DIY: Installing & Testing Shower Panel Tower System

แชร์
ฝัง

ความคิดเห็น • 56

  • @RajeshLingala-vu5hp
    @RajeshLingala-vu5hp 12 ชั่วโมงที่ผ่านมา

    Super ...exlent fitting

  • @threeblackburn
    @threeblackburn 3 ปีที่แล้ว +9

    I agree, I appreciate the no non sense approach, and the clear guidelines. Keep these videos coming!

    • @handytf
      @handytf  3 ปีที่แล้ว +1

      Thanks, will do!

    • @americanfreedom3416
      @americanfreedom3416 2 ปีที่แล้ว

      Looking for location of supply area specs

  • @SandraMaria-nt9ic
    @SandraMaria-nt9ic 5 หลายเดือนก่อน

    Gracias por ayuda ❤

  • @sandrahoyt2301
    @sandrahoyt2301 2 ปีที่แล้ว

    Can you post a picture of the instruction that have the distance between the holes and mounting bracket locations, and sizes of the fitting and hoses that were used? Please and thank you.

  • @medtuning
    @medtuning 2 ปีที่แล้ว

    Thx so much for this video

  • @alfredomontillavideos5739
    @alfredomontillavideos5739 8 หลายเดือนก่อน

    Excelente amigo😊

  • @karinazakabluk3747
    @karinazakabluk3747 2 ปีที่แล้ว +2

    what shower brand is this and how do you change the batteries?

  • @mantiyaz1
    @mantiyaz1 3 ปีที่แล้ว +1

    Thank you for the instructions!!! 👍🏽

  • @prestonian1066
    @prestonian1066 ปีที่แล้ว +2

    Helpful video thanks. BUT you made some simple and potentially very costly mistakes with the wall plugs.
    Never knock them into the wall with a hammer directly or you could smack the tile enough to smash it. Place the tip of the screw into the plug to knock it in when you get close to the tile.
    Either sink the plug beyond the tile or use a slightly larger drill bit at the start of the hole to accommodate the head of the plug, otherwise when it expands it can crack the tile.
    Finally, either set the torque really low on the cordless driver or do it by hand.

  • @albetiziano
    @albetiziano ปีที่แล้ว

    Hi, where do you get replacement flexible pipes? The one that came with the shower panel are thinner and can’t find it on merchant.

  • @somaaelsapak6361
    @somaaelsapak6361 3 ปีที่แล้ว +1

    Great video thanks sir for that

    • @handytf
      @handytf  3 ปีที่แล้ว +1

      So nice of you

  • @plumbingwithelectriceannag5144
    @plumbingwithelectriceannag5144 3 ปีที่แล้ว +1

    Supper bro

  • @reddhater
    @reddhater 2 ปีที่แล้ว

    It looks like you need the shower panel to get the water supply positioning out of the tiled wall and to have ot installed as per your desired height on the shower wall - otherwise you may be forced to install it at an inconvenient height.
    Instructions mention this, which means that you need access from behind shower wall or build shower walls after you get your shower.

    • @handytf
      @handytf  2 ปีที่แล้ว

      The water supply lines were specifically positioned for the panel before tiling.

  • @robinharris1085
    @robinharris1085 2 ปีที่แล้ว +3

    Make sure you have Gardening gloves, eye protection, helmet, steel boots .

    • @Wavelover33
      @Wavelover33 2 ปีที่แล้ว +1

      Headphones and knee pads too lol

  • @kumarcdo1
    @kumarcdo1 ปีที่แล้ว

    Where you fix the heater

  • @eljaydiver1
    @eljaydiver1 11 หลายเดือนก่อน

    I am still trying to figure out how to replace the batteries...I cannot get the compartment open!

  • @vitoperricelli8485
    @vitoperricelli8485 3 ปีที่แล้ว

    Please show operation of panel once it is installed. Curious as to how the light works. Does it require wiring?

    • @handytf
      @handytf  3 ปีที่แล้ว +1

      The light is powered by battery, no wiring is required. The button on the side is used to turn on/off the light. The pain is when you want to replace the battery, you need to take off the whole unit.

