I have watched your all pulling videos but in this video the performance of both tractors are superb i love your channel anyhow you give good explanation nobody explain as you tell us thank you soo much
Now everything fall's into place, and both tractors did superbe, and had great run's. Also both tractors had excellent tire pressure, you saw the tires folding a bit, but exactly spot on..... Nice to see people doing things they are good in, and executing the whole bit exactly right en good.... 🚜🚜
Thats got tobe like a drug , dropping the clutch on those tractors and spooling up the turbo man addicting just watching the video. To do it irl has to be what keeps you guys in the sport.
Mason just straight up hooked up.. gotta be somethin ill under the hood cuz that was perrrrfect.. or.. are you bois going for Horsepower and dropping some torque as a result............. real head scratcher tbh
With a weld that thick there had to be a lot of heat going into it or there would be no penetration. And the weld goes from thick to nothing (just the pipe) with no taper. These two things will cause a heat affected zone and stress concentration near the edge of the weld. Throw in some heat and vibration when the engine is running and I'll bet it breaks again. Another way to attach the ferrule to the pipe would be to do a thin butt weld, like you did the first time and then 4 or 6 straps, of a similar thickness material running lengthwise, overlaying the joint. Thin welds on thin material will reduce the heat affected zone. The straps will give more weldment area and spread the stress out away from the butt ends, further down the pipe and ferrule. If you do order ferrules, get the longest version you can so there is more material to strap to. You can always cut a long ferrule shorter if you need to. Great channel. You guys seem to work together very well, in some trying circumstances.
Good hooks! But the track looked like poorly packed 💩. Maybe it's the "200 bu dirt", but I don't think it was packed nor filled right. But I am used to seeing mostly Red Clay tracks. Great video, good pulls, and a pretty face...😂👍👍
I just found your video I'm from western Pennsylvania usually go to hookstown fair pull . Thanks for being on and your one sexy farm girl by Hun keep it up.
whats the ice for cool the fuel or the air going in the turbo i have a cub cadet with a kobota d 950 turboed for garden tractor pulling and am allways lokking for more power
@@steverosenberger8671 because new viewers don’t know everything about us, or may only see one small part of what we do and we want them to know more about us and our operation so they come back to watch more. We constantly get questions about what we do so we say it right away
It's called an introduction. Just like the opening of TV Shows, but Emily explains things in an efficient manner, with a great smile. The intro to M*A*S*H went over 2 minutes. Lighten up on them. You are watching for more than the intro.
Nice job by all in this one! great pulls. Good to see the pressure stayed on the inside on both machines. Cheers!
Thanks 👍
*_Love these pulling videos !_* *_Glad there's more coming_*
More to come!
I have watched your all pulling videos but in this video the performance of both tractors are superb i love your channel anyhow you give good explanation nobody explain as you tell us thank you soo much
Thanks 👍
Great runs with both tractors!
Thanks 👍
Awesome!! Both Tractors Had Great Hooks! 🪝
Thanks Em!
Keep Smiling On!!
😅👍👊❤️
Thanks! You too!
Thunderclutch & the tom cat where putting in the hard yards! Awesome job team Elsing! Cheers n beer's from New Zealand 🚜🔧🏁🤘🇳🇿
Thanks 👍
Congratulations to the entire team.... 🙂😊
Thanks
Congratulations that was very good. Alot of work and planning goes into that.
Yes it was
Now everything fall's into place, and both tractors did superbe, and had great run's.
Also both tractors had excellent tire pressure, you saw the tires folding a bit, but exactly spot on.....
Nice to see people doing things they are good in, and executing the whole bit exactly right en good....
🚜🚜
Thanks 👍
Woohoo, great runs for both machines.
Thanks!
Show up and don't give up. Good Job Guys. And yes we have good black dirt and 300 bushel corn here in Iowa . Great videos.
😂
Awesome night, great job. Always good to see you succeed and not break.
Thanks again!
Great Job Team!
Thank you!
