Land Rover R380 suffix J gearbox overhaul Part 1 Disassembly
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Land Rover R380 suffix J gearbox overhaul
Part 1
Disassembly
As TH-cam have moved the goals to become monetized, and I have a niche channel, funding is never going to happen, so I have set up a Patreon as I would like to get a higher speed upload, which means I get post more videos, AND in 1080
Takes me about 2.5 hours to upload a 15 minutes at the moment.
I will be giving credits to my supporters at the end of my videos from now on. I am very grateful to one and all!
/ britrest
You can now support me on PayPal if you like this particular video!
paypal.me/britrest2018
If you have a pre 2005 Land Rover problem and do not know how to fix it, drop me a line! Maybe I can help!
britrest@britrest.com
I’ve got a guy in Brasil trying to rebuild an R380 but the tools cost more than a rebuilt one. Do you want a cheap vacation and you bring a few tools with you? The churrasco (Brazilian BBQ) is great!!!
Do a search on my home page for R380 tools = they can be made locally
Mike,
I got a used unit from a scrapyard really cheap because the said the input bearing was loose. I was not too concerned because I was going to fit a full rebuild kit. On dismantling it, yes it was loose, mainly because only the inner and outer races were left. There was no trace of the cage or the rollers anywhere, just a few metal particles on the magnet and in the filter. Have you come across this before? If I didn't know better I'd say some one had been in there and removed them but all the bolts were untouched and the case was sealed.
I think I have seen it all - this is why I only give scrap prices for used gearboxes - unless you drive them, they are always 'fantastic box mate'
My R380 has over 400,000kms, It is a bit crunchy going into first, or second.
Hi Mike I'm re-building my R380 gearbox but there's no numbers that I can make out is there away to
find out if its j k or L I don't know the history of the box it's a short stick out of a discovery that's all I know
By the way fantastic vids
Steve
Tough one without a number - they changed the bearings to bigger ones on the last of the R380 as in the Td5 - what year is the disco?
Mike,
Any tips on removing the oil pump? I'd really like to take a look and check it's condition if I'm going to the trouble of rebuilding the box. However my first torx bit broke in the head, my ultrasonic cleaner managed to vibrate that loose. Bought an impact version of the torx bit and that looks as if it's going to break! Thought it would have been much tougher, btw, I've tapped the end of the screws to try to break them free, made no difference
It can be very difficult to get out - in the past I have drilled off the heads and tapped out the pump from the other side then the screws come out easy - I replace with regular Allan headed screws
Hi Mike, my R380 mainshaft had worn splines on the synchro hub for Reverse and 5th. Do you then automatically need a new shaft? What happens if these splines are completely gone…can you still select those gears and drive on? Many thanks 🙏
If you have no drive on 5th and reverse the lay-shaft has probably snapped at the bottom - needs a full overhaul
@@BritannicaRestorations sorry, i was not clear obviously. I had problems with popping out of fourth gear and saw that that synchrohub had missing part (spring) and synchro ring cracked. But when taking of all gears from the mainshaft i saw that the splines on main shaft are worn (for driving the synchrohub of 5th and R). What happens when those splines go out…impossible to select 5 and R?
Another thing…
Was driving without oil for some time and was wondering how to recognize if gears have been damaged from that? Much appreciation from Amsterdam! You’re the best
Any spline wear is bad - missing parts also -maybe rebuild before it gets worse!
Hi Mike. In this video intro you mentioned that on your 300 TDI you replaced motor / gearbox with an Isuzu. Could you please let me know which Isuzu… gearbox and transfer too and what there a lot of conversion issues?
4Bd1T engine from a light truck, custom adaptor between Isuzu bell housing and R380/LT230 1:22 ratio
Runs great but a lot of work
disassembled my box and the split collar design is different nor does it have the roll pin,but it does have the hole for a roll pin lock,any idea? It's also a suffix J box
That is standard for suffix J
@@BritannicaRestorations thank you so much, i was freaking out thinking the roll pin lock fell out in the box itself or something
I am a new follower of you and I am really getting helped by your videos.
I am in Nairobi Kenya and work for a British Army contractor here in Kenya.
I kindly would love to request you to suggest to me land rover repair manuals that can be helpful to me because I cannot get the army publications that we use here. Reason for this is because I started a small shop and that would be of great help.
Thank You.
Eric - this is what you want
britrest.com/product/land-rover-information-on-memory-stick-mostly-pre-2007/
Thank You very much for your support.
I have become an addict of your videos. I am not sleeping! I have not found anyone as resourceful as you are! Thank you.
Great video! Is there a big difference from a Suffix L R380, as that is what I have :)
It is hard to say what exactly they changed every time they change the suffix - but they have got better (sort of)
Hi Mike, how difficult is it to reconfigure a Disco R380 diesel box for use in a V8?
V8 Defender that is!
Tricky - the first motion shaft is longer and I have an idea the gearing is different - depends on the gearbox numbers too - and a Defender R380 is not the same as a Disco R380 for the shift mechanism
Mike,
Another quick question. My box is a suffix L, and on dismantling the main shaft, I noticed that the roll pin you punched out, wasn't there on mine. Is this right, I'm sure someone has rebuild this recently and has made a pig's ear of it, but I'm not sure what the pin does?
