You might want to put anti gel into your gas tank if that's a duramax diesel. Sometimes with freezing temperatures the diesel can gel up causing the truck not to start. Also not sure if your model came with a block heater but if you're planning on driving throughout the winter it might be a good idea to invest in one so that your oil and diesel injection don't freeze or gel
Don't be discouraged with those gaps. You did a phenomenal job considering what the fitment was prior. When the gasket seal is installed you will be pleased with the results.
Shoot I’m 8 minutes late but I hope everything going good so far I love all the cars and builds but without you we wouldn’t have the content I appreciate the grind keep it up bro
Try sanding in a different direction with each grit of sand paper. Because it will help you see when you have all the previous sandpaper scratches sanded out
If your ran all the fuel out of the truck you might have to take the fuel filter out and Prime it again. That’s what happened on my semi truck one time but it might be different in a pick up truck. Hope that helps
Good work, yeah the BRZ does look cream, the Aspin White looks amazing after your detail work, for some reason I thought it was Alpine white, so many shades of great whites, it’s an Ocean of white options, anyways sic as dude, best wishes also to Cam and fam, thinking of him🤘
Hey devin been watching consistently for a few months now love the work you do. Also I don’t mean this in a bad way but your TH-cam pic remind me of the giga chad meme
Glad to see you finish up the subs ,it really came out nice.just don’t beat the shit out of it yet,admire it and have fun with it first.then onto the next car.😎😎😎👍👍👍
I drive diesel trucks for a living, I always turn the key in the on position til the glow plug light goes off, and then i turn it over, and I live in Canada so she gets cold here, try turning the key for a minute or 2 before you turn it over you should be okay.
You would of had a air lock in the fuel system, the best way got rid of if you run out of fuel again is to crack open the fuel line on top of the injector then turn the engine over until fuel sprays out the fuel pipe then close it back off. You may have to do it on all the injectors. The engine should then start with no issues.
i hear you on being sick of body work for a while, im in process of chopping and swapping rear quarter panel. someone side swipped me and thought it be a great learning exp to do it myself. got a replacement clip. and holly shit, im about 2k spot welds in and still drilling ffor panel transfer.. sucks ass!!!! F body work, there is a reason that shit isnt cheap.. takes for everrrrrrr
Man you need those inlays on the tails.. That clear throws the look off imo.. The Susti is banging though. .... Mold that bumper !!! That would be sick AF !!
Would you consider learning how to mold your own custom fender flares out of fiberglass? It could be something new to learn, and solve the front fender issue.
Love the hatch! Keep up on all the awesome vids I’ve always wanted a hatch but are hard to find . Are you thinking about selling the hatch? I know your always grinding with builds 👍🏽👍🏽👍🏽👍🏽
Truck did this to me before as well, turns out it was from backing in to my sloped driveway wasn’t allowing the pump to prime. Just pull in forwards from now on. Should solve the issue.
you should just leave it like it is. Car looks way better than when you got it. I thought it was a waste when you first got it but it looks like a totally different car now.
It could be that the engine had to adjust the fuel trim and that can cause a check engine light and when it fixes it self if it does it will disappear such as engine is running lean or rich.
So duramax has a fuel rail pressure if it sat over a couple of days in the cold it will bleed down. And when you go to start it and the vehicle registers no presssure it will set the code. And after a couple ignition cycles of it having pressure it will clear out.
My b8 A5 is Ibis white, shit looks killer👌🏻👌🏻 …. I was going to write this whole thing talking about you n your cars but not sure how to go about wording it together yet?? So for now just going to say that your fucking awesome🤘🏻🤘🏻 keep killing it man 🤜🏻🤛🏻
Just reminding you the scanner you had one in the truck but you said someone broke into the truck n take the scanner and your wallet take easy bro think you have a lot on your mind meaning with your bro and family
Believe it or not you can start nibbing with 800 grit, just cut down a block & use 3 inch paper. You can probably pull off 10 or so passes then go 1500, 2000, 3000 so forth
Bro please use masking tape on both sides of the run so the blade doesn’t scrape into surrounding areas. 1 slip up and you painting the whole panel again.
The truck problem used to happen on my subaru legacy, I had to feather the gas pedal while cranking it to get it going, i researched it alot, but apparently by pressing the pedal, you're sending through the fuel line again. Often happens when you're low on gas and the fuel line doesn't have enough fuel in it.
