Great channel and videos mate,,,, Good to see what other guys are doing out there,,,, Full installs for me tho , going job to job getting all the gear out of the van every time would do my my swede in son , Keep up the good work soldier
I’m just a diy guy and pick up handy hints from you guys (like opening bleed valve when soldering). If I were a plumber, I’d wanna be jobbing about as well, passes the time and I’d find it more interesting. All the best mate, enjoy your videos, keep the content coming.👍
@@bestversionfitness8361 cheers pal, good read that. Glad you’re picking up tips from us guys! Jobbying definitely has the variety factor! All the best buddy!
You made me laugh on that toilet job you sounded just like me predicting where it was going to leak from 😂I'm just like you i love the jobbing around stuff much prefer to have a day of them than getting involved with installs......Happy New Year Dan & hope you get the subscrictions up in 2025 👍
Briiiiliant stuff pal happy new year. Always have leaded solder obviously only on heating and then the old bread trick never fails.may the best of your past be the worst of your future all the best 👍🏼 pal
Been there, done that, put a nail through a central heating pipe at my mum's when I was 18 to fix a a squeaky floorboard. Next thing the wallpaper below in the kitchen started to bulge. Was able to fix it myself as had done some basic plumbing for other DIY, but took all night to get the heating (open vented) working again. Haven't made that mistake since, I'm now 51.
Happiest new years to you and your family. Thank you for a year worth of content and entertainment. To bigger and better growth on TH-cam in 2025 LFG !
Our first house had that problem! Right by sink. We thought we were splashing water but closer investigation showed we had a tiny shower installation under the floor...
I used to love the verity, First fixing a new build then a bit of jobbing, maybe a solid fuel to oil conversion, there was no gas in NI at the time, the back to second fix the new build, no greater feeling in the world than getting a system filed for the first time and getting everything tested and working. What I did hate were old house renovations that you ended up spending most of the winter in freezing your ballcock off.
Yeh I get that mate and you’re right it is a good feeling when you fire it up first time. I get that feeling on boiler repairs mostly haha. Last year I was on a house renovation freezings my bollox off, remember it well 😢😂😂😂
I find these solder repairs so tricky - best thing i have bought in last few years is a wet vac to suck the pipes dry - and then with 22mm some boy told me i was overheating the fittings and too fast - so the solder was running out... he said build the heat up on the pipes either side of the fitting then finish on the fitting and touch a solder stick to the join... never had a 22mm fail since.
@@Heatking im a leak detection boy with a bathroom background... so heating and boilers are not my main bag.... but i do heating leaks as well... the guy who advised me does gas and soldering every day
@@56ty78ui haha. I will do that in the next few months as I plan to change the setup so will film that, currently just a main compact combi running with a nest!
Same as you mate, love jobbing about, sacked bathrooms hate them. That call out would be just a normal charge for an existing customer. They show me loyalty I show it back. Make more money that way. The lads that say don’t get out of bed for less than £500 have no customer base.
@@Heatking wow!!!! As a customer, I'd have bitten your hand off at that! That almost sounds too cheap... what do others local to you charge... fine line between not taking advantage but covering all your costs and training. If I called a vet out to put my pet to sleep, it would be over £250..... and it's a lot easier than what you've just done!
Love a toilet repair I’m a bit of a specialist these days 😂 though those flush pipes are a pain in the arse for leaking . Didn’t know you could get those little flexis will have to pick a few up. Happy New Year Dan. Paul the Plumber in N.Ireland
@@Heatking I have seen a US plumber adding a bleeder right by the soldering work. The most similar-looking part that I can see in the UK is an "air vent cap". Just a thought.
