Guys, please, I need your help! I bough a FCB1010 to control my Bias FX 2 Mobile, but the editor is not working. I downloaded the program (the new version, by the way), install that and oppened. But, even than the program appears in my task bar as a normal working program, the window don't open in my screen. I'm completely loss... Can you help me? There's an other way to configure my FCB1010? Thank you very much. Your work is awesome! PS: A have some questions about midi chocolate, but I'll coment in correct video for more engage. :)
Unfortunately most of the midi to usb cables will not work. The only cable some users have reported that does work is the Roland UM-ONE mk2 USB MIDI Interface. Since we have no experience with this cable we cannot verify its usefulness. Thanks Guitar School Live
can you please provide your save file for Mountain Utilities (put it in your video description)?? i wanna see if its me or whats going on, bacause nothing is working right? I been trying this damn pedal for 2 years to get it to work every which way....i tried difffent chips too....bias fx2 is set up completely too.....biasfx2 will not learn the midi is the issue.
Hello @FPVMgunit13, thank you for reaching out to us for assistance. Are you using a USB to Midi cable or midi out of the FCB1010 into a midi interface? Guitar School Live
Hello @FPVMgunit13, we checked both our comments section and the ‘Held for review’ folder and don’t see a reply from you in either of those. Please re-post so we can assist you with your issue. Guitar School Live
@guitarschoollive thank you for getting back to me, I used an highly recommended USB to midiIN/midiOUT cable because my focusrite 2i2 does not have Midi interface. I followed your video exactly and the reason I wanted your mountain utilities file is because when I open up Mountain Utility on my first 2 columns I have SW1 and SW2 and they are all off position.... in your video those first 2 coulums do not exist at all..... and their is no way to remove them... Also so you know, on my USB to Midi cable it's definitely getting power, red led lights always on, and when I click a footpedal it is getting signal because the blue led lights up on cable (notififying that signal is made).... I wanna point out, after I save your configuration to my footpedal and then next step is for the pedal to learn biasFX2 that when I click pedal 1, 2, 3, 4, 5, etc (the number appears on the left side) shouldn it appear as 01, 02, 03, 04, 05, ???? How can I solve my issue, I will pay you for your help... 2 years I have this pedal sitting here, doing nothing... I have tried the Eureka chip as well.... but I have original back in again... Is their a midi box I need to buy?? I shouldn't have to buy a new interface???
@guitarschoollive thank you for getting back to me, I used an highly recommended USB to midiIN/midiOUT cable because my focusrite 2i2 does not have Midi interface. I followed your video exactly and the reason I wanted your mountain utilities file is because when I open up Mountain Utility on my first 2 columns I have SW1 and SW2 and they are all off position.... in your video those first 2 coulums do not exist at all..... and their is no way to remove them... Also so you know, on my USB to Midi cable it's definitely getting power, red led lights always on, and when I click a footpedal it is getting signal because the blue led lights up on cable (notififying that signal is made).... I wanna point out, after I save your configuration to my footpedal and then next step is for the pedal to learn biasFX2 that when I click pedal 1, 2, 3, 4, 5, etc (the number appears on the left side) shouldn it appear as 01, 02, 03, 04, 05, ???? How can I solve my issue, I will pay you for your help... 2 years I have this pedal sitting here, doing nothing... I have tried the Eureka chip as well.... but I have original back in again... Is their a midi box I need to buy?? I shouldn't have to buy a new interface???
It depends on what type of connector you have. We have an iPad with a lightening port so we go from the port to an Apple camera adapter to powered USB hub. The midi controller connects to the audio interface which is also plugged into the USB hub. I hope this helps. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. Thanks, Guitar School Live
Hello @jace865, thank you for reaching out to us for assistance. Please tell us what is flashing; is it the pedals on the controller or effects in the software? Also tell us about your setup. We need to know what you are using to transmit data to and from the Ipad? Guitar School Live
@@guitarschoollive I’m using a Presonus AudioBox iTwo, a PC with Windows 11, and BIAS FX 2. The pedals in BIAS FX flash. 1-5 change nothing and 6-10 don’t turn anything off or on. When I set the Wah, it chooses 100 and I have to change it to 10 but still doesn’t work. I followed the instructions 3x. Any help is very appreciated.
Hello @jace865, the video you’re watching is for Ipad. You need to watch this video: 🎞️How to control Bias FX 2 with the Stock FCB 1010 midi foot controller. (Step by step tutorial) - th-cam.com/video/J1kWMx724z4/w-d-xo.html Let us know your results and feel free to reach out to us again if you need any further assistance. Guitar School Live
Please go to facebook.com/guitarschoollive and send a screen capture of your editor setup and a video of the effects flashing via messenger or email to info@guitarschoollive.com
amazing, I will share this channel with friends - THANKS!!!!
We're glad you found the video useful.
Guitar School Live
Guys, please, I need your help!
I bough a FCB1010 to control my Bias FX 2 Mobile, but the editor is not working.
