Alex I'm 16 and am starting/have started multiple businesses so I can fund a project car when I'm ready; what are some of the best driver's cars that aren't money pits for sub 45k-50k (Doesn't have to even come close to that limit 💀)? I'd like to be able to cruise around and (allegedly) do some highway pulls while also still being able to carve some corners if I need to. Appreciate the help, your channel growth has been awesome to watch keep making great content 🫡
Hey Alex, with all do respect it appears that lot of technical work is new to you and I want you to be safe. I noticed you didn't use a jack stand and had your legs underneath the car for extended periods of time. Jacks are lifting devices not stands. Please secure the car on stands or at least throw something underneath before getting to work. Be safe, you have my support! 👊
Some darn good looking wheels! I miss the Hunter Auto34R at my old shop. Only machine i've used that can mess with those raised spokes without tearing mess up. Yea it's still no fun with all the tools.
I REALLY like wide tires, 33X21.50X15 on '64 ProStreet Corvette, but, and i know it's hard to belive, but you can go too wide. As in when the rubber meets the fender before it reaches the road. Like Grand Sport wheels on base Corvette. On Lamborghini and Ferrari i just kinda left em alone. Look good tho.
@@AlexMartini. gooooooodaaamn. I finally get a reply from the great Alex Martinez. 😅 looking forward to meeting you with Jake and his Subaru this year.
Careful with them ducks my man. I would prob do that as well but a gentleman was hit and killed like 5 days ago in Rocklin helping a family of ducks cross the street. Very tragic to lose ur life over that little act of kindness. On a different note i feel u on not having all the tools for the job :/ lol. Ur now a huge content creator! Get them sponsors lined up and get all the tools needed!
It would look Amazing without the stupid boy racer wing. It's a FERRARI not a civic. To each his own I guess. I see so many cars with the duckbill spoilers which are air brakes at speed making your car less aerodynamic and thus slower. Oddly enough my Hellcat M6 Challenger has a Downforce Solutions duckbill. It was on the car when I bought it. When I install acarbon fiber trunk lid, I'll be eliminating that unecessary piece of aluminum. I also suggest a good set of race seats for anyone doing spirited driving. I installed Sparco Grid Qs in the Hellcat, and they are amazing. No more sliding around on the factory lounge buckets plus they offer a significant weight reduction. I really like the change Ferrari made starting with the 355. They just kept getting better and better. The 430 is very nice and of course the 458 Italia was a masterpiece. Congratulations on the car. It looks great but as stated the wing is ridiculous. The only wing that big that is appropriate is the Viper ACR. Even it looks ridiculous, but it is functional
This man really working on his cars with expensive ass Human Race NMDs. Alex be drowning in Benjamin’s lmao Also you’re not supposed to touch baby ducks. I’m almost certain the mother ducks will see that as their ducklings got “tainted”
I prefer working on my vehicles by myself or ( as weird as it is) with my wife helping out, but that's as far as I go. I don't like working on any vehicle with other people around. That's because most of the people I know don't know know a Damn thing about working an vehicles but love telling you what you're doing wrong... both ways are frustrating but I find having dumbasses around you "helping" is way more frustrating than working by yourself
"No More Mods, Only Maintenance" 🤣😂🤣😂
The lies we tell ourselves.
Me: “This is my las mod”
Also me: “ooo sale”
Y’all need to remind me this more often 😅😅😅
Them wheels GO HARD ngl. The contrast against the grey makes them POP. Very nice 😎👍
Thank you
Looks way better and that fitment is perfect 🥵
Alex I'm 16 and am starting/have started multiple businesses so I can fund a project car when I'm ready; what are some of the best driver's cars that aren't money pits for sub 45k-50k (Doesn't have to even come close to that limit 💀)? I'd like to be able to cruise around and (allegedly) do some highway pulls while also still being able to carve some corners if I need to. Appreciate the help, your channel growth has been awesome to watch keep making great content 🫡
You’d be hard pressed to be disappointed in anything Toyota or even mid domestic corvette !
More painting-shorts content PLEASE 👀 like black Ferrari hood. Sincerely, Automotive Painter Industry
Hey Alex, with all do respect it appears that lot of technical work is new to you and I want you to be safe. I noticed you didn't use a jack stand and had your legs underneath the car for extended periods of time. Jacks are lifting devices not stands. Please secure the car on stands or at least throw something underneath before getting to work. Be safe, you have my support! 👊
Some darn good looking wheels! I miss the Hunter Auto34R at my old shop. Only machine i've used that can mess with those raised spokes without tearing mess up. Yea it's still no fun with all the tools.