@Heatking got to think about the wear and tair on your tools the added miles each job put on your van so on and so forth mate u be luck if £80 comes anywhere near 👍
Yes I used to think that, , think of the money£, , why ? Cos the more you earn the more the tax man takes to keep the illegal immigrants in 4 star hotels, I've packed in work and let the state pay for me and my umpteen kids, happy new year
So I'm not being sexist mate but woman are the worst for breaking toilets. My missus has puled our toilet seat off more than once. She'll lean over towards the basin to clean her teeth while sitting on the loo and of course it pulls the seat to one side. Or she'll kick off her boots or trousers while sitting there and it all goes to loosen the seat. It wouldn't be a big deal but it's one of those pans that fits against the wall with all pipes and access hidden. It seemed like a good idea at the time for neatness and easy cleaning. So it has to come out every time to screw the hinge back on. It's off again now but this time I'm going to use thread seal on the bolt and glue the hinge. So the pan will probably break next time. As for your call out it sounded to me that the lady had tried a little DIY drilled through the pipe and was blaming her poor husband who at the time was having a quiet drink down the pub after a hard day. I would have gone in there, wrapped chewing gum around the screws, tightened them up and wrapped it all with insulation tape and put the floor boards back down. I would have charged £795.21 for the job plus GAT (Glen's added tax) and would have given a no quibble 14 minute money back guarantee. I would have then used the money for a couple of days break in Spain. Am loving the vids, happy new year mate.
Haha, love how you’d approach the call out 😂😂😂 like the sound of that. Your missus with the toilet seat… grrr yes all that will keep loosening it or even breaking it. The thread seal will Help, but like you say, if you ever come to remove, it’ll be a pain! But oh well😂 All the best for 2025 buddy’ thanks for the support this year!!
Thank you all for your support this year. Means the world to me. All the best for 2025! See you next year! (Thursday) 😂 ❤
Happy new year buddy! 🎉🎉
@ and you matey! All the best!
Happy New Year Dan! All the best to you and for the channel into 2025! Also, thanks for another year of great content 👍
@@Trioptimum2010 wow thank you mate! That’s incredibly kind of you!!! All the best for you and yours! More to come this year ♥️♥️
Has the bloke run off in shame 😂😂😂 2:47
😂😂 apparently….
Great channel and videos mate,,,,
Good to see what other guys are doing out there,,,,
Full installs for me tho , going job to job getting all the gear out of the van every time would do my my swede in son ,
Keep up the good work soldier
Cheers mate. Appreciate that! And yeh I get what you’re saying, sometimes keep taking all the tools out etc out does my head in 😂😂
Makes me feel better seeing someone else having soldering problems. Good watch, thanks.
Cheers mate. I’ve gone rubbish at soldering since using press.
@@Heatkingjust overdo it, especially when it’s under the floor, good job btw
Great video mate. I prefer jobbing plumbing jobs like yourself 👍😎 Have a good New Year 👍
Thanks mate. I just love the variety! All the best pal!
Happy new year Dan, thanks for another great video 👍
You’re welcome! All the best mate!
Thanks
@@AlexRocks24-7 thank you for all your support this year mate! ♥️
@Heatking thank you Dan. Looking forward to your videos in the New year.
@ thanks mate! Plenty to
Come :)
I’m just a diy guy and pick up handy hints from you guys (like opening bleed valve when soldering).
If I were a plumber, I’d wanna be jobbing about as well, passes the time and I’d find it more interesting.
All the best mate, enjoy your videos, keep the content coming.👍
@@bestversionfitness8361 cheers pal, good read that. Glad you’re picking up tips from us guys! Jobbying definitely has the variety factor! All the best buddy!
You made me laugh on that toilet job you sounded just like me predicting where it was going to leak from 😂I'm just like you i love the jobbing around stuff much prefer to have a day of them than getting involved with installs......Happy New Year Dan & hope you get the subscrictions up in 2025 👍
Haha. I think it’s good to predict.. until you predict wrong haha! Yeh jobbing around is the best by a long shot! All the best Rob for 2025! ♥️
happy new year dan I love plumbing jobbing too regards John
@@johnrowland6214 thanks John! Appreciate that! All the best to you too!
Great work as always Dan.....Happy New year to you and family
@@shaunmcc9861 thanks buddy! And likewise :)
Brilliant content Dan, Happy New Year 😊
Thank you Paul! All the best mate ♥️
Happy new year Dan. Keep sending it👍🏻
Cheers pal! All the best to you mate!
Top vid, im with you. I get bored after 2days on jobs and would sooner be out jobbing, much more fun & enjoyable. Have a good new year
@@stephenpyrek4726 thanks Stephen! Yeh absolutely with you on that one! All the best pal!
