Loose the deans plug for a xt90 or similar. Your main issue IMO is, it is way too cold. Lipo's can't discharge large amounts of current in cold temperatures.
Despite all the #'s that were ran, this is just one more example of how Amazing the Traxxas Valineon System really is! (IMHO). I currently own some 'nice' Brushless systems, but usually default back to the VXL system for my 1/10 scale bashers. Even in non Traxxas vehicles! I know lots of people have had failures or burnt up VXL stuff, but a $10 temp gun, correct gearing, a strong motor fan go a Really Long Way! Not to mention giving the vehicle a cool down break here and there, but I know the last one is Really hard to do!
Yeah most people don’t wanna wait for the system to cool down. The VXL system has been pretty darn reliable for me. I don’t think it’s the best choice when gearing up though.
When in doubt over power it and that's the best thing..the slash platform will take it.. besides the cv shafts and the center drive shaft.. everything else will take the power.. I run 8s on mine alot
With the wheel hexes being bigger and larger rims and probably heavier denser tired you added more rotating mass and different contact patches witch would cause resistance
Cool to see your road to 100mph, im also currently building up a slash 4x4 to try join the 100mph club. A few things i did differently is using xt90 connectors to handle the voltage and a HW 3200 combo as a starting point for my electronics. Unfortuanately up here in the frozen north will be a few months yet before i can test and run the build Im looking forward to seeing your journey
Smaller tires equal lower speed and more pulling power,taller tires equal higher speed less pulling power tires are just another gearessentially. essential
Buddy, trenchers are not belted so when go 30-40 mph+ they balloon effectively increasing your top speed , with the belted tires this doesnt happen because they dont ballon
Time for a heated lipos bag. It's crazy how much difference it makes. Even if you have to keep it on you heater vent in the car but don't let it sit out while talking, it will get cold fast.
Loved the video can’t wait to see the slash get pushed to the absolute limit but I really want an 🤜rc knockout🤛 sticker to slap on my rc. You should totally make some kind of merchandise I would definitely buy
Niiiiccce and I also love how you respond to comments like this keep up the great work if you made something like stickers or something that would be absolutely epic and I would definitely buy. personally I think the hoss is better but that just what puts the biggest smile on my face 😂 and I guess it’s different for you
Yeah man, you need more volts! Not bigger pinion. You need two 3s my bud for 6s. What's your final ratio right now ? And your right about the tires, your other ones were ballooning at speed which increased your mph but the car will become more unstable as the speed increases.
I don’t wanna share gear ratio right now. It’ll give away too much information for future videos. Let’s just say more volts may have been applied and maybe the gearing has changed since then as well lol 🤔😂
@@RCKnockout excited to see what speeds you get. But yeah use some sort of gearing app and put in a voltage that takes in effect drop you see under load.
You got 48.2 mph becoz, these dboot wheels are of a less diameter. So per revolution the distance travelled is less, thus speed is less. It needs a substantial amount of gearing up, if you are using this motor. If you use a motor of a higher kv , you may not need to increase the gearing that much.
Hey man I don't know if you figured it out yet but I think some of your communication issues you are having in this video are due to your connectors gitting wet from the snow. I had the same issue, swapped out my servo, and then eventually swapped out ESC. Came to find out as soon as my plug's got wet that's when the issue occurred
I didn't read all comments but your bigger tires are gonna have an affect on your speed. Is just like changing your gearing. For better or worse. Plus maybe they are heavier wheel and tires?
taller rolling tire mass slow it down i use xt90 on all my cars alot better then deans and more gearing ebay has a mount that u can mount above the spur for a large pinion gear
Those Wheels may weigh more than your last set, sounds like You have a tight gear mesh, and if you're looking for top speed gear up four or five teeth on your pinion.
Remember I told you before you gonna loss speed on belted 😂. Gear up and used a 6s. I do also speed run before on my 3s vxl got a top speed 67 on 21/54 on a stock tire but on belted i loss almost 10 miles
Yeah this was filmed over a month ago. So most of the things people tell me don’t actually apply cause I’m multiple videos ahead. You’re definitely right though. I was super surprised by how much speed was lost though
I would try a pinion which is 4-5 theeth bigger if you want to run 4s. But the connectors pls no Xt90 is the way to go. Maybe the esc having a hard time pulling the current threw the little connector. Definitely you have to upgrade that connector A smaller spur gear will fit
Thanks for the tips. This video isn’t real time though. This was probably filmed a month ago. Real-time I’m going to be filming episode 11....Let’s just say 4s isn’t gonna cut it and we’re going way larger than 4-5 teeth bigger. Lol 😂..Stay tuned 👍😉
@@RCKnockout Yes. The SMC is used by some people I seen running very fast. The CNHL is what I use, I'm not fast but the lipo is awesome, and Innovation RC uses them. Definitely check them out.
