place metal shavings or steel wool to prevent the gasoline from foaming. Foam is dangerous and can suck fire inside and there will be a fire or explosion, and pouring too little gasoline is too much
Absolutely fantastic idea bro. From 2 months I've been searching for a project like this to improve my idea, which is the production of acetylene gas by combining both water and calcium carbide, but you gave me a marvellous idea to improve my project in which I will use acetylene gas for the welding purpose. Heartfully thanks a lot for helping me👍
Ôpa até que enfim um invento tecnológico acima do tempo para bens certamente quero um deste trabalho com refrigeração e preciso com frequência soldar tbos de cobre e alumínio.
My heart hurts in a way that to explain would be unfathomable an ache so bad and so in depth I feel I could physically have a heart attack from it fluttering from pain Idc if this makes you feel happy or sad I just wish it would go away because I can't keep up with the pain I just wish it would stop hurting I loved you so much but deep down I always knew and that's why I never did the things I was supposed to
best version of this i've found, thank you. The water bottle is a flashback arrestor I assume? In my reading I've discovered that such things are often made of metal screens, when flame tries to go back up a tube it can't get through the screen because the metal absorbs enough heat to extinguish it. Would make this more compact. I'm trying to decide between this air pump method and ultrasonic fogger safety wise, hmmm
i have question that what if we put a kind of valve at air pump at suction side, when we turn it off it will automaticly turn off oxygen supply pls correct me if i am wrong, i am not a science student
hello, I'm from Indonesia. I want to ask, I have assembled it according to the video, but what is the theory for the nozzle tip? I tried using the tip of a syringe, but the flame wouldn't last, it wouldn't sustain. what is the theory of making a nozzle tip?
Nice job! The only other observation I would make is that the bottle holding the gasoline looks a bit "tippy". This might be a possible fire hazard. Both bottles mounted to a scrap of wood board would address this issue.
Mmmm i feel like the half a million 90 comment video from india about a torch that looks surprisingly similar to a butane jet flame isnt too dependeable
The air flowing through the system picks up enough gas to combust like in a carburetor. The ratio that you want is 15 parts air to one part gas so you don't have to pick up a whole lot of gas with the air.
its to keep the fire flashback from reaching the gas bottle it the same set up for a hydrogen fuel cell... unfortunately one gallon of gas is equal to 20 sticks of dynamite.. i had a fire flash back from a hydrogen fuel cell i built... blew it up in my kitchen left me soaked with water whey more safer because you are creating a gas from water... this is insanely dangerous and unintelligent to operate indoors cool video to watch or assemble what he built but this video could harm people that dont know what they are doing
@@kapilsethi8054 parts from old torch lighters insanely dangerous i will copy my message i left for someone asking what the water is for;;;;;;;;;:::::::::its to keep the fire flashback from reaching the gas bottle it the same set up for a hydrogen fuel cell... unfortunately one gallon of gas is equal to 20 sticks of dynamite.. i had a fire flash back from a hydrogen fuel cell i built... blew it up in my kitchen left me soaked with water.. whey more safer because you are creating a gas from water... this is insanely dangerous and unintelligent to operate this set up indoors.. cool video to watch or assemble what he built but this video could harm people that dont know what they are doing
@@plew4528 I agree .Ive done the reverse of this to start engines to test them if no carburator installed etc... The water gets contaminated with gas after long enough and then your countermeasure to an explosion becomes the detonator... if you ad just a drop of petrol in a 20L container (sealed) and compress the air inside just slightly , you have a bomb. By the way your comparison to tnt isnt fair since petrol needs sufficient air (oxygen) to burn whereas tnt or gun powder etc.. has its own oxidization process. but that gallon of fuel in a big reservoir of compressed air = big SHIT! On a final note : Petrol where i live (south africa ) is too expensive to do this with...lpg is readily available , far safer and cheaper...
@@hermanbotha1449 yes you are right but the comment I made is from the training I received from my job it's not made up.... I'm aware of the triangle fuel, ignition, and oxygen take one away and you are safe... if you have a gallon of gas sealed in the house during a fire what will happen when the pressure builds? Engines can actually run on vapors... hydrogen gas can't unless it's tuned for it.... but add that to a small flow of gas and you will get an efficient burn... older model cars can have hydrogen fuel cells and increase gas mileage exponentially...
Everything is fine. But there is one drawback, don't do this again. Where there is gasoline in the bottle, place metal shavings or steel wool to prevent the gasoline from foaming. Foam is dangerous and can suck fire inside and there will be a fire or explosion, and pouring too little gasoline is too much
At first, I was nervous, what was gasoline? I only know petrol, carosine and diesel. Now I know, petrol and gasoline are siblings. Just don't know, which one is his brother or sister 😁😂🤣.
At first, I was nervous, what was gasoline? I only know petrol, carosine and diesel. Now I know, gasolie and petrol are siblings. Just don't know, which one is his brother or sister 😁😂🤣.
