Coffee Table Build with the Festool Domino XL 700 - FREE Dimensions included

In this video, I'll show you how I built this DIY coffee table using the Festool Domino DF700 XL! This coffee table build was a quick build for me to learn how to use the Festool Domino and all its features!
*Tools used in this video* (amazon affiliate)
Festool Domino XL DF700: amzn.to/3DdZs1E
Festool Domino 8/10 Domino Set: amzn.to/3qHSZaq
Festool track saw: amzn.to/3jKTcVC
Festool Rotex 150 FEQ Sander: amzn.to/3m67HVf
Festool Router: amzn.to/31JJpXI
Grrripper Push Block: amzn.to/3dNxeQL
Dewalt drills: amzn.to/2O1O6ZI
Dewalt miter saw: amzn.to/3y6Tn2Q
Dewalt router: amzn.to/3r6eZcI
Rockler Router Table lift: amzn.to/3cMbxj6
Z clip fasteners: amzn.to/3iTyFOa
Freud 9/16” slot cutter router bit: amzn.to/3sRxWRa
SawStop 3HP PCS: amzn.to/3kk7Pk1
Grizzly G0855 Jointer: amzn.to/338AkeY
Speed square: amzn.to/3oJryJj
Jorgensen clamps: amzn.to/3j3FEnO
Irwin 48” clamps: amzn.to/2Yodiem
SKIL 30 piece router bit set: amzn.to/3sPIKiK
GoPro Hero 8 Black: amzn.to/3idfFvh
Materials:
2x6x8 (x10)
8mm dominos (40mm and 80mm)
Wood glue
Z-clips
Cut list: (every approx ~1.25ish" thick)
** Don't precut everything, cut it as you build - measurements may slightly differ **
Top: 47.75" x 5" (x5)
Legs: 17" x 5" x 3" (x4)
Short apron: 17.75" x 4.5" (x4)
Long apron: 36" x 2.25" (x4)
Stats: 18 3/8" x 2 3/8" (x12)
This was filmed with a GoPro Hero 8 Black and edited in iMovie. Thanks for watching! Be sure to subscribe and check out some of my other videos! Find me on Instagram (MMCC_Woodshop) for more of my work!
*DISCLAIMER* The following content is for entertainment purposes only. Woodworking and using power tools can be extremely dangerous if not done properly. YOU (the viewer) are fully responsible for understanding proper use of tools, as well as the safety features of each. I highly suggest reading the owners manual and/or watching how-to videos on the tools. I (MMCC_Woodshop) am not responsible nor liable for any injury, death, or handing of the tools you may use, nor do I assume to display the proper handing of as a demonstration. Please use extreme caution when working with any power tools. - Matt
Want to support my channel? Feel free to buy me a coffee!www.buymeacoff...

[@fit-with-eaz2627]

Smart..as always. Thank you.

[@mmcc_woodshop6288]

Thank you!!

[@emericpopovici3405]

Nice job !!! Well done!!! 👏👏👏🙏