ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2024
- ►SUBSCRIBE: th-cam.com/users/Behfor?sub_...
►INSTAGRAM: / behfor
►SUPPORT My Channel: / behfor
Devices used in this video:
►TP-Link Archer A7 Wireless Router:
amzn.to/3dSJz3T
►TP-Link RE220 AC750 WiFi Extender
amzn.to/2AxMlMF
►List of Supported OneMesh devices:
www.tp-link.com/us/onemesh/co...
Related Videos:
► TP-Link RE220 - Setup, Speed Test & more
• TP-Link RE220 - Setup,...
►Testing the TP-Link OneMesh Network [Speed] [Roaming] & more
• Testing the TP-Link On...
►TP-Link Archer A7 - Basic Setup
• TP-Link Archer A7 - Ba...
►The best-selling Wireless Router on Amazon [ TP-Link Archer A7 ]
• The Best-Selling Wirel...
►Asus Aimesh System [Setup] + [Test]
• Asus AiMesh System
If you enjoy my content, please consider supporting my channel!
PayPal Donations : www.paypal.me/behfor
Patreon : / behfor
BitCoin : bc1qd29pzpcr4gpym45eyexpl3q8904fvyrzmjd2xc
Ethereum: 0x0167f6E048E5996d0B67dE38DC8d533a84f67a6F
Litecoin: ltc1qj0f4j2yuucpmgyafuguv3hxmvd976rmqw5xagt
Stellar: GDS34N36NE3ZB5YECWAGUGYGELIDLXS3AOMRP5WMHJ5K3YFCIFRKNZLH
My Amazon picks (my affiliate links): www.amazon.com/shop/Behfo
Disclaimer:
1-Please do not make any changes to your network or Internet connection based on the information in this video. I do not accept any responsibility or liability for any loss or damage of whatever nature (direct, indirect, consequential, or other) which may arise as a result of your use of the information in this video. This video is for educational purposes only. 2-This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission (at no extra cost to you). This will help my channel, so thank you for using my links!
#tplink #onemesh #mesh #repeater #dualband #wifi #behfor #re220 #onemesh - วิทยาศาสตร์และเทคโนโลยี
![OneMesh vs. AiMesh [Whole-home WiFi systems]](http://i.ytimg.com/vi/HpL7MyXrhIc/mqdefault.jpg)
![OneMesh vs. AiMesh [Whole-home WiFi systems]](/img/tr.png)
Great video explaining the limitations of OneMesh. I'm using 4 AX10's, all as wired AP's, and when I saw the new firmware with OneMesh, I was hoping the mesh technology could be used to improve handover between them while keeping the wired backhaul. Sadly no, but at least my question was answered quickly.
Your graphics are great, simple and combined with crystal clear commentary in a simple way is awesome. Thanks.
Much appreciated! I'm very glad you liked the video! Thanks :-)
Thanks Behfor, I recently started watching your videos when I had to configure my router as wireless repeater, I must say, you make amazing videos, really helped me a lot.
You're very welcome and I'm really happy you found the videos useful :-)
Clean, simple and covers all points.
Very helpful Behfor .. Thank You :)
Thanks so much! I'm glad you liked it 😀👍
nice video. i was actually gonna upgrade my main router, and use my TP-link rolder on as one mesh repeater. never crossed my mind it couldnt be done. at least now im free to choose another brand of router
Amazing video, answered all my question I had about OneMesh.
Glad to hear that, thanks 👍
You have a nice style of presentation. Very clear and a little funny at times. Thank you!
Great video! Answered all my questions about OneMesh.
Glad it was helpful, thanks 👍
Excellent video homie, also cool animations, keep up the good work 👍
Thanks! I'm glad you liked it 😀👍
Yes again you answer the question I could not find anywhere else. The One Mesh wifi setup works like the Xfinity Pods where it dynamically selects the bandwidth and you don't get to decide.
Answered exactly what I had in mind. Thank you!
Glad to hear that, thanks 😀👍
Thank you so much for this great video!👍🏼👍🏼👍🏼
I already have a Archer C7 (twin of A7) in the basement and I got Cat6 ethernet cabling done throughout the house. It's a shame that the repeaters cannot connect to the C7 via ethernet. Otherwise, this would have been an inexpensive way of getting a whole house wired mesh network.
Would you recommend using the Deco M4/5 as access points connected via ethernet to the C7?
Very nice demonstration! Thank you very much!
You're very welcome, glad you liked it 👍
This was so helpful. God bless you!