@@RCKnockout The #CNHL is up to 120C and my 2s and 3s where around $35-45. It has Burst rate of 240C. You may want higher mAh...idk.....they have higher mAh with less Discharge....and less mAh and also less mAh....their budget series but still pretty good. I think SMC also has 120C. but not positive and they have the V2 Extreme that is Graphene and would be the choice of most from SMC. They have the DV series as well, IDK anything about them yet though. Brock Diesel will be reviewing them soon.
Hey rc knock out have you also tryed the beginner power setting I have noticed on 3 s not much speed difference but more control so that car on 4 s the hit power on launch should be better then give more power from there the blue tooth settings throttle some times less is more for arrodanimacs your going for top speed not drag race it should help to slow the power increase to max with out flip also gearing is not right
Do you have a hobbywing programming card?? It defiantly woke my ECS up... My problem now is all the power wants to go to the front wheels..... fixed center diff comes in tomorrow!
Yeah I’ve done a video on the hobbywing program card actually. I haven’t hooked it took this esc though. Throttle Punch and Braking Force are the main things that can be adjusted. There is only a few different programmable features available for the Redcat Esc. Nice! You’re putting a center diff in your slash?
@@RCKnockout Yea I didn't know the screws were under the receiver box lol. But yea it fit right in, only to find out that the VXL 4s does not fit on the Slash 4x4 Ultimate lcg lol.
@@jerridmiranda9557 no worries….3.8 are monster truck size tires….I’d definitely have to cut the body a ton and have wheel extenders to have any chance for them to fit on a Slash…..most Traxxas Slash “Monster Truck” Builds run 2.8s which is about the largest tire that will fit under the body….the body mounts also will have to be lifted to clear those tires
tbh no hate but im slash 4wd stock with a traxas 3 cell can do the same speed if not faster. try the pinion and spur change. then i would go from there... not much more at that point.
I'm 3 years late but your tires are not I stalled correctly. There directional and are supposed to go on all in the same direction. Each 2 pack comes with one each of left and right so you need to buy 4 at all times kinda lame but ehhh
In some ways I feel like more weight might be more beneficial because one of the issues with the slash is the parachute/sail effect especially once you get going over 50mph
🤔 You are running a 1/8 scale motor/esc in a 1/10 car it goes with 6s power not 3s or 4s. I have the first generation erevo Vxl 6s system in my slash and if it had wings it would definitely take off , can’t keep it planted.
@@RCKnockout It may, I hope it does! That would be awesome. You have it pretty smooth. Great passes you did there. Even with losing the speed. That thing is moving.
@@RCKnockout have you seen HardCore RC? He is getting the Big Rock to 100 mph! I know he has been past 75 mph. It can be done. You will get it. Enjoy the process and have fun.
@@RCKnockout no ive ran it next to my car and before I hit 80mph it had flipped over and I do want to buy the go’s recorder but it’s a bit out of my pocket as of right now I will eventually do a video on my upgrades and such :D
Cold conditions effecting the battery and servo and ur gun
Loose the deans plug for a xt90 or similar. Your main issue IMO is, it is way too cold. Lipo's can't discharge large amounts of current in cold temperatures.
And wit the wheel situation that is true it is almost like a gear reduction because the wheels are smaller
Despite all the #'s that were ran, this is just one more example of how Amazing the Traxxas Valineon System really is! (IMHO). I currently own some 'nice' Brushless systems, but usually default back to the VXL system for my 1/10 scale bashers. Even in non Traxxas vehicles! I know lots of people have had failures or burnt up VXL stuff, but a $10 temp gun, correct gearing, a strong motor fan go a Really Long Way! Not to mention giving the vehicle a cool down break here and there, but I know the last one is Really hard to do!
Yeah most people don’t wanna wait for the system to cool down. The VXL system has been pretty darn reliable for me. I don’t think it’s the best choice when gearing up though.
