@@Frost_Glitch2.0 the full saber has a lot more than the seven sword g, including the combined forms this had 13 weapons (6 bits, gn sword, gn buster sword, 1 katar, 3 dagger, and the full saber)
I have had a lot of fun building this particular kit; especially as one who casually constructs them. I work nights. So, I really only work on them at roughly 4 a.m. to unwind. It is rock solid, and a great addition to my collections. I enjoy your commentary and follow your recommendations. Thanks, breh.
The new logo and Bandai Spirits is because Bandai split their divisions into two. The Blue Bandai Spirits division is going to make figures and kits more aimed at adult audiences, while the standard Red Bandai division is going to make gashapon and shokugan more aimed at kids. Essentially, Red = Kids, Blue = Adults.
I was really reluctant to get hyped or interested on this "re-issue" of the Quata, since.Quanta is one of my liked suits from 00, but when I saw the new back pack for the new saber attachment, and man, the new GN Saber is this good? I can't pass this! Love that sexy v-fin though. Better than the chunky old version.
How about some retro reviews while waiting for new kits? You have stuff like Sazabi Ver Ka and RG Mk. II etc that could use a MechaGaikotsu review and grade! Great review as always!
The bottom bit on the backpack part of the GN Drive Can be modded to stay in better. Basically cut off the thinner leg offshoot thing (that prevents the backpack from going all the way on) and you should be golden. Did that with mine and I had no issues with the backpack falling off afterwords, and it slides all the way in like a charm. No glue needed.
Older molds tend to have more mold lines because the mold has worn out more. The new molds of today will start getting mold lines in a few rounds of reprints.
if you have gundam markers, like the metallic set, grab the blue pen..dont shake it(you dont want the metallic flecks for this)and run the ink over where the sprues were attached, where its discolored, then wipe clean with a kleenex. boom. stress marks ALOT less obvious.
this method can be applied to other colors of plastic but its my recommendation to color test using the part sprues as the testing surface, to determine the correct paint marker to use.
You can get rid of stress marks easily actually. Jus dab a little extra thin cemen on the white marks, let dry for a couple of hours, and then sand it. The white mark will disappear.
this was the first gundam I got (the original mg though) and I was fairly young so I had no clue what I was doing. but now a few years later I really wanna get this kit and build it again
This review is so much better than the one zakuaurelius did. Mecha Gaikotsu does so much justice to how good this kit really is. Zakuaurelius even did the cockpit hatch opening wrong, missed out on the adjustable hip joints, gave wrong info on the right arm armor, All zaku and his viewers did was complain on the weapons design, how dangerously sharp they are, and the proportion. (The proportion? Seriously? MG and RG have the best proportions) That's UC elitists for ya.
I never understood UC elitist, AU is pretty great, Barbatos,00 raiser and quanta gundam were my favourite. While in the UC, RX 78-2, NU and unicorn were my picks.
@@ianramos905 I agree with you. I guest UC elitists can't have and acknowledge good things. All while blindly accepting all the bad things about UC with such pride.
I wanted to buy this in the black Friday winter sale, but the postage was £30 when the kit was £28. The original Qan t had £10 postage price, so the extra sword in the Full Saber makes the box big enough for expensive shipping. So I'm just getting the original.
Bandai split into 2, the red logo is bandai, and the blue logo is bandai spirits , bandai is focused on kids toy, and bandai spirits is focused on model kits
So the blue logo represents all their products meant for an older audience and collectors. The blue logo also signifies Bandai collectors level quality. If you look at the latest Super Sentai and Kamen Rider toys, the logo is still red.
Well, why bandai just don't make like an expansion for the full saber. If like this, that's just like we have to buy mg OO Quanta twice. BTW mecha, can you please review an hg gundam F91? I want to know what you think about it? And thanks for your review of this OO Quanta dude, I hope you always in success!...😉😉😉
Long story short bandai did some internal restructuring in regards to gunpla, merging some departments. Because of this, all gunpla from now on will have a blue bandai logo to show its a model kit from bandai. This means nothing to the consumer other than logo is blue instead of red
The blue logo is symbolic to all people that Bandai want to join venture with EA so after wipe out all bootleg, they gonna rise up price and make all P-Bandai. #forjokeonly
I actually quite like the old movable MG hands rather than those exchangeable fingers. In facts, those movable hand are the reason why I choose to purchase MG rather than HG.