Glad it was helpful! :-)
Thankyou! This was very helpful!
You're very welcome, glad you liked it 👍
Very well explained, Thanks! I was trying to decide between TPLINK AX20 and Huawei AX 3 Pro. Basically because of the Mesh capabilities, I am likely to go with AX3 Pro
Glad it was helpful! Thanks :-)
Your videos are very great, thank you Behfor! Btw i really want to see the "onemesh vs aimesh" video :D
You're very welcome! I'm glad you like the videos! Hopefully soon we get 200 like for the AiMesh vs OneMesh video :-) Thanks
Excellent explanations. I finally found what I did wrong at home. Thanks !!
Glad you liked it, thanks 😀👍
Hi, nice video, can you use two archer units and make them as your one mesh unit...instead of getting mesh node? Is there such a thing or is it capable? Thanks a lot
Great video. Thanks for the info.
Very well explained. Thank you.
Thanks so much! Glad you liked it 😀👍
Awesome video, what is the best range to put the mesh node.
Is it ok to put my node where I get 10-20 % wifi signal strength from primary router. So that I can extend to more place.
Will my node get the full speed?
Thanks for the wonderful video🙏🏻
You're very welcome, thanks for watching 👍
Thank you for the video! I have a one remaining question. Do I have to connect "OneMesh node" directly to the primary router? Or is it possible to connect to another "OneMesh node" and create this kinda long line? (e.g.: Router node (connected to the router) node (connected only to the node))
Your presentation is awesome
Thanks so much 😀👍
Can you demonstrate adding 2 re300 to increase the mesh coverage?
I really loved it ... Great informative video. Thanks
Glad you did! Thanks 🙂👍
helpful video, thanks dude!
Glad you like it 👍
You actually can create a whole network using older routers.
But ofc, it wont be a mesh system at all.
You'll have to connect them using Ethernet for backbone and use as a separate Access Points.
If done properly - the same Name but different Channels, proper (not the highest one) amplification and disctribution actoss the home, you'kk achive a good coverage.
In 5GHz devices actually can migrate between access points on their own. So it is reccomended to enable 2.4 GHz point only on a central router, and use only 5GHz on others.
I have done this at my home and it works great.
Had the same issue with it - wish the OneMesh worked with multiple routers too, instead of it being limited to a router-repeater set. Shame. I'm sure the software and hardware is already there in all the routers. Just a question of their will, to enable it.
I read in a TP-Link video that the system is not designed for this. Maybe the hardware is really not there.
Great video, thanks! Can you please elaborate why I can't use other OneMesh routers as satellite devices? I have Archer AX23 as main router, and want to buy 2 Archer C64 for my different rooms. I was going to buy them and connect but decided to watch your video first
Thank you ❤️
What do you think about Xiaomi repeaters and the new mesh or AX1800?
Thanks a lot . Nice Video . Question : In order to install and use a Mesh with the Router , don't you need to upgrade the router's firmware? Or router supports mesh directly from the box (talking about an Archer C7) . Thanks again
Hi, I'm not too sure about the C7, however it's recommended to have the latest firmware installed.
Hello, please, have you already carried out the meshed configuration on the TP-Link VR600 router?
BTW using a Gb Ethernet back-haul is game changer in our home along with the ASUS's very flexible guest network to setup a segmented WiFi network to safely have all my IoT devices connected and separated for my intranet along with iPhone's and iPad's which don't need intranet access either just internet - network isolation is a wonderful thing :))
Yes I agree with you, Gb backhaul is really great! Also that's a smart way of connecting your smart devices to your network :-)
Thank you sir. For tjis vodeo.
You're very welcome 😀
Thanks for the great info.. need help...so should I get A7 over C6? For mesh setup..thanks in advance
The c6 is good for most people
Thanks, is it possible to connecte nodes on each other so they communicate between each other like the Deco Mesh systeme ? Also it will be nice if you could make a comparaison between Deco Mesh and OneMesh systeme.
Hi Behfor,
I have watched most of your videos and I must say you make great Videos. In Your Video, Content coverage is amazing. I appreciate all your efforts make so much informative videos.
All the details you mentioned are very helpful & useful. Recently, I have seen your both Videos related to TP-Link OneMesh and I have 1 below query:
I have Router Archer C6 (Primary) & Range Extender RE305. I established OneMesh Network, Now what if connect another tp-link router (as Access Point) to Primary Router Archer C6 through LAN Cable?
Hi and thanks! You can connect an AP yo your network but that will not participate in your OneMesh network. You can manually create wireless networks on the AP though.