You might want to put anti gel into your gas tank if that's a duramax diesel. Sometimes with freezing temperatures the diesel can gel up causing the truck not to start. Also not sure if your model came with a block heater but if you're planning on driving throughout the winter it might be a good idea to invest in one so that your oil and diesel injection don't freeze or gel
Most stations up in id,wa,mt sell blended diesel during the winter, that said I also carry some power service diesel 911 for when it get super cold
Took the words out my mouth. Would Guarantee it's one of those two issues
my dad had a turbo diesel f350 and he had to plug in the block heater every morning for that exact reason (we live in Canada)
Oem bumper and extensions are the move for sure. Looks great Devin!
Agreed especially if it’s a 2012-2014
Don't be discouraged with those gaps. You did a phenomenal job considering what the fitment was prior. When the gasket seal is installed you will be pleased with the results.
Shoot I’m 8 minutes late but I hope everything going good so far I love all the cars and builds but without you we wouldn’t have the content I appreciate the grind keep it up bro
Try sanding in a different direction with each grit of sand paper. Because it will help you see when you have all the previous sandpaper scratches sanded out
Great paint job and susti looks amazing well done all that hard work paid off 👌🏼🔥
I'm currently sick in bed, this is making me relax and feel better
Looks good to me for your first full spray job nice work and so many hours put in 👊👌
If your ran all the fuel out of the truck you might have to take the fuel filter out and Prime it again. That’s what happened on my semi truck one time but it might be different in a pick up truck. Hope that helps
Those Dmaxs self prime.
@@DSM907Maniak oh I didn’t know that. That’s pretty cool
Good work, yeah the BRZ does look cream, the Aspin White looks amazing after your detail work, for some reason I thought it was Alpine white, so many shades of great whites, it’s an Ocean of white options, anyways sic as dude, best wishes also to Cam and fam, thinking of him🤘
I love all your builds they have inspired me to do the same
Devin is so dedicated to his craft. This video was heat
I just can’t wait until the engine building 😍
Hey devin been watching consistently for a few months now love the work you do. Also I don’t mean this in a bad way but your TH-cam pic remind me of the giga chad meme
was very inspirational to see this build, like all your others, can't wait for your future projects!
Sheesh, that paint job is insane for your first one Devin. Only goes up from here.
let's go brandon
Glad to see you finish up the subs ,it really came out nice.just don’t beat the shit out of it yet,admire it and have fun with it first.then onto the next car.😎😎😎👍👍👍
Leave the roof white looks amazing
I drive diesel trucks for a living, I always turn the key in the on position til the glow plug light goes off, and then i turn it over, and I live in Canada so she gets cold here, try turning the key for a minute or 2 before you turn it over you should be okay.
Looks awesome! How's your brother doing, any updates just in general?
You would of had a air lock in the fuel system, the best way got rid of if you run out of fuel again is to crack open the fuel line on top of the injector then turn the engine over until fuel sprays out the fuel pipe then close it back off. You may have to do it on all the injectors. The engine should then start with no issues.
Devin with how much you cut/polish cars, you should definitely look into getting a Flex or Rupes DA. That Porter Cable shakes a lot!
Check the diesel particulate filter. I think need to change or clean it probably. Lol. Plus need to drive in extended time at constant speed
i hear you on being sick of body work for a while, im in process of chopping and swapping rear quarter panel. someone side swipped me and thought it be a great learning exp to do it myself. got a replacement clip. and holly shit, im about 2k spot welds in and still drilling ffor panel transfer.. sucks ass!!!! F body work, there is a reason that shit isnt cheap.. takes for everrrrrrr
Couldn't wait for this day... !!!
Man you need those inlays on the tails.. That clear throws the look off imo.. The Susti is banging though. .... Mold that bumper !!! That would be sick AF !!
Half way through the video and I can not wait for the transformation video this car is epic and my all time dream you did good work kid hahaha
I love that we are calling it the SUSTI.
This build is 🔥🔥🔥
love to see a build so fast
02:43 am, watching these vids are better than sleeping 😴 💤
Great Job bro
Would you consider learning how to mold your own custom fender flares out of fiberglass? It could be something new to learn, and solve the front fender issue.
OEM bumper is the move
Loving the subaru content
I hope I can get my hatch to look like yours soon 🔥
Good job my dude
Christmas miracles do happen 🎄💯✨
Love the hatch! Keep up on all the awesome vids I’ve always wanted a hatch but are hard to find . Are you thinking about selling the hatch? I know your always grinding with builds 👍🏽👍🏽👍🏽👍🏽
Well boys you know its only christmess if devin dash is all light up ...
