14:25 atp you should give a tutorial of the atem mini pro with the accsoon etc.. b/c i just use a external monitor to view w/o the accsoon. Not sure exactly what the accsoon is doing in this set up b/c i do the same thing ..i just don’t have the accsoon
@@YourFilmmaker ummm I do the same w/o the accsoon I was wondering what is the accsoon providing ?? If you don’t have it attached as apart of the chain you’d still be able to view all cameras with the atem mini
@@jKHAHN215PA Oh I see. I do this because I monitor all cameras wirelessly in a different room away from where the recording is happening. I said this in the intro. in case a camera dies or there is a stop in recording
i know for sure that the seemo hasa recording function that allows recording the video going through the monitor (the phone ) I was wondering if the cineview nano does the same... cheers
@@YourFilmmaker Damn. Do you happen to know if you can access the video transmitted from the Nano any other way than the app? I would be nice to be able to get it into OBS through an IP address or something like that
How do you config the internal recording on cineview nano? Is there an option inside acsoon app? or just the format you set in camera? I have tried to record with cineview nano but the recording it´s too low quality sometimes even it´s 1920*1080, like acityscape pixelated.. Is there any reason or advice? thanks!
Through the app, there's a button to record and yes it's 1080p and the Accsoon cineview is 1080p and not 4K. It cannot be configured further. There's the new nano 4K but I have not had my hands on it to test. Hopefully in the near future.
@@YourFilmmaker Hi, thanks for your quick answer!! I forgot to mention, the problem it´s not really when you record the app in video mode, but when you set the camera for still pictures (M mode for example) and you try to record what it´s shown in the LCD (or evf). Thats when the resolution falls down and it´s pixelated the recording in the app. I don´t know if this is a limitataion of cineview or ir the cine2 or other can do it better. thanks!
14:25 atp you should give a tutorial of the atem mini pro with the accsoon etc.. b/c i just use a external monitor to view w/o the accsoon. Not sure exactly what the accsoon is doing in this set up b/c i do the same thing ..i just don’t have the accsoon
Hey, so I use the Atem mini Pro to view all cameras at the same time, especially the close-up cameras. Hope this answers your question.
@@YourFilmmaker ummm I do the same w/o the accsoon I was wondering what is the accsoon providing ?? If you don’t have it attached as apart of the chain you’d still be able to view all cameras with the atem mini
@@jKHAHN215PA Oh I see. I do this because I monitor all cameras wirelessly in a different room away from where the recording is happening. I said this in the intro. in case a camera dies or there is a stop in recording
@@YourFilmmaker got it thank you
@@YourFilmmaker my podcast I’m on set and on camera ! I get being away from the set ..i understand now thank you
This is by far the best overview of these devices, thanks you answered all the questions I had.
Thank you 🙏🏽 I hope you subbed
Been researching on which of these to get for weeks now. this video Just summarised 2weeks of Research. Thank you so much 🙏🙏
you're welcome
i know for sure that the seemo hasa recording function that allows recording the video going through the monitor (the phone ) I was wondering if the cineview nano does the same... cheers
Yes it does with the app.
@@YourFilmmaker thanks a lot
Are these cross compatible? I would like to use the Nano on my rig to send to the HE receiver
@@jessehavok4181 unfortunately no
@@YourFilmmaker Damn. Do you happen to know if you can access the video transmitted from the Nano any other way than the app? I would be nice to be able to get it into OBS through an IP address or something like that
Can the cineview nano record 10bit or 12bit
How do you config the internal recording on cineview nano? Is there an option inside acsoon app? or just the format you set in camera? I have tried to record with cineview nano but the recording it´s too low quality sometimes even it´s 1920*1080, like acityscape pixelated.. Is there any reason or advice? thanks!
Through the app, there's a button to record and yes it's 1080p and the Accsoon cineview is 1080p and not 4K. It cannot be configured further. There's the new nano 4K but I have not had my hands on it to test. Hopefully in the near future.
@@YourFilmmaker Hi, thanks for your quick answer!! I forgot to mention, the problem it´s not really when you record the app in video mode, but when you set the camera for still pictures (M mode for example) and you try to record what it´s shown in the LCD (or evf). Thats when the resolution falls down and it´s pixelated the recording in the app. I don´t know if this is a limitataion of cineview or ir the cine2 or other can do it better. thanks!
It made a world of difference!
Great review and info on the context your using it with thanks
You're welcome
🔥 🔥 🔥
Frames are dropping while live streaming and blinking the upper screen
Do you experience this when there is clear line of sight betwen the receiver and transmitter?
Looks like a pretty good system.
Oh yes it is