  • @mark.r8900
    @mark.r8900 10 หลายเดือนก่อน

    Hi, does the hot and cold water hose already have built in washers? Or do you manually need to add washers yourself? Thanks

    • @handytf
      @handytf  10 หลายเดือนก่อน

      built in

  • @adeelahmed3996
    @adeelahmed3996 8 หลายเดือนก่อน

    How to increase water pressure on this system, specially if it's clogged with calcium built-up

  • @jhonkasanchez5820
    @jhonkasanchez5820 4 หลายเดือนก่อน

    Cómo evitar que se mezcle agua fría y. Caliente

  • @Houstonpromasonry
    @Houstonpromasonry 3 ปีที่แล้ว +1

    How does the led power on? I've seen models with led around knobs and head

    • @handytf
      @handytf  3 ปีที่แล้ว +1

      It uses battery. In this model, there is a red button on the side, push it in to turn the LED on.

  • @mhomadmadiyar2677
    @mhomadmadiyar2677 11 วันที่ผ่านมา

    brother how to connect the electronic power panel is it on AC power or DC power and how much watt

    • @handytf
      @handytf  11 วันที่ผ่านมา

      it uses battery

    • @vanessa4038
      @vanessa4038 8 วันที่ผ่านมา

      I can't find the battery pack on mine??

  • @reddhater
    @reddhater 2 ปีที่แล้ว

    Hmm, bottom bracket location seems to be tricky / as the routing of the 2 water supply connecting tubes is not easy to ensure a flush installation
    Video shows several holes drilled before I guess at a less than perfect location…
    Best location of bottom bracket on the panel itself should be higher…

    • @handytf
      @handytf  2 ปีที่แล้ว

      This is to replace the old shower panel, the other holes were for the old one.

  • @marywow9659
    @marywow9659 2 ปีที่แล้ว

    They didnt show you the wobble

  • @aljayy1225
    @aljayy1225 6 หลายเดือนก่อน +1

    Where can we get the button. If it’s not working to turn it on? Or is it the battery

    • @anthony402
      @anthony402 8 วันที่ผ่านมา

      I have the same issues with mine

    • @aljayy1225
      @aljayy1225 8 วันที่ผ่านมา

      @@anthony402 it was the battery, it’s in a covering

    • @anthony402
      @anthony402 8 วันที่ผ่านมา

      @@aljayy1225 do u know where the covering is

    • @aljayy1225
      @aljayy1225 8 วันที่ผ่านมา +1

      @@anthony402 you will have to take the unit off the hook. Hold the shower unit and pull up to unhook it. After you do that, have someone hold it, while you trace the wires are the back, the battery should be in a black protective covering be careful not to damage any wires. After you replace the battery with two AAA I think, then you’ll see the light in the display, those batteries activate an actuator that allows the hot water to come out

    • @anthony402
      @anthony402 8 วันที่ผ่านมา +1

      @@aljayy1225 thank you very much I will give it a try.

  • @reddhater
    @reddhater 2 ปีที่แล้ว

    Does not look flush to wall after installing it

    • @handytf
      @handytf  2 ปีที่แล้ว

      Actually it does. you can also caulk along the edge, but I would advise against it.

  • @alinalee6241
    @alinalee6241 3 ปีที่แล้ว

    Great, and we have heater built-in type smart shower panel or just shower panel tower system , pls contact us if you are interested.

  • @salahjabbar6199
    @salahjabbar6199 4 หลายเดือนก่อน

    Where the light get power from

    • @handytf
      @handytf  4 หลายเดือนก่อน

      battery

  • @marcelaperonja9597
    @marcelaperonja9597 3 ปีที่แล้ว +1

    No water pressure in that shower

    • @handytf
      @handytf  3 ปีที่แล้ว +1

      The water pressure will be low, if multiple jets are on, otherwise the pressure is pretty good. I just installed the second one in my house.

  • @orlandomonroy3494
    @orlandomonroy3494 2 ปีที่แล้ว

    Hidro ducha

  • @krishnatharu1463
    @krishnatharu1463 3 ปีที่แล้ว

    new video

  • @howtodo8728
    @howtodo8728 ปีที่แล้ว

    😂

  • @ramsesvega5066
    @ramsesvega5066 3 ปีที่แล้ว +3

    3:20 that’s the dumbest thing I have ever seen

    • @gatoborracho4572
      @gatoborracho4572 2 ปีที่แล้ว +1

      It's ok 👍..just needed to use a rubber hammer instead

  • @nageswarao.nnagu.5397
    @nageswarao.nnagu.5397 ปีที่แล้ว

    My.pohnenambar