All my vxl systems have been good except my vxl8s esc it went bad on day 26 so traxxas sent me a new one and I sold it for a max6 lol
Even when i was a child I couldn't break the vxl3s lol they are bulletproof
Out of the box that thing comes blazing hot…
You should try running 8s in it on a 8 scale motor because a 8 scale motor was the biggest motor i got to fit in mine
Lol. Jump from 4s to 8s? I like the way you think! 👍😉
When in doubt over power it and that's the best thing..the slash platform will take it.. besides the cv shafts and the center drive shaft.. everything else will take the power.. I run 8s on mine alot
@@tonycope8155 do you bash yours on 8s or mainly do on road driving?
@@RCKnockout I bash the truck on 8s
@@tonycope8155 surprising that it holds up to that. What gearing do you run?
Slightly smaller tires will effect your top speed. I think I would look for a different road too, that cement looks kinda rough
Yeah I have a different road and a completely different setup now
With the wheel hexes being bigger and larger rims and probably heavier denser tired you added more rotating mass and different contact patches witch would cause resistance
The tires are denser but I think the rotating mass is still probably less than with the trenchers
@@RCKnockout I see, maybe a slight difference in diameter? It was only a few mph difference,
@@calebsweeney8203 I lost 9mph so that’s more than a few mph lol 😂
awesome man its really cool to see all the different results
Thanks! 😉
Warm up the tires the roads ice cold...pre warm up..bring a 2s in hand before putting on the fresh pack
I think the temps were working against me quite a bit. I’m looking forward to more mild weather.
Cool to see your road to 100mph, im also currently building up a slash 4x4 to try join the 100mph club. A few things i did differently is using xt90 connectors to handle the voltage and a HW 3200 combo as a starting point for my electronics. Unfortuanately up here in the frozen north will be a few months yet before i can test and run the build
Im looking forward to seeing your journey
Thanks. The weather isn’t that great here either lol 😂....good luck with your build and quest to 100mph! 😉
Also take the side bumpers off. They extra weight
Keep trying you'll get it good luck👍😁
Thanks. That’s definitely the goal!
Dang... wish I could help. Definitely will be many more upgrades. Good luck 👍
Thanks! Yeah a lot more upgrades and mods to come
EPIC Tires
Gear up & 100c lipo or higher but dont leave out your front spoiler you will need to create a lot of down force running that body at 100 mph..
Thanks for the tip!
Smaller tires equal lower speed and more pulling power,taller tires equal higher speed less pulling power tires are just another gearessentially. essential
Makes sense…more torque with smaller tires…more top speed with larger tires
Looking awesome
Thanks!
Buddy, trenchers are not belted so when go 30-40 mph+ they balloon effectively increasing your top speed , with the belted tires this doesnt happen because they dont ballon
Exactly right
Time for a heated lipos bag. It's crazy how much difference it makes. Even if you have to keep it on you heater vent in the car but don't let it sit out while talking, it will get cold fast.
Never heard of a Lipo heater bag?
@@RCKnockout yep we use them for fpv in the winter. Check into it. Fill Lipos can seem like a dead lipo in cold weather. Even if though it isn't dead
@@RCKnockout I believe it's hobby king that makes 1 of the heaters that you power with a lipo.
@@RCKnockout I just use hand warmers In my pocket up against whatever lipo I'm about to use. It work way better if its close to 90degree
@@Reecefpv so I use a lipo to power the heater to heat the lipo? Lol
Loved the video can’t wait to see the slash get pushed to the absolute limit but I really want an 🤜rc knockout🤛 sticker to slap on my rc. You should totally make some kind of merchandise I would definitely buy
And quick question is the slash ur favorite rc cuz u seem to run it a lot
Another viewer asked me the same question about the stickers. I guess I didn’t realize there was a market for them. I’ll have to look into it
@@wyattuitermarkt5608 I think it’s my most reliable brushless rig. Most fun probably goes to the Xmaxx most of the time anyway lol 😂
Niiiiccce and I also love how you respond to comments like this keep up the great work if you made something like stickers or something that would be absolutely epic and I would definitely buy. personally I think the hoss is better but that just what puts the biggest smile on my face 😂 and I guess it’s different for you
@@wyattuitermarkt5608 I try my best to. So your favorite is the Hoss over the Slash?
the cold weather can affect the battery
Yeah it definitely does
Just getting back to your videos after a long break from the hobby. Starting where I left off. 😅 I’m late guessing but uour lipo’s are too cold.
Glad to see you back! Very late to the party at this point…this was probably filmed 2 years ago…no worries though lol 😂
@@RCKnockout ha! I’ll continue watching for fun. I left running an infraction but I’m back with a vendetta. Just shy of 100mph myself.