Those hands are shit and cant hold anything heavier than beam saber. People constantly complaints about 3.0 hands too. Those fixed hand is the best choice.
I've had this kit for 3 months, and I gotta be completely honest, it's genuinely one of the worst things I've ever bought with my own money. It's possible mine's defective, but with how many people report issues and how many don't, totalling to about a 50/50 split, it seems to be a quality control problem more than anything else. The joints are hopelessly loose, the weight makes it almost impossible to pose without assistance (of which the stand only partially offers, it's genuinely not enough), armor constantly falls apart, I've even had one piece break from how many times it's come apart and I've had to reassemble it - and it's a joint, not on the main unit but on a blade bit, so some minor intended functionality is now permanently gone. $70, down the drain.
Got this kit for Christmas, and I DO love it (after some functionality modifications) but is there ANY way to get fixed posing/holding hands? It’s the biggest thing holding this kit back
Honestly I love the full saber version of 00 quanta, in fact the RG version might be my first p-Bandai Kit ^^ especially if I can use the gn sword 4 with a build custom I have planned ^^
Mecha gaikotsu-san! What do you think when comparing RG quant and MG quant full saber( whithout GN sword IV ). I plan to buy one of them in the new year. which one do you think I should buy? In my my gunpla group in vietnam, everyone suggested that I should buy MG quant full saber because the body ratio of the MG version is nicer than the the RG version. And in fact, I also prefer the mono eyes design of MG( It look so damn cool). But I prefer gunpla with scale 1/144 rather than scale 1/100( for convenience of display and the price is quite cheap for me). What should I buy? please give me some advice, mecha gaikotsu-san. Thank you so much!
I got the hg epyon for Christmas. I was tempted to put it out of its misery. But I glued some stuff and tightened up the joints and no It's better butt now by a whole lot
The blue logo Means its a new Bandai Production Old bandai Logo is Old product New bandai logo is new product Old bandai = old Product Old Texture New bandai = New product new texture Bandai spirits = Rock solid
Can you make the original backpack? I picked this bad boy up while on vacation and gotta say one of the best master grades I've built. I just bought a second one this week and I'm gotta paint and customize it while hopefully having this sit next to my customized mg Barbatos on my window sil.
would be nice if they sold the GN Sword IV Full Saber as a standalone option unit or something so that people who already own the 00 Qan[T] don't have to shell out the price of a full MG kit for it
hi MG, do you plan to review the Diver Nami? :) I'm really looking forward to that because it seems that this kit is waaaaaaaay better than the satan fumina
![CUSTOM BUILD GUNPLA | MG 00 QAN[T] FULL SABER | 00 SERIES STORY EP 04](http://i.ytimg.com/vi/IKaNJlIgEjE/mqdefault.jpg)
![1772 - MG 00 Qan[t] Full Saber (OOB Review)](/img/n.gif)
Celestial Being: How many weapon does Setsuna want to put into this Gundam?
Setsuna F. Seiei: Yes!
Both the seven sword/g and the qan[t] full saber
@@Frost_Glitch2.0 the full saber has a lot more than the seven sword g, including the combined forms this had 13 weapons (6 bits, gn sword, gn buster sword, 1 katar, 3 dagger, and the full saber)
*Looks at my 00 XN Raiser Seven Sword G*
@@notrod0918 but can it stand without support stand?
Funny how the new v fin makes a huge difference , before i hated the mg quanta head but now it just looks so sleek and on point
Steffey ‘on point’ unintentional pun?
Ya it does
What is v fin
@@_-_-936 the antenna section that looks like a v is usually called v fin
@@_-_-936 it's a antenna for communication if you're out of range with teammate
I have had a lot of fun building this particular kit; especially as one who casually constructs them. I work nights. So, I really only work on them at roughly 4 a.m. to unwind. It is rock solid, and a great addition to my collections. I enjoy your commentary and follow your recommendations. Thanks, breh.
The new logo and Bandai Spirits is because Bandai split their divisions into two. The Blue Bandai Spirits division is going to make figures and kits more aimed at adult audiences, while the standard Red Bandai division is going to make gashapon and shokugan more aimed at kids.