Your video just saved me from buying another router to try and make a mesh connection at home. I have been trying to find out wether one mesh will work with another router or not and couldn't find information about it. It is sad to see that onemesh would work only with repeaters and I can't make an access point for example and set up one mesh.
I'm glad this video was useful for you, I can't agree more, I think that's something that TPLink should fix, it doesn't make sense at all. Thanks.
So we can't use wireless router with Deco series?
Can you please recommend if to increase wifi coverage in my house should I add RE450 wifi range extender or RE300 Mesh wifi extender? I have archer A7 router
Well, I have not tried either of them so unfortunately I cannot tell you which one has a better range for sure, but in my experience usually when the device has external antennas, the range is better, but as I said I cannot answer your question because I haven't tested those devices. Thanks.
Hi i have a Archer AX73 in the living room, if I get an TP link extender RE505X, am I able to roam using same SSID in masterbedroom?
Hi, will you be doing an update on the Onemesh system explaining how it works? Has anything changed? Thank you.
Hi @Behfor,
I have recently started watching your video and I liked it too much. You are really doing great.
You have made a Video with ASUS router for the Dual WAN feature.
- Could you please suggest other Dual Band Wifi Router supporting Dual WAN and Mesh Technology?
- Is there any other workaround to have Dual WAN setup on TP-LINK routers (I am using TP-LINK Archer C6-OneMesh)?
Thanks in advance.
Hi, thanks and I'm glad you liked the video :-)
If your router doesn't have the dual-wan feature, a possible workaround is to install a third party firmware such as DD-WRT that has that feature! Of course that depends on whether the router supports that firmware or not, and whether you are willing to take the risk of installing a custom firmware or not, because it might void the manufacturer's warranty and if something goes wrong it can brick the wireless router!
What would be the best device to extend and create a safe network in a hotel room (using hotel free wifi - cannot access any LAN port, should be configurable by wifi only)? I tested a small GL.inet nomad router but it looses the connection too often. Thank you
I just bought the Archer VR400 and I'm having issues with connectivity. I have two RE230 extenders with OneMesh connected. Are these devices compatible? Is there anything I may be doing wrong.
I used to have an Archer A7 in place of the VR400 and it worked great.
what i ask is cna i use archer c7 with a c50 for oculus quest airlink stuff
Is this compatible with my 802.11r fast roaming compatible unifi AP?
What’s the difference between TP Link one-mesh and the Deco systems? Which one is better in you opinion?
Hi, great video, one question though. Do you know if the wireless backhaul runs on same channel as the wifi network or different. I have archer c6 + re200 and the backhaul is on same channel. Do you think having backhaul on a different channel will improve performance ? I can't find a setting for this.
Hi, that's the limitation of the mesh network. Basically a wireless device can only use one channel for each radio at a time. If the repeater is connected to the main router using 2.4 GHz CH 1, it can only rebroadcast on 2.4 GHz on the same channel. That's why using access point to extend the WiFi is much more professional, or even using repeater with different radios for backhaul and clients. Thanks.
@@Behfor Thanks. What I have seen is that in one mesh setup tp link router broadcasts hidden ssids which I think is used as backhaul by the tp link extender.
On my home onemesh network I had to disable the 2.4ghz band because my devices connected preferably to that band and, with that, the speed was reduced a lot. When I turned off the 2.4GHz band all devices obviously started to connect with the 5GHz band, with excellent speed. I was intrigued by this. I suspect that the devices give reference to the strongest signal and not the fastest. Here's a tip for those who are having speed problems with the onemesh network: try disabling the 2.4ghz network. In my case, living in a 3-bedroom apartment (90m2), the 5ghz band, using the ArcherAX10 router and the RE500X repeater, got the job well done.
It looked like you could name the 2.4 and 5.0 networks as different ssid. Its helpful so that my outdoor devices (camera garage opener, etc) get better signal with 2.4 and inside the house 5.0 is my default for phone and tvs. But Im not sure if its possible on tp. Any thoughts?
@@drmiteshtrivedi Yes, it is possible. Just turn off one mesh option and you will have two separate bands with different names, being one 2.4ghz and other 5ghz. Cheers.
I love your persian accent bro😁
Not sure vat you mean!
Hi, I am on Tp link c7 router and traditional type of wifi extender (not mesh) TL WA860RE. Will Mesh wifi extender do better job than wifi extender?
is this better than using the deco mesh wifi system?
Any video on onemesh vs deco ?