Happy new year Dan, brilliant video as always, best wishes Mick
@@michaeleardley3763 thank you Mick! All the best mate!
Happy New year Dan keep at it buddy all the best for 2025
Thanks Wayne! All the best to you and yours pal!
Love the easy jobs too lad...even servicing, all good with me!! 🤟🥳
Legend!
Who would be a plumber 😂, I will stick to wood 😂😂 nice work mate 👍
@@SwjoineryandPM haha. I envy you joiners to be honest. You have probably the best trade imo! Thanks for watching pal!
It’s not all sunshine and rainbows mate 😂, we just can’t flood a house 😂😂
Happy Hogmanay from Scotland, Happy New Year to you and your family! All the best for 2025!!
@@Bigdaftboy cheers buddy! Happy new year and all the best to you and yours too! ♥️
That needs a bit of MJ Tiff silicone to seal everything 🙈🙈😂😂😂😂
Never heard of him
Mate 🤷🏽♂️😂😂
@ He’s got a utube channel and very famous 😂😂😂😂😂😳🙉🙈
@ I was only joking 🙃
@ I know 😂😂😂😂🍸🍹
@ all the best for 2025 Neil! ♥️♥️
Briiiiliant stuff pal happy new year. Always have leaded solder obviously only on heating and then the old bread trick never fails.may the best of your past be the worst of your future all the best 👍🏼 pal
@@YNWA-oq5uf I need to remember this trick! I always forget. But it’s a great shout. Nice one mate and all the best to you and yours!
Been there, done that, put a nail through a central heating pipe at my mum's when I was 18 to fix a a squeaky floorboard. Next thing the wallpaper below in the kitchen started to bulge. Was able to fix it myself as had done some basic plumbing for other DIY, but took all night to get the heating (open vented) working again. Haven't made that mistake since, I'm now 51.
@@robshorts touch wood Rob! Haha. I’ve screwed throw I pipe on an electric shower before and hit numerous cables! 😩😂
Have a great New Year, Dan 👍
Thanks mate, all the best! ♥️
Happy New Year Dan, all the best for 2025. not a bad few jobs there too.
Thanks Daz! All the best to you and yours matey!
Happy new year mate 👏🏻
Same to you! 🥰
Happy new year mate looking forward to more content for 2025!!
Thanks Andy! Plenty to come in 2025! ♥️♥️
Happy new year Dan, fantastic content over 2024
Here’s to 2025 👍🏻👍🏻
@@MegaShan001 thanks mate! All the best!
Happiest new years to you and your family. Thank you for a year worth of content and entertainment.
To bigger and better growth on TH-cam in 2025
LFG !
@@thegrinch295 thanks mate. And thank you for your support this year! It’s noticed and very much appreciated! All the best to you and yours!
Happy new year mate..all the best
@@pault3705 thank you mate! And you :)
Wish I had a pound for every time I left the nut on the flush pipe ! 🙈👍👍
Happy and prosperous new year to ya 🎉❤
@@MB-zl3cn haha. Me too mate! And all the best to you and yours buddy! ♥️♥️♥️
Beau as always Dan Hahahahahahahahah
All the best Keith ♥️
Happy new year, Dan.
@@TheTimBullimore thank you Tim! And you!
Our first house had that problem! Right by sink. We thought we were splashing water but closer investigation showed we had a tiny shower installation under the floor...
Oh! Haha. Was that for mice? 🐁 😂😂😂
@Heatking thankfully we weren't on a water meter...
@ yeh that’s always a bonus buddy
Your so good at what you do Dan 😊
I’m just average mate :) but thank you :)
I used to love the verity, First fixing a new build then a bit of jobbing, maybe a solid fuel to oil conversion, there was no gas in NI at the time, the back to second fix the new build, no greater feeling in the world than getting a system filed for the first time and getting everything tested and working. What I did hate were old house renovations that you ended up spending most of the winter in freezing your ballcock off.
Yeh I get that mate and you’re right it is a good feeling when you fire it up first time. I get that feeling on boiler repairs mostly haha. Last year I was on a house renovation freezings my bollox off, remember it well 😢😂😂😂
Happy new year m8 all the best for 2025
@@alexhaley6271 thanks mate. And same to
You!