Essentially, Red = Kids, Blue = Adults.
thx for the explanation
cause BLUE is for adults only 😏
thx
Neat
Then, any new star wars kit with blue logo ?
just finished building my 10 years old MG-OO QanT that I forgot I bought it since grade 6...dammm this thing still amaze me how cool it is
Look can we just appreciate the people that made the box art I mean that looks soo good!
Okay, Bandai, we all love huge-ass swords. MAKE TOUGHER JOINTS GODDAMIT
For a kit that came out just 2 years ago, it was the hardest to find available for a reasonable price. Of all places, Barnes & Nobel came through.
I was really reluctant to get hyped or interested on this "re-issue" of the Quata, since.Quanta is one of my liked suits from 00, but when I saw the new back pack for the new saber attachment, and man, the new GN Saber is this good? I can't pass this! Love that sexy v-fin though. Better than the chunky old version.
How about some retro reviews while waiting for new kits? You have stuff like Sazabi Ver Ka and RG Mk. II etc that could use a MechaGaikotsu review and grade! Great review as always!
JJ Jacinto That is a great idea! Let's get this to top comment everyone
I like the idea, he can call it Retrogaikotsu
The bottom bit on the backpack part of the GN Drive Can be modded to stay in better. Basically cut off the thinner leg offshoot thing (that prevents the backpack from going all the way on) and you should be golden. Did that with mine and I had no issues with the backpack falling off afterwords, and it slides all the way in like a charm. No glue needed.
Thanks, this worked when I recently built mine
You’re my hero, I was about to buy abs cement and seal it in forever
"a couple of dodgy wing high grades"...oof know those feels from way back.
Older molds tend to have more mold lines because the mold has worn out more. The new molds of today will start getting mold lines in a few rounds of reprints.
0:04 why do I hear "COOONDOOOOM"
I hear QUUUUAAAANNNTAAAAA
Thank you. Sincerely.
You made my life better.
or maybe Garuda!
Or GUUUUUUUNNNNNNNNNDDDDDDDDAAAAAAMMMMMM
CORROOONNAAA
I just got this kit from my gf for my birthday and I cant wait till I'm finished
6:20 Draw me like your French girls.
if you have gundam markers, like the metallic set, grab the blue pen..dont shake it(you dont want the metallic flecks for this)and run the ink over where the sprues were attached, where its discolored, then wipe clean with a kleenex. boom. stress marks ALOT less obvious.
this method can be applied to other colors of plastic but its my recommendation to color test using the part sprues as the testing surface, to determine the correct paint marker to use.
You can get rid of stress marks easily actually. Jus dab a little extra thin cemen on the white marks, let dry for a couple of hours, and then sand it. The white mark will disappear.
he's right..I've done that too. either method will work.
XRaiderV1 Thanks!
gerardray123 Thank you too, nice to hear they're more ways to remove nubmarks.
i'm so sorry gaikotsu. i havn't watched any of your videos for months. i have fallen out of the hobby for a bit but this is bringing me back!
Who's here now at 2023 waiting for Exia 2.0?
'24
Make that 2024.
😂😂😂😂😂@@seanjaymacabales6587
Just get the PG
Why the fuck we ain't got one yet is irritating.
I was startled when Setsunas screamed "Gundam!" through eye sockets at the beginning.
6:40 I did that with my good old MG 2.0 Gundam once. I got it smashed into oblivion.
It's blue because it's a new bandai brand. More like a sub brand.
this was the first gundam I got (the original mg though) and I was fairly young so I had no clue what I was doing. but now a few years later I really wanna get this kit and build it again
My first gunpla is the SDCS -0 RX gundam unicorn(they're terrible)and the 2nd is the HG earthree gundam and 3rd is mg 00 qan t (standard/original)
Man, I want this! I had gotten the P-Bandai RG kit of this, but having it in a larger scale would be awesome too.
after bandai killed his enemy (dragon momoko & daban), he got a change and evolution.. the blue logo
Hoping this kit gets the refresh it deserves with the excellent Virtue, Dyanemous, and Kyrios master grades.
Huh?
@@shumijin528 he's saying that this kit should get a 2.0 version. This "2018" model is literally just the 2010 kit with the weapon.
6:40 u guys saw it hahahahahhahah
why is gundam 00 just the best gundam series
I wish they'd release an "0 Gundam" in master grade!
Finally i've been waiting for this reveiw since you post this kit in your ig
Been debating pickin this up but you convinced me!
My favorite gundam!
GNT-0000/FS 00 Qan[T] Full Saber.
