The inside of your carbon roots are so good. I've been welding schedule 10 316 stainless lately so it's been a while since I've done one roots. I want to try it again when I watch your videos.
Thanks for the video enjoyed it I slowed it down to watch the root awesome control you can tell your profession you make it look so easy but I know better lol hope all is well have a good one
Pozdrav zemljace svaka cast za svaki tvoj video.Dosta toga moze da se nauci iz njih.Kako je u vezi posla i zarade za tig zavarivaca u Kanadi.Pozdrav i sve najbolje
Hvala ti na komentaru… ima dosta posla za zavarivace, posebno za tig varioce. Kvaliteta zivota je iznimno losa, osim ako ti nesmeta-30 do -40 temperature zimi i da ti obitelj nemoze izaci iz kuce po 5-6 mjeseci zbog hladnoca… meni osobno smeta pretjerana liberna politika ovdje, sto se kosi s mojom percepcijom kvalitete drustva u kojoj bi zelio da mi djeca odrastaju… osobno gledam da se vratim u Europu ili ako bude prilika za Ameriku! Sto juznije i sto konzervativnije! 😉
Ako planiras Evropu samo Sfajcerska ili Austrija direktno sve ostalo je slabi sto se tice zarade i sto se tice zivota.Pare su na Bliskom istoku i Emiratima.Moja preporuka Amarco naftna kompanija ili Francuski Total sto se tice zarade.
If welding to the ANSI Be31.3 Code 100% x-ray could mean one weld was x-rayed 100% as in “random” (1 of 20 welds) or it can mean every weld is x-rayed and read to “severe service” criteria or to another less stringent criteria..
Hey man i have a serious question. I am a young welder but i am already experiencing some pain in my wrists from wiggling and walking the cup. How do you prevent these injuries? I hope you can give me some advice so i can keep doing what i like
Ur holding the Tig rig to tight loosen up ur hand that you hold the Tig torch in. Old head once told me he should be able to come up behind me while I'm welding and snatch the Tig torch outta my hand with no problem
no es permitido por normas, soldar una tuberia de ese diametro solo tig, con tig solo se puede soldar hasta 3 pulgadas , ojo hablo de toda la soldura, ahora primr pase y el pase para reforzar cualquier diametro
@@X3MTIG si claro, en mi pais para soldar hay que estar certificado, llevo 25 años soldando aunque ahora no hay trabajo, mig, tig, electrod revestido y flux core
always amazes me how consistent the roots are
once you have a decent sized puddle moving it's fairly forgiving
He just rolling the cup , letting it do the work
The inside of your carbon roots are so good. I've been welding schedule 10 316 stainless lately so it's been a while since I've done one roots. I want to try it again when I watch your videos.
This is art
Thanks again!
Very nice work.
Odlican video! Hvala lipa!!
Hi.ive been welding 35 yrs the toop is wonderful ❤❤❤
🙌🏽 Thank you brother!
You bet!👍
Сварочный аппарат Миллер это мощь и надёжность 💪🏼.
Great vid
Brazil say thanks for sharing this video.
Badass! Your a great TIG welder.
Great work 🔥
Enjoyed that, been out the welding game a while but getting back into it.
Right on 👍
Thanks for the video enjoyed it I slowed it down to watch the root awesome control you can tell your profession you make it look so easy but I know better lol hope all is well have a good one
Much appreciated
Really nice and informative!
Fantastic videos and great work!
Pozdrav zemljace svaka cast za svaki tvoj video.Dosta toga moze da se nauci iz njih.Kako je u vezi posla i zarade za tig zavarivaca u Kanadi.Pozdrav i sve najbolje
Hvala ti na komentaru… ima dosta posla za zavarivace, posebno za tig varioce. Kvaliteta zivota je iznimno losa, osim ako ti nesmeta-30 do -40 temperature zimi i da ti obitelj nemoze izaci iz kuce po 5-6 mjeseci zbog hladnoca… meni osobno smeta pretjerana liberna politika ovdje, sto se kosi s mojom percepcijom kvalitete drustva u kojoj bi zelio da mi djeca odrastaju… osobno gledam da se vratim u Europu ili ako bude prilika za Ameriku! Sto juznije i sto konzervativnije! 😉
Ako planiras Evropu samo Sfajcerska ili Austrija direktno sve ostalo je slabi sto se tice zarade i sto se tice zivota.Pare su na Bliskom istoku i Emiratima.Moja preporuka Amarco naftna kompanija ili Francuski Total sto se tice zarade.
Excellent fit provides a good weld
Can you do a video on filler rod feeding? How to continuously feed the rod on an entire pass without stopping to adjust the rod length?
Very nice work
great vid always quality welds!
Thank you brother 👍 it's Very nice ❤
Root pass welding this tecnic is nice
Looks very good, And you still don't use any flux?
Thanks for sharing ❤️🔥💞❤️🔥💯✅👏
Nice welding
Beautiful ❤❤❤
Always good videos! I'm having trouble with undercut on my root. On the inside of the pipe. Any suggestions??
When you say 100% Xray does that mean it must pass the highest grade or that they Xray the whole and all the welds you did?
In this case 100% X-ray both joints I did!
If welding to the ANSI Be31.3 Code 100% x-ray could mean one weld was x-rayed 100% as in “random” (1 of 20 welds) or it can mean every weld is x-rayed and read to “severe service” criteria or to another less stringent criteria..
Can you do a video showing the fill and cap as well?
Good work
Thanks
Good
Bonjour mètre, écartement est bien 2/4m merci pour savoir comment travailler...
if you have a flat roof on your 6:00 clock can it fall RT
Awesome sir if you dont mind me asking about how long have you been welding? Thanks for posting.
23 years in July!
Hey man i have a serious question. I am a young welder but i am already experiencing some pain in my wrists from wiggling and walking the cup. How do you prevent these injuries? I hope you can give me some advice so i can keep doing what i like
Ur holding the Tig rig to tight loosen up ur hand that you hold the Tig torch in. Old head once told me he should be able to come up behind me while I'm welding and snatch the Tig torch outta my hand with no problem
@real_stickyy2062
Don't squeeze the torch too tight, especially when walking the cup, if you're a beginner it's normal
Do it freehand.
be a man
Where in Canada are you working? I recognize your coveralls
How did you get into this type of work?
Hi X3M is it essential to pre-heat for tacks? thanks
If procedure calls for preheat than yes, you should!
Красавчик!
Guys I got a question, 7016 rod root pass uses dcep or dcen ?
7018? Reverse polarity DCEN
Alstom boiler?
Nice video. Can your share alloy material your welding
Carbon steel
I mean P91 material
what size cup are you running?
Guessing a 7
❤❤❤تشکر عزیزم
Just had an oil and gas valve shutdown emergency supply manufacturer open up in the neighbourhood.
Hello
Yo, X3M, whats the average $/h in your experience for welders with few years of experience with welding pipe?
It all depends on your welding tickets, and if you are working on union or nonunion projects…. average here in Alberta is $40/hr - $52/hr CAD
no es permitido por normas, soldar una tuberia de ese diametro solo tig, con tig solo se puede soldar hasta 3 pulgadas , ojo hablo de toda la soldura, ahora primr pase y el pase para reforzar cualquier diametro
It goes by thickness of the wall not by diameter, and you have to be certified for that as well !
@@X3MTIG si claro, en mi pais para soldar hay que estar certificado, llevo 25 años soldando aunque ahora no hay trabajo, mig, tig, electrod revestido y flux core
❤❤❤❤❤❤
👏🏻
Good jop
سلام
😮😮😮
❤❤❤