I would have just used a compression fitting on that last straight joint seeing there was no visible vent for the pressure
I don’t like compression fittings under floors really mate.
Existing customer, 45 mins, I’d probably have done £60 but that’s why I’ll never be rich😂
Happy new year fella
Cheers Michael! You’re as soft as me then haha! All the best buddy.
You can always tell a man by the size of his flexi 😂
😂😂😂😂😂
Hope 2025 is a good year again for you!
Im sitting in my van watching this video, asking myself "why did i sign up for call outs" 😂
@@colin4685 haha oh dear! Good luck with them tonight pal! Thanks for watching though! And all the best for you mate!
I find these solder repairs so tricky - best thing i have bought in last few years is a wet vac to suck the pipes dry - and then with 22mm some boy told me i was overheating the fittings and too fast - so the solder was running out... he said build the heat up on the pipes either side of the fitting then finish on the fitting and touch a solder stick to the join... never had a 22mm fail since.
I’m going to try that method thank you mate! I’ve got a wet vac, I just hardly ever use it! And I should do! Haha
@@Heatking im a leak detection boy with a bathroom background... so heating and boilers are not my main bag.... but i do heating leaks as well... the guy who advised me does gas and soldering every day
You need the press rings matey, MacDonald plumbing sell their own version at half the price of the named manufacturers - they work a treat.
@@Baldylocks-w2j cheers mate, I’ve got the 15mm ones but they never seem
To have the 22mm ones in stock when I’m
Ordering haha!
@@Heatking try finding them for the rp350 😂
@ cheers pal
Did you put that Worcester in dan?
No mate. Boxt install.
Be like us common plumbers and blow the water out £120-£160 for that job + inhibitor if total drain(midlands based)
@@neilsmith2323 cheers pal. ♥️
The dreaded steam..... i like to get the wet vac on the pipe.
@@Frozen-Explosion I need to use mine more often!
That's how you make your money lots of different relatively easy jobs, but we all know the easy ones can turn into an arse of a job in no time
@@shooter7577 yeh that’s true in regards to earning the money! And absolutely they can turn in no time! Haha
😂😂 Xmas jobs
😎🤜👍
Haha standard! Best time to do them!
Happy New Year, Dan! So out of curiosity, what did you charge for that emergency call out?
@@johngreaves4202 thanks John! And you mate! I charged £80 plus materials for this one.
@Heatking seems to be a very fair price. I also hit a pipe a few years back and it cost me £220 for an emergency plumber, although it was a Sunday.
@ yeh I may have charged more for a Sunday. But it was a Wednesday I think, and a regular customer :)
As an end to 2024, I reckon you should show your own heating and plumbing setup in your house Dan. What do you reckon?
@@56ty78ui haha. I will do that in the next few months as I plan to change the setup so will film that, currently just a main compact combi running with a nest!
£200. Or £160 plus vat. Standard 👊🏻 happy new year 🎊
Thanks mate! All the best!!
🤘😎🤘
@@SuperWayneyb All the best Wayne!
Same as you mate, love jobbing about, sacked bathrooms hate them. That call out would be just a normal charge for an existing customer. They show me loyalty I show it back. Make more money that way. The lads that say don’t get out of bed for less than £500 have no customer base.
Yeh I’m with you mate. I charged £80 plus materials I think for this one.
@@Heatking wow!!!! As a customer, I'd have bitten your hand off at that! That almost sounds too cheap... what do others local to you charge... fine line between not taking advantage but covering all your costs and training.
If I called a vet out to put my pet to sleep, it would be over £250..... and it's a lot easier than what you've just done!
as a lic plumber in usa i get 250.00 emncy call out and 475.00 to repair the heat zone eddie leak master plumbing
Nice! Out of curiosity what do you get for a normal
Working hour buddy? Welcome to the channel too! I’m made up I got a US viewer haha!