One of the most powerful gundams even until now.
This review is so much better than the one zakuaurelius did. Mecha Gaikotsu does so much justice to how good this kit really is.
Zakuaurelius even did the cockpit hatch opening wrong, missed out on the adjustable hip joints, gave wrong info on the right arm armor,
All zaku and his viewers did was complain on the weapons design, how dangerously sharp they are, and the proportion. (The proportion? Seriously? MG and RG have the best proportions)
That's UC elitists for ya.
I never understood UC elitist, AU is pretty great, Barbatos,00 raiser and quanta gundam were my favourite. While in the UC, RX 78-2, NU and unicorn were my picks.
@@ianramos905 I agree with you. I guest UC elitists can't have and acknowledge good things. All while blindly accepting all the bad things about UC with such pride.
I might be getting this on Monday from my local comic shop. They have one for $50 never been opened.
The Qan[T] gundam can best be described as the cloud strife of the gundam universe!
This gundam just showed up at my job today and I remembered you reviewed it but watching it again seals the deal for me
Are you gonna review the Avalanche Exia Dash P Bandai kit?
Awesome!! Saw this on ur ig and I was waiting for it.... Keep up the good work!
Full saber = buster sword 2.0
@@cocobill0077 How it is even related to above post?
About to buy this kit to paint. Good to know this is an over all solid kit, minus that loose backpack
I wish more of the 00 MS would have gotten the MG treatment
I wanted to buy this in the black Friday winter sale, but the postage was £30 when the kit was £28. The original Qan t had £10 postage price, so the extra sword in the Full Saber makes the box big enough for expensive shipping. So I'm just getting the original.
already got this kit. damn im so lucky
Just bought this for $48 on sale at a bookstore glad i got this MG
I see that gundam and i hear "daybreaks bell" in my head.
Btw did you know?
Gundam TTRPG 5.0 EXISTS!!!!!
I love swords so this will be the master grade for me one day 😇😇.
Kind Regards AuraKnight
I like the original MG Quanta enough to actually be willing to get another in this form.
finally it can go into gun mode
almost all bootlegs don't know this
Waiting for the best gundam of 2018 from him
This is going to look great next to my Exia R3 and OO XN Raiser
6:46 < I heard as “it CURRY so much” hahaha
Bandai split into 2, the red logo is bandai, and the blue logo is bandai spirits , bandai is focused on kids toy, and bandai spirits is focused on model kits
So the blue logo represents all their products meant for an older audience and collectors. The blue logo also signifies Bandai collectors level quality. If you look at the latest Super Sentai and Kamen Rider toys, the logo is still red.
Well, why bandai just don't make like an expansion for the full saber. If like this, that's just like we have to buy mg OO Quanta twice. BTW mecha, can you please review an hg gundam F91? I want to know what you think about it? And thanks for your review of this OO Quanta dude, I hope you always in success!...😉😉😉
The quanta will always be special to me cause my first gunpla was a high grade
God damn them darn mold lines!
They got an internal rebranding. Basically they moved/merged all the plamo department to/with another one of theirs.
im glad watching this because i have this in my backlog🤔
my 1st exia ever in my stash too
“I forgot how good the 00 Master Grades are,” - And other than the GN-X, all we have been having are Setsuna’s suits. -_-
Can't wait till bandit makes a pg Quan[t]
that Tracer victory pose though.
Can’t wait to build mine!
i bought this today thanks to your review
Long story short bandai did some internal restructuring in regards to gunpla, merging some departments. Because of this, all gunpla from now on will have a blue bandai logo to show its a model kit from bandai. This means nothing to the consumer other than logo is blue instead of red
i got a RG Q[T] Full-Saber p-bandai before the MG shows up. When the MG shows up, i was like "Bandai, Why !!!"
The blue logo is symbolic to all people that Bandai want to join venture with EA so after wipe out all bootleg, they gonna rise up price and make all P-Bandai. #forjokeonly
now for the dynames to come out
YES A REVIEW FOR 00 QUAN[T] FULL SABER AND FROM A GOOD UTUBER LOL
I actually quite like the old movable MG hands rather than those exchangeable fingers. In facts, those movable hand are the reason why I choose to purchase MG rather than HG.
Those hands are shit and cant hold anything heavier than beam saber. People constantly complaints about 3.0 hands too. Those fixed hand is the best choice.