@@FEboats nice man! Yeah I highly recommend you continue watching..still some cool videos left in the playlist
If the temps are low up the tooth of the pinion becuse you are runing smaller tyers
Thanks for the tip! I believe I’m running a 34t pinion on it now
Looks amazing bro
Thanks man!
nice job! big like! 👍👍👍
Thanks! 😉
Yeah man, you need more volts! Not bigger pinion. You need two 3s my bud for 6s. What's your final ratio right now ?
And your right about the tires, your other ones were ballooning at speed which increased your mph but the car will become more unstable as the speed increases.
I don’t wanna share gear ratio right now. It’ll give away too much information for future videos. Let’s just say more volts may have been applied and maybe the gearing has changed since then as well lol 🤔😂
@@RCKnockout excited to see what speeds you get. But yeah use some sort of gearing app and put in a voltage that takes in effect drop you see under load.
@@jetway1122 agreed. I think you’ll start seeing us go in the correct direction from here
You got 48.2 mph becoz, these dboot wheels are of a less diameter. So per revolution the distance travelled is less, thus speed is less. It needs a substantial amount of gearing up, if you are using this motor. If you use a motor of a higher kv , you may not need to increase the gearing that much.
Yeah you’re right! Ideally I wanna try to keep this motor in it so gearing it up is definitely a must in my mind
Use Velcro for the batteries
Looks good👍😄.
Thanks! 😉
Hey man I don't know if you figured it out yet but I think some of your communication issues you are having in this video are due to your connectors gitting wet from the snow. I had the same issue, swapped out my servo, and then eventually swapped out ESC. Came to find out as soon as my plug's got wet that's when the issue occurred
That might have been the case….I swapped this esc out quite a while ago though
I didn't read all comments but your bigger tires are gonna have an affect on your speed. Is just like changing your gearing. For better or worse. Plus maybe they are heavier wheel and tires?
All good points 😉
Nice looking rc
Thanks!
I run a 25 to pinon of 52 spur and I'm getting right at almost almost 55 to 60
Is that with the 3500kv motor?
Big pinion and smaller spur for speed with lower kv
Yeah I’m running a completely different power system and gears now
It's the tires you need to gear up because the tires don't balloon to get the higher gear from the tires
You’re absolutely right
Deans is rated for 60A, XT-90 has a rating of 90 Amps and EC5's are rated for up to 120 amps.
taller rolling tire mass slow it down i use xt90 on all my cars alot better then deans and more gearing ebay has a mount that u can mount above the spur for a large pinion gear
Lol. I’m about to film episode 11 now. I have made a lot of changes since this video was filmed. I’ve learned a lot
Fire , but yo your tires are on backwards those lil arrows on sidwall tell u
Those Wheels may weigh more than your last set, sounds like You have a tight gear mesh, and if you're looking for top speed gear up four or five teeth on your pinion.
I’ve changed the setup since this video…it’s completely different now…I’m geared up quite a bit with a different power system
Remember I told you before you gonna loss speed on belted 😂. Gear up and used a 6s. I do also speed run before on my 3s vxl got a top speed 67 on 21/54 on a stock tire but on belted i loss almost 10 miles
Yeah this was filmed over a month ago. So most of the things people tell me don’t actually apply cause I’m multiple videos ahead. You’re definitely right though. I was super surprised by how much speed was lost though
@@RCKnockout if you want more stable try proline flowtek body.
@@rcmtb1052 is it a short course body?
Yes it is
@@rcmtb1052 nice I’ll have to look into it!
I would try a pinion which is 4-5 theeth bigger if you want to run 4s.
But the connectors pls no
Xt90 is the way to go.
Maybe the esc having a hard time pulling the current threw the little connector. Definitely you have to upgrade that connector
A smaller spur gear will fit
Thanks for the tips. This video isn’t real time though. This was probably filmed a month ago. Real-time I’m going to be filming episode 11....Let’s just say 4s isn’t gonna cut it and we’re going way larger than 4-5 teeth bigger. Lol 😂..Stay tuned 👍😉
Gear it up
And if it's only 15° out those lipo batteries are not discharging at their normal rate
That’s a valid point
The driveshaft wobble on these cars is beyond crazy...traxxas needs to fix it
Gearing is probably what is holding you back because mine will do 70 on 3s with the same tires and similar electronics
Interesting. What gearing are you running?
Definitely Gear up and go to Bullets or IC5/EC5...That may help some. You will need a SMC or CNHL lipo.