Love a toilet repair I’m a bit of a specialist these days 😂 though those flush pipes are a pain in the arse for leaking
. Didn’t know you could get those little flexis will have to pick a few up. Happy New Year Dan. Paul the Plumber in N.Ireland
@@theorgazoid4918 I love a toilet repair too mate haha! And yeh the little flexis are handy! All the best matey!
I thought u soldering the elbow left the last bit to press but u didn't😂
@@ununha 😂😂😂
I'd rather do jobbing jobs especially toilets i do loads of them happy new year buddy
@@winnieowen4401 thanks buddy! Nice to see you again! All the best!
What the hell of Gregg Wallace was he trying to do with those screws anyway? Easy £120 that. Happy NYE buddy.
Yep £120 for me too.
Haha I’m not sure mate! Cheers for the prices! All the best buddy!
Thought you’d have pressed the whole job
I did contemplate it haha.
none a emncy service calls are 150.00 to walk thought the door and the rest is what ever i fix !!! thx edbonjovi aka leak master plumbing
Thank you master! All the best for 2025!
us plumbers are under paid if anything we should be at 50k/60k mark by now hopefully the shortage in future increases wages.
@@AYYCOL_ absolutely agree there
@@Heatking have a good new year fella
@ cheers pal and you! All the best!
Did you not have a bleeder open while soldering?
@@metallitech yeh I opened one up on the towel rail in the bathroom mate.
@@Heatking I have seen a US plumber adding a bleeder right by the soldering work. The most similar-looking part that I can see in the UK is an "air vent cap". Just a thought.
@ could be onto something there mate.
150£ pal
£150 minimum call out bro that's what i do makes it far for everybody that way
@@robbinbanks1311 cheers mate that’s good to know! I need to
Up my prices! I charged £80
Plus materials!
@Heatking got to think about the wear and tair on your tools the added miles each job put on your van so on and so forth mate u be luck if £80 comes anywhere near 👍
I’d charge £350 for that
Funny how we’re all different I’m used to the jobbing work but don’t like it , would rather be on an install job for weeks on end good luck for 2025
Yeh that’s true, where as I’d rather be jobbying haha! All the best mate!
emergency in broad daylight? lol
Yeh it was working hours, I had to leave a job to go to it.. in an emergency haha.
£150 call out fee same day
@@mdocko2285 thanks buddy!
You book to many jobs dont allow extra time for problems plus dont carry enough spares 😊
@@tridens6708 cheers 🍻
£240
Thanks for your feedback buddy!
£500
@@royhorn9412 I’d never get that haha
Yes I used to think that, , think of the money£, , why ? Cos the more you earn the more the tax man takes to keep the illegal immigrants in 4 star hotels, I've packed in work and let the state pay for me and my umpteen kids, happy new year
Haha. I can see why that’s a good option with the way the world is! Happy new year too you!
So I'm not being sexist mate but woman are the worst for breaking toilets. My missus has puled our toilet seat off more than once. She'll lean over towards the basin to clean her teeth while sitting on the loo and of course it pulls the seat to one side. Or she'll kick off her boots or trousers while sitting there and it all goes to loosen the seat. It wouldn't be a big deal but it's one of those pans that fits against the wall with all pipes and access hidden. It seemed like a good idea at the time for neatness and easy cleaning. So it has to come out every time to screw the hinge back on. It's off again now but this time I'm going to use thread seal on the bolt and glue the hinge. So the pan will probably break next time. As for your call out it sounded to me that the lady had tried a little DIY drilled through the pipe and was blaming her poor husband who at the time was having a quiet drink down the pub after a hard day. I would have gone in there, wrapped chewing gum around the screws, tightened them up and wrapped it all with insulation tape and put the floor boards back down. I would have charged £795.21 for the job plus GAT (Glen's added tax) and would have given a no quibble 14 minute money back guarantee. I would have then used the money for a couple of days break in Spain. Am loving the vids, happy new year mate.
Haha, love how you’d approach the call out 😂😂😂 like the sound of that.
Your missus with the toilet seat… grrr yes all that will keep loosening it or even breaking it. The thread seal will
Help, but like you say, if you ever come to remove, it’ll be a pain! But oh well😂 All the best for 2025 buddy’ thanks for the support this year!!
yo
@@willrenyolnds yo yo brother ♥️