I've had this kit for 3 months, and I gotta be completely honest, it's genuinely one of the worst things I've ever bought with my own money. It's possible mine's defective, but with how many people report issues and how many don't, totalling to about a 50/50 split, it seems to be a quality control problem more than anything else. The joints are hopelessly loose, the weight makes it almost impossible to pose without assistance (of which the stand only partially offers, it's genuinely not enough), armor constantly falls apart, I've even had one piece break from how many times it's come apart and I've had to reassemble it - and it's a joint, not on the main unit but on a blade bit, so some minor intended functionality is now permanently gone. $70, down the drain.
if the backpack and full saber is fine then just get a regular qant
Got this kit for Christmas, and I DO love it (after some functionality modifications) but is there ANY way to get fixed posing/holding hands? It’s the biggest thing holding this kit back
I just bought a re-released devil gundam with a bandai spirits logo instead of the normal bandai logo. Think of it as a sister company
what so funny thing in this review is when he force to removed the back pack when he was saying it was loose 6:58
I want that MG Dynames. Then a MG Kyrios, MG Virtue/Nadleeh(with the same gimmick as the No Grade), annnnnnnnnnnnnnnnd a MG Exia 2.0!
An ABSolute beauty.
Thanks for the review.😀
Honestly I love the full saber version of 00 quanta, in fact the RG version might be my first p-Bandai Kit ^^ especially if I can use the gn sword 4 with a build custom I have planned ^^
Love this thing hell yeah so gettin one my old one still is holding that big ass sword up at full stretch
Mecha! If you search up gundam Barbatos repulse, you’ll find the worlds most amazing kitbash
I would love to see a PG Quanta
I thought Bandai will release all RG Wing Gundams.
Nice Video! Trans am Infinity :)
We better get a RG Gundam X before those
@@autismo721 never expect RG tallgesse. But yeah! Why not.
I pray that the new 00 series gives us at least a hg or even a rg ELS Quanta
Mecha gaikotsu-san! What do you think when comparing RG quant and MG quant full saber( whithout GN sword IV ). I plan to buy one of them in the new year. which one do you think I should buy? In my my gunpla group in vietnam, everyone suggested that I should buy MG quant full saber because the body ratio of the MG version is nicer than the the RG version. And in fact, I also prefer the mono eyes design of MG( It look so damn cool). But I prefer gunpla with scale 1/144 rather than scale 1/100( for convenience of display and the price is quite cheap for me). What should I buy? please give me some advice, mecha gaikotsu-san. Thank you so much!
Need not to worry coz they sell hands now for MG 1/100.
Amazing Intro
I would go for rg Gundam 00 quanta because it's solid as a brick!
I got the hg epyon for Christmas. I was tempted to put it out of its misery. But I glued some stuff and tightened up the joints and no It's better butt now by a whole lot
I just bought the 00 quant full saber from hlj now I will have three mg 00 quant the original the trans am ver and now the full saber
Time to build my xn raiser and save up for this
Which one is the best 00 Quan Exia? Can you make a compare and comparison video including MG kits and metal builds?
The blue logo Means its a new Bandai Production
Old bandai Logo is Old product
New bandai logo is new product
Old bandai = old Product Old Texture
New bandai = New product new texture
Bandai spirits = Rock solid
gundam 00 is easily my favorite serries.
Can you make the original backpack?
I picked this bad boy up while on vacation and gotta say one of the best master grades I've built. I just bought a second one this week and I'm gotta paint and customize it while hopefully having this sit next to my customized mg Barbatos on my window sil.
2:01 if you really look at it it looks like the seven sword and the exia had a baby
someone write a fanfic already 😳
would be nice if they sold the GN Sword IV Full Saber as a standalone option unit or something so that people who already own the 00 Qan[T] don't have to shell out the price of a full MG kit for it
Yeah, and it would be nicer if the new legs also sold separately. The articulation is so much better than the old Qan[T]
hi MG, do you plan to review the Diver Nami? :) I'm really looking forward to that because it seems that this kit is waaaaaaaay better than the satan fumina
6:40... the truth starts.. and it began to crumble
New Generation of Bandai
The only reasonable way to expand on an MS with a massive sword: two massive swords.
My 00q hands are stiff and loose ur review said it all but one thing is their separate for the gm sword IV FULL SABER... THANKS...😁😁