I wondered why I was struggling to set up Onemesh, seems having a non TP Link router as my first one cock blocks the setup
@behfor If I use multiple Re220 devices, must each one be within range of the main router or just within range of another Re220? Meaning..can they be daisy chained?
When you use these "extenders" as part of the onemesh system do they lose or cut speed like the old school extenders did?
You may wanna watch this video where I tested the OneMesh system:
th-cam.com/video/ojnBVDbFhGw/w-d-xo.html
If you had an accommodation dorm in a university, what wifi mesh system would you recommend for such a big setup?
It will need to cover about 60 rooms spread out between 4 buildings. Distance between each building is less than 50 meters.
Unfortunately I can't recommend a fully mesh system for such a setup. Some centrally managed APs with wired backhauls would be a better solution.
@@Behfor I would love to have a permanent hardwired wifi system. Unfortunately, we aren't allowed to drill or run any cables. So wifi mesh seems to be our only option.
How many one mesh range extenders can we connect on the same network ?
In setup you indicate you must connect BOTH radios to the mesh, 2.4 and 5 gig, what if the 2.4 gig radio has been turned off and will never be used, therefore it is not available, can the mesh node still be installed using only the 5 gig radio ? thanks
thanks
You're very welcome
does onemesh work when in using a router in a access point mode??
Can the node be connected as an access point instead of being connected by wifi only?
Nice vid. One more thing that is a bit confusing is the fact that to build a OneMesh network you need an AP and repeater which support this technology. But... the repeater itself also can act as an AP and since it allready supports OneMesh system then it renders another question - is it possible to build OneMesh network based only on repeaters (one of them in AP mode), or not? :) I'm not able to find answer to this question on the internet.
Did you find an answer to this question?
@@sum-earth yes. Unfortunately the answer is "No" :/
It's should be able to, but TP-Link want you to buy their router too, it's capitalism at its best.
I have a question and I really need your help…are onemesh nodes connect to each other or only to router ?? As I have a very big location and need to find internet solution to cover it with internet
I have an Archer C7, but seems only the V5 is Mesh and others are not.
How to find if my router a V5 mesh version ?
Hi pls clear my daubts as i saw somewhere.. Can i use this archer a6 as wireless repeater or wireless ap with some other brand router to increase range, i had used old tp link routers witch was having option of wireless bridge where wifi survey option was available to scan and connect near by wifi
Hi, this Tp-Link Archer A7 in this video does not have the repeater option, but you can use it as an AP to extend your WiFi range. Thanks.
@@Behfor thanx
You're very welcome 👍
I have the AX55. I think it's a little stupid that if I wanted to add an extender that I could not use gigabit Ethernet to do that. Seems like that would be better.
What is the best mesh network that support lan between the nodes and under 100$ per node ?
Archer c64 with easymesh
Can i connect another re220 on another re220 as mesh?
I've bought one of these, does anyone know if I can use it with my 'personal hotspot' on my phone or not?
This channel looks like if DiodeGoneWild made the pictures, ElectroBOOM was speaking and theory was covered by LinusTechTips.
How many extender connect in one mesh in tp link one mesh router
Nice video, thanks. My disappointment is that I cannot connect the one mesh node to the router with Ethernet. I am using an EAP225 with my AX10 as a stand-alone with different SSID and Password, and connected by Ethernet. I’d like to convert to mesh. Seems like I should be able to.
I agree Doug. Having a wireless network where all APs work in unison and have a solid cabled connection back to a master device should be the design goal of these systems. You'll get the best performance that way. Using Wi-Fi to talk between the nodes should be an alternative method for people not willing to run cable. It should be advised against. Not the default configuration. It's backwards the way they've designed this.
I have a TP-Link Mesh Router Archer AX90 AX6600 and if buy Mesh 1x Deco X90, Should i connect the Router and Deco by Wire or it can work wireless. Please advice
Will this work using a different router like the router provider by the ISP or do I really need to get the Archer A7 for this to work?
OneMesh is only for TP-Link devices, so everything has to be TP-Link to be able to participate in OneMesh. Please check the TP-Link website for the list of supported devices.
Now if your Wireless router is not supported you might still be able to connect a TP-Link extender as a repeater to extend the range but unfortunately not as an OneMesh node
Thanks.
@@Behfor I see thanks! My hunch was right. Cause The router was TP-link. Glad I asked first to confirm and I did not order the sale I saw. Thanks for the answer.