@@ARCSTREAMSthis ones are mostly for heating, for welding you'll need acetylene, try looking for one of these that works with hydrogen, it could do something
place metal shavings or steel wool to prevent the gasoline from foaming. Foam is dangerous and can suck fire inside and there will be a fire or explosion, and pouring too little gasoline is too much
من برای جوش المینیوم و برنج به این نیاز دارم و حتما درست خواهم کرد .
واقعا عالی هست .
🔥Simple yet ingenious 😃👍
Absolutely fantastic idea bro. From 2 months I've been searching for a project like this to improve my idea, which is the production of acetylene gas by combining both water and calcium carbide, but you gave me a marvellous idea to improve my project in which I will use acetylene gas for the welding purpose.
Heartfully thanks a lot for helping me👍
🙏
nice and very useful, ty
Cool now I can get into the safe 😅without worrying about carrying heavy stuff this way I can carry a lot more money and less equipment 😅😅😅😅
Perfect..👏👏👏
Ôpa até que enfim um invento tecnológico acima do tempo para bens certamente quero um deste trabalho com refrigeração e preciso com frequência soldar tbos de cobre e alumínio.
Buena antorcha.. para los que no saben.. se utilizaba mucho para la joyería. Hace 50 años atras
ok
@@creative4979você é um grande gênio parabéns
Nice, economical design, self sufficient for small work. Really wonderful and useful information 👍🙏 thanks from Jawaharlal Bharat INDIA
My heart hurts in a way that to explain would be unfathomable an ache so bad and so in depth I feel I could physically have a heart attack from it fluttering from pain Idc if this makes you feel happy or sad I just wish it would go away because I can't keep up with the pain I just wish it would stop hurting I loved you so much but deep down I always knew and that's why I never did the things I was supposed to
Genius idea when fitted with a gas buner will it work like cooking gas and for the practical shown it seems it can work well with metal gas welding
best version of this i've found, thank you. The water bottle is a flashback arrestor I assume? In my reading I've discovered that such things are often made of metal screens, when flame tries to go back up a tube it can't get through the screen because the metal absorbs enough heat to extinguish it. Would make this more compact. I'm trying to decide between this air pump method and ultrasonic fogger safety wise, hmmm
Thank you for your useful information
🙏
i have question that
what if we put a kind of valve at air pump at suction side, when we turn it off it will automaticly turn off oxygen supply
pls correct me if i am wrong, i am not a science student
hello, I'm from Indonesia. I want to ask, I have assembled it according to the video, but what is the theory for the nozzle tip? I tried using the tip of a syringe, but the flame wouldn't last, it wouldn't sustain. what is the theory of making a nozzle tip?
kreatif respet selalu.dari indonesia.
Muy buena idea gracias por compartir saludos
Nice job! The only other observation I would make is that the bottle holding the gasoline looks a bit "tippy". This might be a possible fire hazard. Both bottles mounted to a scrap of wood board would address this issue.
🙏
Very cool!
That's cool torch.
Mantab sekali brothers ide yg sangat kreatif dan menginspirasi🙏🏼🙏🏼🙏🏼
The max temperature it will reach and the time required for reaching ?
Really cool.
Good job!
nice
عالی و بی نظیر.
Cool project, but what's with all the glue?
Hello, what is the name of the nozzle holder made of in the market? What did you use instead of the nozzle holder? Please send the link to buy it
I wonder how a high frequency transducer would work in the first chamber.
Your torch can burn iron wire . And can you melt brass wire
Посмотри в Гугле температуру горения бензина
Electricidade para ligar o motor?
where to get this nozzle?
anybody provide the link
Mmmm i feel like the half a million 90 comment video from india about a torch that looks surprisingly similar to a butane jet flame isnt too dependeable
another air pump to mix air at the nozzle will increase temperature
Мужик - спасибо тебе огромное
Thanks for video
I used oxygen motor and size 9 ingection needle but itis not working i get same the water and petrol why is that 😢?
what kind of gasoline are you using? zippo? naphtha?
(normal gasolin (gas
How high is the temperature?
excellent
Esta muy bien 👍, pero si no quieres hacerlo con gasolina puedes hacerlo con un generador de hidrogeno y la llama es mucho más potente, un saludo
How high is the temperature?
@@antoniocarlosrossini2133 hasta 1985 °C
لكن للأسف مولد الهيدروجين عند الإحتراق يولد الكثير من الماء وهذا يؤثر على جودة اللحام
@@mksimo70 gasoline also generates water when burning. Not as much as hydrogen does, but still does
How to make a hadle
Very nice to aides
It looks really janky, but it works?! I’ll be making this… thanks!
can i welding using it?
What's the equipments name for gun
how does it work?
Nice but I don't understand how the gasoline is supposed to turn into gas that you can burn ?
The air flowing through the system picks up enough gas to combust like in a carburetor. The ratio that you want is 15 parts air to one part gas so you don't have to pick up a whole lot of gas with the air.
What is the water for?
its to keep the fire flashback from reaching the gas bottle it the same set up for a hydrogen fuel cell... unfortunately one gallon of gas is equal to 20 sticks of dynamite..
i had a fire flash back from a hydrogen fuel cell i built...
blew it up in my kitchen left me soaked with water whey more safer because you are creating a gas from water... this is insanely dangerous and unintelligent to operate indoors cool video to watch or assemble what he built but this video could harm people that dont know what they are doing
th-cam.com/video/eacLgrqRdyk/w-d-xo.html
probably so the flame doesnt jump into the bottle
it makes it sexy
You should sell a kit
can weld Copper ???