I think you’re right about the connectors. Is SMC and CNHL Brands of batteries? I’m not familiar.
@@RCKnockout Yes. The SMC is used by some people I seen running very fast. The CNHL is what I use, I'm not fast but the lipo is awesome, and Innovation RC uses them. Definitely check them out.
@@rcpd3157 what kinda discharge rate are we talking? And how expensive are they?
@@RCKnockout The #CNHL is up to 120C and my 2s and 3s where around $35-45. It has Burst rate of 240C. You may want higher mAh...idk.....they have higher mAh with less Discharge....and less mAh and also less mAh....their budget series but still pretty good. I think SMC also has 120C. but not positive and they have the V2 Extreme that is Graphene and would be the choice of most from SMC. They have the DV series as well, IDK anything about them yet though. Brock Diesel will be reviewing them soon.
@@rcpd3157 that actually isn’t too bad of a price. What plugs are you running on yours?
My stock Vxl motor on a wp sct max 10 esc with a 3s 7000mah 100c battery will do more… I’ve gotten 76 mph before I melted the plastic motor mount
Congrats on 76mph
Maybe warm the battery some. Low temps will reduce output
Very true….probably wait for warmer weather to do speed runs
Hey rc knock out have you also tryed the beginner power setting I have noticed on 3 s not much speed difference but more control so that car on 4 s the hit power on launch should be better then give more power from there the blue tooth settings throttle some times less is more for arrodanimacs your going for top speed not drag race it should help to slow the power increase to max with out flip also gearing is not right
I’m not sure what you’re referring to? The throttle punch?
Do you have a hobbywing programming card?? It defiantly woke my ECS up... My problem now is all the power wants to go to the front wheels..... fixed center diff comes in tomorrow!
Yeah I’ve done a video on the hobbywing program card actually. I haven’t hooked it took this esc though. Throttle Punch and Braking Force are the main things that can be adjusted. There is only a few different programmable features available for the Redcat Esc.
Nice! You’re putting a center diff in your slash?
@@RCKnockout because its a rtr hobbywing esc it limits the adjustability on the esc.. u need a smaller spur gear and larger pinion
@@AVERAGEJOERC I agree that it definitely needs to be geared up! 😉
The trenches are way taller especially when they expand you need a bigger pinion wit those street tires lol
That’s true
Great video bro. Upgrades buddy.
Thanks! 👍😉
Im guessing you lost speed because the new tires arent swelling up like the old ones.
You might be right about that
You’ll need a different body to go 60+ or they just take off to the air
Yep like a sail
How did you mount that receiver box to the front like that?
Just screws right on
@@RCKnockout Yea I didn't know the screws were under the receiver box lol. But yea it fit right in, only to find out that the VXL 4s does not fit on the Slash 4x4 Ultimate lcg lol.
@@ZeuZLoD the VXL 4s out of the Traxxas Maxx?
@@RCKnockout Yessir! Switched to 6s on the Maxx and figured I would try to put the 4s into the Slash 4x4 Ultimate lcg.
@@ZeuZLoD yeah the 4s in the Maxx is a huge esc so that’s not surprising that it doesn’t fit lol…
Maybe you have to gear up for the hoons.... does looks cool
Yeah I did have to gear up quite a bit. That video was a few months ago so a lot has changed since then
The Deans connector isn’t helping. Not hurting that much either. The ridiculously long motor wires are really, really not helping and look silly.
Ive addressed all of those issues
Mine does 59 stock vxl and street tires
Nice! What gps do you use?
@@RCKnockout i use a radar gun
@@nolacross704 I gotcha
gearing bro!!!!! if its staying cool up the gearing
Yeah it’s been staying pretty cool….I’ve upped the gearing quite a bit since then
Tires look like 2.2 you should look up 3.8 they will give you a higher top end but put more stress on everything
These aren’t 2.2s…….they’re 1/8th scale 3.0s….3.8 not gonna fit under the body either
@@RCKnockout do the 3.8 hit your body? And my bad for all theses questions and statements
@@jerridmiranda9557 no worries….3.8 are monster truck size tires….I’d definitely have to cut the body a ton and have wheel extenders to have any chance for them to fit on a Slash…..most Traxxas Slash “Monster Truck” Builds run 2.8s which is about the largest tire that will fit under the body….the body mounts also will have to be lifted to clear those tires
@@RCKnockout thanks for all the info I will check to see if I'm running 2.8 I haven't messed with my rc for about 8 months
Can you run a dubble motor/ esc
what size are the tires????!??