Normal noob mistake. But did you get hub centric rings that fit the wheel to the wheel hub bore? That would help line up your lug/studs tremendously!
how would that solve his issue though? The issue he described is an interference issue between the bolt and the bolt seat on the wheel.
All you need is one of those sanders you use for thumb holes on bowling balls.
I REALLY like wide tires, 33X21.50X15 on '64 ProStreet Corvette, but, and i know it's hard to belive, but you can go too wide. As in when the rubber meets the fender before it reaches the road.
Like Grand Sport wheels on base Corvette. On Lamborghini and Ferrari i just kinda left em alone. Look good tho.
Stick a screw driver into the vents of the rotor next time so it rests up against the caliper when you go to loosen/torque the spacers 😉
Bruh Alex is a national treasure. I love this
so on the current fitment does it rub in the rear? looks baller.
She's pretttttty close hahaha
@@AlexMartini. gooooooodaaamn. I finally get a reply from the great Alex Martinez. 😅 looking forward to meeting you with Jake and his Subaru this year.
Best F430 on TH-cam 🔥🔥
Where is the rear lip wheels and tires are not complete unless the rear wheel has a massive dish
BRUH. Please call me next time you need a wheel slap! My god..
I’m sorry!!!
This was so worth it, car looks gorgeous
Absolutely beautiful!!!😮💯🤤🥳💪👏
So much better... the blue wheels were terrible... subbed once I saw these wheels installed lol
Looking good Alex!
using the dremel in a star pattern 🤌🏻
Careful with them ducks my man. I would prob do that as well but a gentleman was hit and killed like 5 days ago in Rocklin helping a family of ducks cross the street. Very tragic to lose ur life over that little act of kindness. On a different note i feel u on not having all the tools for the job :/ lol. Ur now a huge content creator! Get them sponsors lined up and get all the tools needed!
Came out very clean 👏🏼🔥
Ghost in the graveyard, 😂 takes me back
Vid 2 of asking when alex.martini with two underscores is going to remove/replace the two underscores
I would never put those ugly blue wheels back on. The gold ones look AMAZING! Totally puts it in a different class🤙
Much better look! Make sure you blur your personal info you don't need weirdos stalking you
Fixed, thank you!!😊
I love your vids man
This thin neeeeeds a bigger front lip!! Otherwise looking great!!
The jack situation has me nervous
It would look Amazing without the stupid boy racer wing. It's a FERRARI not a civic. To each his own I guess. I see so many cars with the duckbill spoilers which are air brakes at speed making your car less aerodynamic and thus slower. Oddly enough my Hellcat M6 Challenger has a Downforce Solutions duckbill. It was on the car when I bought it. When I install acarbon fiber trunk lid, I'll be eliminating that unecessary piece of aluminum. I also suggest a good set of race seats for anyone doing spirited driving. I installed Sparco Grid Qs in the Hellcat, and they are amazing. No more sliding around on the factory lounge buckets plus they offer a significant weight reduction.
I really like the change Ferrari made starting with the 355. They just kept getting better and better. The 430 is very nice and of course the 458 Italia was a masterpiece. Congratulations on the car. It looks great but as stated the wing is ridiculous. The only wing that big that is appropriate is the Viper ACR. Even it looks ridiculous, but it is functional
The struggle is real, but hey it looks 🔥👊🏼
Story of my life dude!
😀
Stick a screw driver in the slotted rotor and against the caliper to keep it from spinning.
No, more mods, no maintenance 😏
Never, mods are life. Just gotta step ya game up. I've been collecting tools for like 20yrs. Don't have it? Go buy, you'll have it for next time. Haha
This man really working on his cars with expensive ass Human Race NMDs. Alex be drowning in Benjamin’s lmao
Also you’re not supposed to touch baby ducks. I’m almost certain the mother ducks will see that as their ducklings got “tainted”
I prefer working on my vehicles by myself or ( as weird as it is) with my wife helping out, but that's as far as I go. I don't like working on any vehicle with other people around. That's because most of the people I know don't know know a Damn thing about working an vehicles but love telling you what you're doing wrong... both ways are frustrating but I find having dumbasses around you "helping" is way more frustrating than working by yourself
😢😢😢 as soon as I saw the dremel
Owns a Junkyard F430, Doesn't have a Milwaukee Impact = Priorities
If I can play Spanish scrabble does that mean I can work on cars
Yes that is the qualification