Does it work with alcohol?
Thought fuel and water didn't mix?
It is for work safety
it doesnt ...
How to make a touch canceled notice? plzz tell me
How to make a touch canceled notice?
Muy legal
Hi dear sir:what did you use for nozle?
Don't worry he doesn't answer... I had asked the same question in his previous video of this kind and he didn't reply that time also.
@@kapilsethi8054 parts from old torch lighters insanely dangerous i will copy my message i left for someone asking what the water is for;;;;;;;;;:::::::::its to keep the fire flashback from reaching the gas bottle it the same set up for a hydrogen fuel cell... unfortunately one gallon of gas is equal to 20 sticks of dynamite..
i had a fire flash back from a hydrogen fuel cell i built...
blew it up in my kitchen left me soaked with water..
whey more safer because you are creating a gas from water... this is insanely dangerous and unintelligent to operate this set up indoors..
cool video to watch or assemble what he built but this video could harm people that dont know what they are doing
@@plew4528 I agree .Ive done the reverse of this to start engines to test them if no carburator installed etc... The water gets contaminated with gas after long enough and then your countermeasure to an explosion becomes the detonator...
if you ad just a drop of petrol in a 20L container (sealed) and compress the air inside just slightly , you have a bomb.
By the way your comparison to tnt isnt fair since petrol needs sufficient air (oxygen) to burn whereas tnt or gun powder etc.. has its own oxidization process. but that gallon of fuel in a big reservoir of compressed air = big SHIT!
On a final note : Petrol where i live (south africa ) is too expensive to do this with...lpg is readily available , far safer and cheaper...
@@hermanbotha1449 yes you are right but the comment I made is from the training I received from my job it's not made up.... I'm aware of the triangle fuel, ignition, and oxygen take one away and you are safe... if you have a gallon of gas sealed in the house during a fire what will happen when the pressure builds?
Engines can actually run on vapors... hydrogen gas can't unless it's tuned for it.... but add that to a small flow of gas and you will get an efficient burn... older model cars can have hydrogen fuel cells and increase gas mileage exponentially...
I bet it could weld steel considering the fact that gasoline burns faster and hotter than propane.
Would not be good for welding… too much oxidation, welds will turn out porous and weak. Just good for melting, heating and cutting
Mantap
What does the water do exactly?
It's a flame arrestor, you don't want the flame going back into the petrol and catching that on fire
Haora di como hacer el sopletito
is one bottle water? for backfire? you could mention that too right.
Back fire and filter of some water solubile hydrocarbons
gasoline mean petrol?
Everything is fine. But there is one drawback, don't do this again. Where there is gasoline in the bottle, place metal shavings or steel wool to prevent the gasoline from foaming. Foam is dangerous and can suck fire inside and there will be a fire or explosion, and pouring too little gasoline is too much
Why don't you talk to your veiwer's while you do what you do???
At first, I was nervous, what was gasoline? I only know petrol, carosine and diesel. Now I know, petrol and gasoline are siblings. Just don't know, which one is his brother or sister 😁😂🤣.
they are the same thing
How to book an appointment with a plastic surgeon🙂💔💥💥
بانزين ماء
What tempreture please, looking to weld 1mm mild steel
Around 1950°C
👍🏿👌
ایا مهمار
Bhi gas gijer chalao
Cairan dalam botol apa aja tu bang??
Petrol ⛽️
yo vi hb
System jet hand
Iron man Boot
Gasoline is nothing but Petrol in India....OK ?
Yes
Yeah? People call it Gasoline in the USA and Petrol in the rest of the world.
At first, I was nervous, what was gasoline? I only know petrol, carosine and diesel. Now I know, gasolie and petrol are siblings. Just don't know, which one is his brother or sister 😁😂🤣.
Yes bro it will be fine
Jaise gangadhar hi shaktiman hai , vaise hi gasoline hi petrol hai
power source? and can you actually weld with gasoline/air without getting brittle welds that break apart?
thx for love but how about answering the questions?
@@ARCSTREAMSthis ones are mostly for heating, for welding you'll need acetylene, try looking for one of these that works with hydrogen, it could do something
you mean hho for welding?@@mauricioalpizarrodriguez9078
@@mauricioalpizarrodriguez9078 no good as replacement for argon gas
so far only acetylene can weld steel , all others ruin it
Ko
.
M
Hahahaha no🧠
The mosfet circuit is idiotic
How do you suggest that it can be done properly? Can you send a link to a video or schematic?
At least there should be a diode in parallel with the motor for protection
এটা খুবই ভয়ানক বাড়িতে চেষ্টা করবেন না
Back fire chanse
Dumb ways to die...
So many dumb ways to die....
😊
Fake 😂😂😂
Nonsense and fakes are not acceptable at all 🤥💥🍅🍃💥🩴