Paul
Duh, the rest of the video answers the question!
The pin was discontinued on later boxes - it was used to hold the split rings in place
What kind of gearbox oil have you used? Looks like ATF?
Thanks.
yes
@@BritannicaRestorations isn't that a manual gearbox? I didn't know you could use ATF honestly
Hi my gearbox has suffix L have you heard of that ?
Yes
Is it possible to switch from LT77 to R380
possible but the R380 will need a short input shaft and bell housing $$$$
Thank you. Meaning I can easily use the R380 with its original transfer case
Not getting much sleep watching these vids mike...lol J. Scotland
Lol! Well, someone had to do it - took me 2 days to do each box!
Mike
got so confused coz he constantly called it the wrong gearbox. (LT77).
I have a 95 disco that needs new bearings, instead of just replacing the box I’m going to have a go at rebuilding myself, thank you for these videos they will really help me. Now to make a brew and get watching! New sub too 👍
Good luck!
Thanks!
No problem!
Thanks!
No problem!
Hi Mike thank you for your quick reply, as for the year of the gearbox I don't know its one I picked up
from a land rover dealer it looked as if it had been in his yard for a few years I called him this morning &
he said its more than likely a early gearbox.
Please keep up with the fantastic videos I spend hours & hours watching them more so now with being on
lock down
All you have to do is find the last letter on the raised plate on the right hand side looking forward - bit of very fine sand paper works for me
Thank you for this nice video. You helped me so much!
Sorry for the multiple replies. Rather than replacing the input shaft as I discussed in my previous question, it seems to me a better option is to source a 300tdi R380 gearbox. I have been able to find some nice low mileage Defender 300tdi R380 gearboxes in the states (removed for LS conversions). I have a surplus V8 R380 gearbox as I am converting a 5 speed Disco 1 with V8 to 300tdi. It seems you could replace the Defender 300tdi R380 shifter/selector parts with the those removed from a V8 R380 Discovery gearbox. Is that correct? It seems like a simpler job than changing the input shaft on the V8 R380 and locating the 300tdi bellhousing and other bits.Or, maybe you wouldnt mind selling me one of those Discovery 300tdi R380 gearboxes you mention at the beginning of this video.
You need to change the shift mechanism to a Discovery if they are Defender boxes - not as easy as bolting a cover on, as the selector linkage inside the box needs changing over
You can change Disco to Defender as Ashcroft do a kit, but not the other way round - kinda technical
Nice video, what is the difference between the R380 for petrol and diesel? is the difference in the shafts just the length? can they switch?
Depends which petrol - V8 had a longer shaft - the ratios were different on some boxes - you have to match the right input teeth to the length - there were many variants
My Defender is stuck in second gear (shifter is completely stuck, can't get it out with extreme pressure) but it behaves as if in neutral (engine starts, rolls as if in neutral even with the clutch engaged). Any idea what could be causing this?
Sounds like something has broken internally - is there any oil in the transmission?
@@BritannicaRestorations to be honest, there was very low oil
Excellent ! Looks like I could fabricate a puller for the collar fairly easily as well. Thanks for taking the time on this :)
Don't forget to make something to push it back on - do not hammer it on
@@BritannicaRestorations I'm hoping to use the money saved to buy a press. Maybe a large tube of the correct diameter ? Have lost second gear and it's been making noises for years now. Did the transfer box last year so I feel I now have the ability to do this
Can you tell me if the 300tdi input shaft and the V8 input shaft can be replaced by one another? I have a V8 R380 in excellent condition and want to use it for my 300tdi discovery. I know the gear ratios are a little different but not significant. I know the bellhousing and some other exterior parts need to be changed but the input shaft is the most complicated aspect.
I need to know the gearbox numbers but they should be 22 tooth each
Britannica Restorations Ltd I will check the V8 gearbox number and reply back. I won’t be able to check the 300tdi gearbox number as the input shaft is being sold as a loose part. It does say it is from a J suffix gearbox. I could ask the seller to count the teeth. Many thanks for your help.
Britannica Restorations Ltd I have a related question. What is the difference between the Discovery R380 and the Defender R380?
The gearbox selector mechanism - the Defender Hi/low diff-lock is behind the gearstick and the Disco is at the front
As always good stuff thanks, Just took the front cover off my R380 fo replace the oil seal (saw it was leaking during a clutch change) and the Lay shaft cup just fell out!! looks like the case is worn or the bearing - should it fall out and rattle in your experience or is something worn - I'm guessing it must be!! Thanks in advance and keep up the good work
The outer race is not a press fit and can come out - should be a neat fit - not too tight, not too lose
th-cam.com/video/N7aki5opF3A/w-d-xo.html have a look what do you think knackered??? thanks
Sorry and thanks for your reply
Hmm - I have a feeling it is lose in the cover but a decent fit in the housing
@@BritannicaRestorations thanks for finding the time to respond - yeah layshaft cup too loose new cover ordered - see what happens - may hopefully help someone else out if they have the same problem - just hope the bearing cup is ok or will have to change the whole bearing which means gearbox out!!!!!
where can i buy the puller
from
Try Dingocroft UK