Hi, thanks so much for the video! It was very helpful. I managed to repair the rattling sound but my focus is still not working. any ideas what my issue could be? maybe the electrical connectors on the lens or the pcb isn't connected properly? any help is really appreciated
Hi. Thanks a lot for the video. I’m having a problem with the same lens. It fall being attached to the camera and the mount base plate bend, now it’s curvy at some point. It’s there any chance to fix that? I’ll be really thanked if you can help me. Good luck!! Thanks a loy.
Hi bro with your guidance i successfully disassembled my lens because of back focus issue even in manual focus also it blurred in captured photo and assambled and i found my coil glue was good but back focus issue not solved so i adjusted that white plastic screws in inside and my problem was increased now how can i adjust it to previous position to achieve perfect focus position
sel2470za fe sony it if I want to remove only the objective lens? large front lens If the rubber doesn't come off How can I do it? Due to dust mold on the frontmost front lens
help, my lens does not have this problem What other solution can be I want to repair it the area that you are pasting on my lens is well pasted even so it does not focus what can it be?
@@unclesullysprojects9379 If I have the focus problem, check and it doesn't seem to have a short circuit or to be broken, what other solution or what else could be affecting the focus of the lens?
@@martgameplay3525 in a fall/drop, internal mechanism that may have some play to move might induce internal movements that may cause other issues such as a dislodge, breakage of fine wires etc. i
![2 марта 2023 г. [отчет] canon 24-105 f4 ревизия](/img/n.gif)
Thanks for video, I just fixed the squeaky AF
Hi, thanks so much for the video! It was very helpful. I managed to repair the rattling sound but my focus is still not working. any ideas what my issue could be? maybe the electrical connectors on the lens or the pcb isn't connected properly? any help is really appreciated
Hi. Thanks a lot for the video. I’m having a problem with the same lens. It fall being attached to the camera and the mount base plate bend, now it’s curvy at some point. It’s there any chance to fix that? I’ll be really thanked if you can help me. Good luck!! Thanks a loy.
I did not drop or knock my 24-70 , i am having the same issue? Is using the epoxy glue a perm fix or just temporary ?
Hi bro with your guidance i successfully disassembled my lens because of back focus issue even in manual focus also it blurred in captured photo and assambled and i found my coil glue was good but back focus issue not solved so i adjusted that white plastic screws in inside and my problem was increased now how can i adjust it to previous position to achieve perfect focus position
I have a Sony 24-70 f/2.8 ZA lens and the front barrel is loose and now the zoom is binding. Any ideas on a fix short of sending it in?
sel2470za fe sony it if I want to remove only the objective lens?
large front lens
If the rubber doesn't come off
How can I do it?
Due to dust mold on the frontmost front lens
help, my lens does not have this problem
What other solution can be I want to repair it
the area that you are pasting on my lens is well pasted even so it does not focus what can it be?
I'm sorry I speak little English but I use a translator
@@martgameplay3525 no worries. So your lena having the same problem?
@@unclesullysprojects9379 If I have the focus problem, check and it doesn't seem to have a short circuit or to be broken, what other solution or what else could be affecting the focus of the lens?
@@unclesullysprojects9379
this happened to the lens after a subsequent fall mind if it focused but something sounded inside it and it stopped focusing
@@martgameplay3525 in a fall/drop, internal mechanism that may have some play to move might induce internal movements that may cause other issues such as a dislodge, breakage of fine wires etc. i