Fast Marshal, Thunderstorm and Drift | Touristenfahrten Nordschleife | BMW E46 325ti
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- My season start at the Touristenfahrten on the Nurburgring Nordschleife at easter 2024 turned out to be a little bit different than expected. Watch me chasing a fast track marshal and my first drift trials at the Nordschleife in my BMW E46 325ti Compact. The Michelin Pilot Sport Cup 2 tires were way more grippy in the wet than expected and next time I have to work on the transitions. ;)
#nordschleife #nurburgring #325ti #Touristenfahrten #drift
0:00 Intro
0:22 Fast Track Marshal
1:35 Thunderstorm and 1. Wet Lap
3:36 2. Wet Lap
6:44 Outro
Car stock except:
Michelin Pilot Sport Cup 2 in 225/45R17 front and rear @ 2,3 bar
ATE Power Disc brake discs with Hawk HT-10 brake pads front
ATE Power Disc brake discs with standard ATE brake pads rear
Steel braided brake lines
ATE Typ 200 brake fluid
Wiechers aluminium strut bars front and rear
Removed spare tire, rear wiper, rear seating surface/backrest and parcel shelf
Recaro Pole Position ABE bucket seat on Animal Racing console at driver's side
Schroth Profi II-FE 4-point-harness at driver's side
Bastuck muffler
ST XTA suspension with standard springs and damper settings
DIY wheel alignment with stock values except increased camber front (~ -2°)
Limited Slip 45% 2-Way LSD
M3 rear axle bushings with PU subframe bushings
Fiberglass hood and front fenders
Beltenick racing battery
Thanks to @statesidesupercars for the spectator footage! - ยานยนต์และพาหนะ
Cooles Video wie immer :D Frage: Was hast du für Längslenkerlager drin?
Vielen Dank! Ich hab E46 M3 Längskenkerlager drin, aber aktuell würde ich wohl auf die Uniballlager für den Toyota Camry K200786 gehen
@@quirky_but_quick Ok, ich habe ich noch nie gehört, dass man welche von toyota nehnen kann. Ich dachte an MK motorsport oder milway aber ich gerne was mit regenschutz
@@dent_drifter Die vom Camry haben eine Gummimanschette und sind von MOOG. Die kann man z.B. per Amazon in den USA bestellen und kosten ca. 40€ pro Stück. Man muss sich nur was einfallen lassen mit der Bohrung, da die für M14 und nicht M12 sind. Das sollte sich aber per passender Hülse lösen lassen soweit ich weiß
Die vom M3 fahren sich aber auch nicht schlecht und passen auf jeden Fall :)
@@quirky_but_quick Ich denke ich versuche es mal mit Milway oder MK und teste wie viele Jahre die mitmachen und bis dahin gibt es vielleicht ne bessere Lösung. Ich habe übrigens PU 80sha drin und es ist richtig mies aufm Track. Sehr lose Hinterachse vom Gefühl in Extremsituationen.
@@dent_drifter Dann bin ich auf jeden Fall auf deine Erfahrungen mit den Milway oder MK Lagern gespannt! PU war ja mal sehr beliebt, aber dein Bericht bestätigt meine Zweifel und die sollen die Längslenkeraufnahmen ja auch recht stark belasten auf Dauer
Sat artik su arabayi cok cirkin very uygly
Sensin çirkin