Thats got tobe like a drug , dropping the clutch on those tractors and spooling up the turbo man addicting just watching the video. To do it irl has to be what keeps you guys in the sport.
That it is
Thanks guys.
You bet!
Good pulling guys
Thanks
Great job
Thanks
Mason just straight up hooked up.. gotta be somethin ill under the hood cuz that was perrrrfect.. or.. are you bois going for Horsepower and dropping some torque as a result............. real head scratcher tbh
It was a nice pass
Even u guys have to appreciate that old school international. Working on the track crue.
Definitely
Awesome runs for both and no one blow up a turbo.
That’s always a good thing
Nice pull tonight.
Yes it was!
With a weld that thick there had to be a lot of heat going into it or there would be no penetration. And the weld goes from thick to nothing (just the pipe) with no taper. These two things will cause a heat affected zone and stress concentration near the edge of the weld. Throw in some heat and vibration when the engine is running and I'll bet it breaks again.
Another way to attach the ferrule to the pipe would be to do a thin butt weld, like you did the first time and then 4 or 6 straps, of a similar thickness material running lengthwise, overlaying the joint. Thin welds on thin material will reduce the heat affected zone. The straps will give more weldment area and spread the stress out away from the butt ends, further down the pipe and ferrule.
If you do order ferrules, get the longest version you can so there is more material to strap to. You can always cut a long ferrule shorter if you need to.
Great channel. You guys seem to work together very well, in some trying circumstances.
Definitely gets hot
Nice work on the video volume (Emily!!)
Thanks!
Good hooks! But the track looked like poorly packed 💩. Maybe it's the "200 bu dirt", but I don't think it was packed nor filled right. But I am used to seeing mostly Red Clay tracks. Great video, good pulls, and a pretty face...😂👍👍
Looks bad but it was good
Must buy that starting fluid by the semi load 😊
Absolutely
Can you have a video of the engine(s), transmissions, tires, etc., of all things involved in your pulling tractors?
We will make one soon
I just found your video I'm from western Pennsylvania usually go to hookstown fair pull . Thanks for being on and your one sexy farm girl by Hun keep it up.
Great job on this video and on the tractor pull. May I ask a question: How far behind are you on the videos ?
A month, hence why I’ve been cranking out as many as possible 😂
@NewAgeCustomFarming Thanks again, Emily, for your prompt response.
Sysco like the truck that went off the bridge in Louisville or Sisqo like Thong Song??🤣🤣🤣
Not sure 😂
Jones county fair is probably the best fair in eastern Iowa. Nice to see both tractors drive off. Rating of cheese crud’s?
It was really nice
why not pull in ntpa or go to bowling green?
Could you tell us the winning lengths? Good job fellers.
You can look up results on badger State tractor pullers
We will do that
Hi, Gorgeous!!
Hello!! -Avery
My BSTPA t shirts are getting tattered can I buy from you?
Check link in bio
Better buy that ring before WW3.
😂
You won’t be pulling at Kendall wi either then Labor Day weekend
Nope
whats the ice for cool the fuel or the air going in the turbo i have a cub cadet with a kobota d 950 turboed for garden tractor pulling and am allways lokking for more power
Air after turbo
ПРИВЕТ ЭМИЛИ С КАКОГО ТЫ ШТАТА И СКОЛЬКО ТЕБЕ ЛЕТ ВЫХОДИ ЗА МЕНЯ
Why do you always start out saying the same thing. I skip the first minute of your video. I get tired of hearing the same lines.
@@steverosenberger8671 because new viewers don’t know everything about us, or may only see one small part of what we do and we want them to know more about us and our operation so they come back to watch more. We constantly get questions about what we do so we say it right away
If you don’t like it leave you won’t be missed. People like you are nothing but a oxygen thief
It's called an introduction. Just like the opening of TV Shows, but Emily explains things in an efficient manner, with a great smile. The intro to M*A*S*H went over 2 minutes. Lighten up on them. You are watching for more than the intro.
Great job. !! Do you pull at the clay county fair in Spencer IA?
No we dont