How to built Dirt Shaker Topsoil Screener

[@SENWiEco]

Great workmanship and design! Yours is fancy. I just cobbled one together and started torturing it. Agree with others, you need a steeper angle and more vibration. The springs, while smart looking, are way too stiff. Try to find a taller set that has a lot more flex. Also, you will get more vibration if you downsize the pulley on the main shaft, you almost want to reverse what you have. You want the counterweight assembly to spin as fast as is safe. It should spin fast enough where you can not make out the spinning shape, it just looks like a solid surface. This will all pretty much eliminate your need to 'tend' the shaker deck. My DIY shaker deck is at an angle of 35 degrees, and I find it self clears all but the wettest and heaviest buckets full. The fact that you have your screens in the 'long' orientation (I have the same) means there is plenty of opportunity for the dirt to fall through. At the steeper angle, you still will not get much dirt flowthrough (but it does remove a lot more of the small gravels that otherwise would fit through the mesh).

[@PJ-ee5mc]

Great looking machine and very well constructed but... you need a slightly steeper angle (25-30 degrees) and you definately need to put far less dirt on it at a time otherwise you bog down the vibration effect. Feed it more slowly and it will actually work more quickly. I spend hours each week using a machine that I built that I operate totally alone and use my little excavator to feed it. I use 1/2 inch spacing on my wire grid and it makes beautifully screened soil. I keep a little stiff bristle push broom up on my excavator with an 8 ft handle for easier reach just in case piece of old sod or a stick gets hung up and slows things down. I seldom have to actually get off my machine. The angle and rate of feed is everything but I'm sure you already figured that out if you built this back in 2018. Keep up the great work!

[@KZtheFisherOutdoors]

Thanks buddy for watching and commenting also advice 😉👍 this was a first attempt I did adjustable legs in the front so if I get moist soil I'm adjusting the angle also I did add a re-bars on top of the screen on the angle that works great
Happy screening 😉👍

[@MichiganGreatOutdoors]

This is really cool!
I need one of these for a smaller scale project!!! Something I can just feed with a shovel.

[@KZtheFisherOutdoors]

Thanks for watching and commenting buddy 💥👊😉

[@danj285]

nice work,
i'd say you would need longer springs, anything from a small car would work well .
the current springs are short and seem to have a heavy spring rate, your looking for soft spring rate so factory small car spring rate should be 2-3kg.
if you cut factory springs shorter you'll increase the spring rate which you dont want.
good luck, hope this helps

[@KZtheFisherOutdoors]

Thanks for watching and commenting

[@TheFalconJetDriver]

I was thinking the same you have too much dampening with those short springs good soldid design over all!

[@bryanmaudlin9605]

If you used a more solid shaft and slightly larger counterweight, that thing would scream! I like it a lot though. Great work.

[@KZtheFisherOutdoors]

Thanks for watching and commenting!

[@Banjo63]

Great job! Love your design!! Question: I’m in the process of building a screener and have springs very similar in length & diameter to yours. What are the metal cups you used on the top & bottom of your springs & where did you find them? I’ve searched high and low for something similar with no luck!

[@CUONGDELL]

Your new friend came and watched your video very well and meaningful. Your footage is impressive and leaves the beauty in the life that you create it. Please keep these beautiful moments. Please share and encourage each other dear friend. I am waiting for your new videos.

[@KZtheFisherOutdoors]

Thanks for stopping by 😉👍

Nossa que invenção bacana essa meu amigo, gostei de ver como ela faz com a terra, muito prática 😊

[@KZtheFisherOutdoors]

Thanks for watching

[@averageanglers7075]

Nice! Wish we could use these in Cali for mining

[@KZtheFisherOutdoors]

Thanks for watching and commenting buddy 😉👍

[@Bobcagon]

You can make it pay for itself with hobby gardeners wanting their gardens rock free. I know I’d hire you because it would pay me dividends just to have no rocks for vegetables growing.

[@KZtheFisherOutdoors]

Thanks for watching and probably one day I will do that 😉👍

[@VARIADAPESCA]

👏👏👏 195 👍 Muy bueno gracias por compartir

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@happyfishing735]

good job awesome design 👍💯keep fighting bro 👍💯💯💯

[@KZtheFisherOutdoors]

Thanks for watching and commenting 😉👍

[@amanecerdepesca3088]

Felicidades mi amigo buen video. Fuerte abrazo... Juan 🇦🇷

[@KZtheFisherOutdoors]

Thanks for watching

[@bujangpalala10]

Nice video... Good job ..my friend

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@carlospescaeciape]

Obrigado amigo pela força fica com Deus já mim escrevi no seu canal 👍👍💪🐟 abraço do Brasil

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@carlospescaeciape]

@@KZtheFisherOutdoors 👏👏👏🙏🙏👍👍

[@AMIGAOFISHING]

que trabalho incrivel...voce é um engenheiro

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@BielnaPesca]

Like 172, congrats my Friend ♥️🎣💪👏👏👏👏👏👏

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@pesca085]

Otimo trabalho meu amigo,ficou realmente incrivel!

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@dannys4e617]

Nice video, your pretty smart! I seen your comment on JUN T'S OUTDOORS and decided to check you out. Im subbed to you now. I do alot of fishing myself, any support would be greatly appreciated

[@KZtheFisherOutdoors]

Thanks for watching and commenting buddy 😉🤙🎣

[@berburumeramu8068]

Like good joob

[@KZtheFisherOutdoors]

Thanks for stopping by 😉👍

[@fabianopereira5082]

Ótimo trabalho like garantindo

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@terobosalas2431]

ist good vidios friend,my like you😍😍

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@Grepainter]

Wow nice share friend

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@mancingmancingan1]

Good video new friend.
Grettings from indonesia.