2.9
Where did u get the wheel at
eBay…..dboot Hoons
What tires exactly?
Dboot Hoons 2.9
Gear up. / Tire size
which hoons did you put on? the 2.9 ones?
Yeah
tbh no hate but im slash 4wd stock with a traxas 3 cell can do the same speed if not faster. try the pinion and spur change. then i would go from there... not much more at that point.
Yeah it’s slower than with the high speed gearing actually. I’ve done a lot of changes. Stay tuned 😉
Gearing and motor kv
You probably have to lower it somehow so its lower so its gonna be better
Yeah lowering it probably wouldn’t be a bad idea
I'm 3 years late but your tires are not I stalled correctly. There directional and are supposed to go on all in the same direction. Each 2 pack comes with one each of left and right so you need to buy 4 at all times kinda lame but ehhh
I’d say weight reduction take things that are heaven and change it for lighter parts hell the battery is the heaviest thing on the car
In some ways I feel like more weight might be more beneficial because one of the issues with the slash is the parachute/sail effect especially once you get going over 50mph
The tires are a gear to.
For sure! 👍😉
It's your gearing
🤔 You are running a 1/8 scale motor/esc in a 1/10 car it goes with 6s power not 3s or 4s. I have the first generation erevo Vxl 6s system in my slash and if it had wings it would definitely take off , can’t keep it planted.
Yeah it’s hard to keep it grounded
It’s your tires
Better to volt up then gear up!
I think both means “more speed” lol 😂
what Hex-Adapters do you use?
The Traxxas 17mm
What kind of motor you got in there?
2200kv axial vanguard
Is it 3s also what is the gearing sour and pinon
I can’t remember what it was in this video….I believe I was running 4s in this video though
@@RCKnockout ah cause I wanna get my slash converting to drag slash to do 80 on 3s
@@mbfishing3807 yeah this was 4s…..I’m not sure what gearing you’d need?
@@RCKnockout ye idk
It be tires
It’s concerning that you needed a calculator to do 15x2200 💀
Need a new motor
I think the motor will get me to 100mph
You need different gearing
What tire are thoose
2.9 Arrma DBoot Hoons
@@RCKnockoutthank you
Are these fine for street use
@@Its_Slayer81 yeah
Get something above 3200kv for sure....maybe 2800kv...just depends I guess....on 4s
I think this motor can get me to 100mph. At least I’m pretty sure 🤔
@@RCKnockout It may, I hope it does! That would be awesome. You have it pretty smooth. Great passes you did there. Even with losing the speed. That thing is moving.
@@rcpd3157 thanks! I appreciate the encouragement! 👍😉
@@RCKnockout have you seen HardCore RC? He is getting the Big Rock to 100 mph! I know he has been past 75 mph. It can be done. You will get it. Enjoy the process and have fun.
@@rcpd3157 I don’t think I have. I’ll have to check out his channel thanks!
If tires ballon thats increases top speed
Yeah I’m very surprised it cost us 9mph though
Your gear is still so cold, you could be more aggressive with your gearing
Gear it higher?
LOL i feel bad for u bro I’m runnin like 75mph+ with a velineon brushless on a 2wd with a 3s 😂 try another pin gear
Lol. You’re right. Do you got the 75mph gps recorded? It’s not easy to get a Slash to 75mph
@@RCKnockout no ive ran it next to my car and before I hit 80mph it had flipped over and I do want to buy the go’s recorder but it’s a bit out of my pocket as of right now I will eventually do a video on my upgrades and such :D
@@sk1p.b was that with the stock slash body on?
Yeah u just need way higher gearing
Cause the motor u have rn is rated for more torque compared to the velinion motor
@@jaysonflores3610 you’re right for sure! 😉
Lipid too cold
Yeah that might have been the case
You lost speed because those tires don't baloon
i think bad esc
Lots of contributing factors I think 🤔
LOL it goes faster stock😭💀, you need 8s and a better connector system like xt60
I don’t think xt60 is gonna cut it. You’re right I was pretty disappointed by the speeds I got
Xt 60 will be fine if it’s through 2 connectors haha, they can handle 6s on one
@@jrc-fabs1634 xt90 would probably be a better option for that amount of voltage though
Xt90's would be way better they run 90amps continuous and the xt60 are only 60 amp continuous
@@Todd_G_FPV I’ve gone beyond that lol 😂
Click bait video
It’s a series to get to 100mph. Obviously I’ve got a ways to go but it’s not clickbait lol 😂