Truck did this to me before as well, turns out it was from backing in to my sloped driveway wasn’t allowing the pump to prime. Just pull in forwards from now on. Should solve the issue.
Awesome job!
you should just leave it like it is. Car looks way better than when you got it. I thought it was a waste when you first got it but it looks like a totally different car now.
Mold the panels i love that front bumper
It could be that the engine had to adjust the fuel trim and that can cause a check engine light and when it fixes it self if it does it will disappear such as engine is running lean or rich.
DEVIN ! Dont use a Razor Blaze 🤯🤯🤯
Get a flat mixing stick and put the Sand paper
So duramax has a fuel rail pressure if it sat over a couple of days in the cold it will bleed down. And when you go to start it and the vehicle registers no presssure it will set the code. And after a couple ignition cycles of it having pressure it will clear out.
I’ll say it again, consistency, quality and quantity, my man Devin always pushing out great content, things are looking great for Susti! 🤝
Also I’d say leave the roof white, I think it’s looks sick just how it is!
devin should do sidewinder turbo kit on evo x cause I love his evo x
Great vid btw
Used to think orange peel is the paint job having an orange hue
Just running out of diesel is the problem SES on and out you still have history codes check them possibly low fuel rail pressure
My b8 A5 is Ibis white, shit looks killer👌🏻👌🏻 …. I was going to write this whole thing talking about you n your cars but not sure how to go about wording it together yet?? So for now just going to say that your fucking awesome🤘🏻🤘🏻 keep killing it man 🤜🏻🤛🏻
Looks awesome 👌👏
Let’s go baby
anyone else laugh at the Prius statement on the bottle at 17:33
Legendary
Just reminding you the scanner you had one in the truck but you said someone broke into the truck n take the scanner and your wallet take easy bro think you have a lot on your mind meaning with your bro and family
A deven mould the front wide body kit ti the front bumper .
Did you forget to wrap the door trims on the other side?
Didn't you lose your code scanner with the truck breakin? XD I thought you said that last vid hahah..
Believe it or not you can start nibbing with 800 grit, just cut down a block & use 3 inch paper. You can probably pull off 10 or so passes then go 1500, 2000, 3000 so forth
Anytime you run a diesel to empty shut off, you will need to change all the fuel filters, and fill up the damn tank.
Please Get The OEM Bumper For The Bois 🔥👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾😏 OEM WOULD LOOK 1000X BETTER
😷 The grind is real
I’m here!!!
Maybe a air bubble in an injector of line
Hey Devin, Guys from throttle , they have a Carbon Fiber Blade for your Car.
Idk if anyone pointed this out yet but the Sti supposed to come with turn signal on the side mirrors. Not sure why this one didn’t come with one.
Been waiting bro
You guys like your road salt.
I assume you've done the basics like a fuel filter and the occasional injector purge?
Crystal white pearl K1X
I say oem bumper with wide body panels
Change the rims on the subie
Get Alko to hook you up with some carbon fiber wrap ? He probably know of some good brands he uses :D
Micro fiber cutting pad on the DA would expedite the process. I know im too late now tho lol
Look so good
🔥💯👌🏽
Could be a glow plug issue, are you allowing the system to prime and let the glow plugs warm before starting it ?
Freshkicks is the the guy I saw use the carbon wrap I think your looking for. I would reach out to him if you can he’s in cali
Therapeutic watching this🔥
Greetings from Russia!
Where can i get that rear bumper
1.05 Let's go Brandon 🤪
Please tell me what head unit you have in the Evo
BING BONG
Bro please use masking tape on both sides of the run so the blade doesn’t scrape into surrounding areas. 1 slip up and you painting the whole panel again.
Can you make merch from Carhartt raindefender hoodies? Will buy 100%
What does anyone recommend for a first product to use when paint correcting to properly get scratches out paint?
Way to go Brandon!
Let’s goooo
I have a ej257 long block if ur still looking
The truck problem used to happen on my subaru legacy, I had to feather the gas pedal while cranking it to get it going, i researched it alot, but apparently by pressing the pedal, you're sending through the fuel line again. Often happens when you're low on gas and the fuel line doesn't have enough fuel in it.
Mold them extensions man. No more f’ing around with them
Get a Varis front bumper
You ran it out of diesel haha and it was probably a no start check engine light low fuel pressure
Don't destroy it now please ahahha 😅
wouldnt be surprised if you had a bad o2 sensor
Mold them