[@KZtheFisherOutdoors]

Thanks for watching 👍😉

[@jasphebvlogs5780]

its a hard work you are doing a great job my friend

[@KZtheFisherOutdoors]

Thanks for stopping by 😉👍

[@freddepauw]

Very nice. Well done

[@KZtheFisherOutdoors]

Thanks for watching

[@HighEndTroutFishing]

Thank you for the great video and tips 😀 definitely i will give you my full support with subscription 😀

[@KZtheFisherOutdoors]

Thanks for watching and commenting buddy 😉👍

[@yusufulum3625]

Good gond my friend.. tq..

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@abinklure]

wow amazing👍👍

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@MinimalistOutdoors]

Too cool, very ingenious. This your own invention?

[@KZtheFisherOutdoors]

Thanks for watching and commenting 👍
Yes it is my 6 months invention works like a charm

[@MinimalistOutdoors]

@@KZtheFisherOutdoors wow that's amazing. I like your videos!

[@CikguHaslyna]

Nice sharing

[@KZtheFisherOutdoors]

Thanks for stopping by 😉👍

[@Herman_Uswah]

Mantap kawanku ...
Salam dari Indonesia. .

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@Herman_Uswah]

@@KZtheFisherOutdoors your are well come 👍

[@fabioalvesfishing]

Sensacional show de bola parabéns

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@coastlineoutdoors]

Pretty cool!!!

[@KZtheFisherOutdoors]

Thanks for watching and commenting 😉👍

[@rickystv5089]

Nice job bro,good work....goodluck

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@traveling2211]

Good my friend

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@PescaRealARG]

Good my Friends ❤🇦🇷

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@DKPRODUCTION67]

Lke👍👍👍👍💜

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@KevinAlvino]

Oh nice 👍🏻

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@lior_ben_shitrit]

great channle my friend, i am sub.

[@KZtheFisherOutdoors]

Thanks for stopping by 😉👍

[@latifpkychannel2043]

Nice

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@ernestjantv]

new friend here see u in my home

[@KZtheFisherOutdoors]

Thanks for stopping by 😉👍

[@girl_piker5625]

New subscriber 😄👊🏻

[@KZtheFisherOutdoors]

Thanks for watching 😉🤙

[@stoneyislandranch9783]

Now you have to unbury the thing

[@KZtheFisherOutdoors]

Thanks for watching and commenting 😉👊

[@guiihpesca8939]

Show meu amigo 👏🏻👏🏻👏🏻👍🏻

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@aidenbailey4024]

How much did it cost for you to build this?

[@KZtheFisherOutdoors]

Thanks for watching 👍I would say around 2k

[@FishfearmeStudios]

I wonder if would work as a gold sifter

[@KZtheFisherOutdoors]

Thanks for watching and commenting buddy probably will work with some modifications 😉🤙

[@naganstrek7778]

Like vidio... 👍👍👍

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@TeamSahabatMancing]

Nice vid👍

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@juflettirana]

Great vlog, I like it. Keep it up, and don't forget to subscribe for more views

[@KZtheFisherOutdoors]

Thanks for watching and commenting 😉🤙🎣

[@AndresTBS]

👍👍🙏🤝

[@KZtheFisherOutdoors]

Thanks for watching 😉🤙

[@julianriverarodrguez5461]

What kind of springs and spring mounts did you use? I am building a screener of my own and don’t know how to deal with the spring and its mounts?

[@KZtheFisherOutdoors]

I got them from the job they use them for big AC units as a antivibration

[@bangarifin1617]

Like vidio mantap👍

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@ahmodchoudhury4603]

Hi,
This AK Choudhury from Assam silchar, I need this machine, how can I get the contact details, plz let me know

[@mafatihajja7166]

Like👍👉🏠☕

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@JuariChanel]

dasyat 👏👍

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@Рыбалканаозёрах-ы8б]

Классное видео это типа драга золото искать это круто я на Дискавери видел Заходите в гости буду рад знакомству 👏👏👏👍👍👍😄

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@alwaystogether9144]

Nice video . 👍

[@KZtheFisherOutdoors]

Thanks for watching 😉🤙

[@mancingngawur7726]

Like ,162 🙏🙏

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@spcofficial9190]

Like 💓💓💓💓👍👍👍👍

[@KZtheFisherOutdoors]

Thanks for watching 👍

[@NAMPescaenKayak]

EXCELENT!!!!

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@PescaRealARG]

Like 143

[@KZtheFisherOutdoors]

Thanks for the visit

[@sahabat_ajooos]

Semangat 👍👍💪💪💪

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@tonicoaquieali]

my friends , like

[@KZtheFisherOutdoors]

Thanks for watching 😉🤙

[@fishingmediterraneo1417]

thank you . with pleasure I reciprocate and subscribe to yours

[@KZtheFisherOutdoors]

Thanks for watching and support 😉🤙

[@hijaudauntv654]

👍👍👍❤️🇮🇩

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@AlexandreMONTESPESCADOR]

top pescador

[@KZtheFisherOutdoors]

Thanks for watching 😉👍

[@wiserswhiskies]

What are the springs from?

[@KZtheFisherOutdoors]

Big office computer towers anti shock

[@wiserswhiskies]

Kzthefisher Outdoors thx for the quick reply, nice machine, lol I don’t have access to that type of spring but I think that machine awesome

[@wiserswhiskies]

How much counterweight are you using, trying to figure out the best way to go lol thx

[@KZtheFisherOutdoors]

@@wiserswhiskies what I did in other end of shaft I put ¼ steel plate off the center and welded 1"/½ peace this create shaking, speed of engine control more or less

[@KZtheFisherOutdoors]

Start with small piece steel welded always you can put more as needed