the Voxlab X2 but I think this is actually built better.
@@jacobmurray3621 on méxico an elegoo cost $6,500 mexican pesos, the sunlu t3 costs $3000 mexican pesos
I bought one of these and i have to say its a waste . your guide is good but even after all the leveling offsets etc etc i have not been able to print a single thing with this printer . it either wont stick or sticks first layer then screws up the rest . etc etc followed many videos and instreuction's just aint worth it , my any cuibic worked way better
An expensive paperweight!
This is what you will get if you buy a product from Sunlu, good luck trying to buy a spare part