I downloaded the program (the new version, by the way), install that and oppened. But, even than the program appears in my task bar as a normal working program, the window don't open in my screen.
I'm completely loss... Can you help me? There's an other way to configure my FCB1010?
Thank you very much. Your work is awesome!
PS: A have some questions about midi chocolate, but I'll coment in correct video for more engage. :)
can i use a midi to usb (from fcb1010) cable converter ?
Unfortunately most of the midi to usb cables will not work. The only cable some users have reported that does work is the Roland UM-ONE mk2 USB MIDI Interface. Since we have no experience with this cable we cannot verify its usefulness.
Thanks
Guitar School Live
@@guitarschoollive thanks, I will buy that!
can you please provide your save file for Mountain Utilities (put it in your video description)?? i wanna see if its me or whats going on, bacause nothing is working right? I been trying this damn pedal for 2 years to get it to work every which way....i tried difffent chips too....bias fx2 is set up completely too.....biasfx2 will not learn the midi is the issue.
Hello @FPVMgunit13, thank you for reaching out to us for assistance. Are you using a USB to Midi cable or midi out of the FCB1010 into a midi interface?
Guitar School Live
@guitarschoollive it's so weird, I responded back yesterday with a long response and now I don't see it??
Hello @FPVMgunit13, we checked both our comments section and the ‘Held for review’ folder and don’t see a reply from you in either of those. Please re-post so we can assist you with your issue.
Guitar School Live
@guitarschoollive thank you for getting back to me, I used an highly recommended USB to midiIN/midiOUT cable because my focusrite 2i2 does not have Midi interface. I followed your video exactly and the reason I wanted your mountain utilities file is because when I open up Mountain Utility on my first 2 columns I have SW1 and SW2 and they are all off position.... in your video those first 2 coulums do not exist at all..... and their is no way to remove them...
Also so you know, on my USB to Midi cable it's definitely getting power, red led lights always on, and when I click a footpedal it is getting signal because the blue led lights up on cable (notififying that signal is made)....
I wanna point out, after I save your configuration to my footpedal and then next step is for the pedal to learn biasFX2 that when I click pedal 1, 2, 3, 4, 5, etc (the number appears on the left side) shouldn it appear as 01, 02, 03, 04, 05, ????
How can I solve my issue, I will pay you for your help... 2 years I have this pedal sitting here, doing nothing... I have tried the Eureka chip as well.... but I have original back in again...
Is their a midi box I need to buy?? I shouldn't have to buy a new interface???
@guitarschoollive thank you for getting back to me, I used an highly recommended USB to midiIN/midiOUT cable because my focusrite 2i2 does not have Midi interface. I followed your video exactly and the reason I wanted your mountain utilities file is because when I open up Mountain Utility on my first 2 columns I have SW1 and SW2 and they are all off position.... in your video those first 2 coulums do not exist at all..... and their is no way to remove them...
Also so you know, on my USB to Midi cable it's definitely getting power, red led lights always on, and when I click a footpedal it is getting signal because the blue led lights up on cable (notififying that signal is made)....
I wanna point out, after I save your configuration to my footpedal and then next step is for the pedal to learn biasFX2 that when I click pedal 1, 2, 3, 4, 5, etc (the number appears on the left side) shouldn it appear as 01, 02, 03, 04, 05, ????
How can I solve my issue, I will pay you for your help... 2 years I have this pedal sitting here, doing nothing... I have tried the Eureka chip as well.... but I have original back in again...
Is their a midi box I need to buy?? I shouldn't have to buy a new interface???
What midi interface works with an iPad Pro.
It depends on what type of connector you have. We have an iPad with a lightening port so we go from the port to an Apple camera adapter to powered USB hub. The midi controller connects to the audio interface which is also plugged into the USB hub.
I hope this helps.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
Thanks,
Guitar School Live
Something isn’t working for me. When I assign the pedals they flash on and off. Same with Wah and volume.
Hello @jace865, thank you for reaching out to us for assistance. Please tell us what is flashing; is it the pedals on the controller or effects in the software? Also tell us about your setup. We need to know what you are using to transmit data to and from the Ipad?
Guitar School Live
@@guitarschoollive I’m using a Presonus AudioBox iTwo, a PC with Windows 11, and BIAS FX 2. The pedals in BIAS FX flash. 1-5 change nothing and 6-10 don’t turn anything off or on. When I set the Wah, it chooses 100 and I have to change it to 10 but still doesn’t work. I followed the instructions 3x. Any help is very appreciated.
Hello @jace865, the video you’re watching is for Ipad. You need to watch this video:
🎞️How to control Bias FX 2 with the Stock FCB 1010 midi foot controller. (Step by step tutorial) - th-cam.com/video/J1kWMx724z4/w-d-xo.html
Let us know your results and feel free to reach out to us again if you need any further assistance.
Guitar School Live
I did. I commented on the wrong video.
Please go to facebook.com/guitarschoollive and send a screen capture of your editor setup and a video of the effects flashing via messenger or email to info@guitarschoollive.com