You're welcome!
interesting video thank you Behfor :) I would like to see a video on how to setup 2 x ASUS DSL-AC68U routers to use AiMESH it can be done but I just cant get it to work :(
Thanks for the idea! Hopefully I'll get more support for the channel and will be able to bring more devices for different projects. :-)
Hei. I don't know if you checked the compatible list of routers. For DSL-AC68U there is a mentioning to be used as primary router:
"5.DSL and LTE WiFi modem routers that support AiMesh technology are only capable of working as AiMesh primary router, not AiMesh node."
www.asus.com/Microsite/AiMesh/ea/
So we have to connect both bands to create onemesh? Does this mean the router and extender have to be in the same platforms, dual bands = dual bands, triple bands = triple bands, can't we have single band onemesh?
I have two re 220. Can we use mesh system?
You need to have a router that supports onemesh, then you can use your re220s as mesh nodes. Thanks.
should cable backhauling works for this?
Unfortunately wired backhaul is not possible in OneMesh, Thanks.
Please make video comparing onemesh vs AI mesh
Hi
Can I use a repeater as my main router?
Hi, if you mean in a OneMesh system, the answer is no. Thanks.
I have TP-Link wifi powerline adaptors with wonder if it still uses wifi to connect with each other, or use normal power socket to do its data transfers for internet?
If you have any information on this let me know, before i buy TP-LINK AXE75 AX5400 router for onemesh seamless wifi feature.
Hi
Videos are perfect
Please make a video about ASUS AC88U
And then compare it with AC68U.
Thank you
Thanks so much! Unfortunately I don't have the AC88U but hopefully, we can get more support and bring more routers to the channel. Thanks
Can we create a mesh network with another Archer A6? So, basically two A6 routers end up creating a mesh
This question was answered in the video (3:10)
You are awesome bro. Keep it up.
Thanks so much 😀👍
Can I make a mesh node between two TP link devices, one which is currently use as a repeater? In other words, if I have a router (brand X) and a TPlink RE655 connected as a repeater, can I add a 2nd TPlink to the first one and add it as mesh or as a repeater?
Depends on what 2 tp-link devices are. If they are both repeaters you can't make a onemesh network with them, you need to have a tp-link router for that, however you can still use both of them as repeaters with your brand x router.
Tp-link now using EasyMesh. Mesh between router is possible.
Evening. I am confused. Does this mean that I cannot use a tp link one mesh extender to my Tenda N300 F3 Fibre router?
Hi, you should be able to connect it as an extender but not as an OneMesh node! They are 2 different things.
I have test onemesh for online gaming. sadly the ping is very unstable.
excluding archer, it works fine with AP only?
3-4 AP in mesh mode?
You need to have a supported OneMesh router for the onmesh network to work. Unfortunately you cannot use the extender in AP mode to create an OneMesh network. Thanks
@@Behfor Why please?
@@LukyVala you should ask that question from TP-Link, because this is how they designed OneMesh!
Behfor! Thanks for the video. I have a problem, maybe you can solve. When I use the RE220 as a mesh node, it doesn't detect the 5ghz band of my archer a6 router. As a repeater it does. I've upgraded firmware and reset the device. Any advice?
Thanks, I've seen this behavior when one of them is a US version and the other one is a Europe version. That's because some 5GHz channels that are allowed in US, are not allowed in Europe.
@@Behfor I'm in neither! India 😭
It has nothing to do with where you are, im talking about the devices you have. Just try to use one of these channels 36, 40, 44 or 48 on the router and see if the node can find that. These channels are allowed almost everywhere.
@@Behfor Alright let me try. Thank you!
@@Behfor Didn't work :( Guess I'll wait for TP link's official response. Thanks anyway :)
Hello, how many tplink devices I can connect to the tplink one mesh system, just like I can 2 tplink devices connected to the tplink c7 router one mesh system? Or I can Put just one?
Hi, I'm not sure what's the maximum number of devices you can connect to the onemesh system, however, you can definitely connect more than one. 👍
Behfor can I connect two tplink c7 with each other, to work together on the onemesh system?
As I said in the video unfortunately no
Hello, I am am having 2 same model routers spreading wifi from different ISP on opposite corners of my apartment. As concrete is too thick I have coverage of both routers only in the middle. If I buy any 2 piece deco pack, should I be able to configure them separately to the 2 different routers? I mean, are they paired to each other or I can use them 1 by 1 on different locations and networks respectively? Sorry for the dumb question, but those guys in the store said it will not happen... somehow I hope they were not enough informed.
So onemesh is basicly wifi mesh with out some features
wait... so I can't use another router for OneMesh?
Like If i have 2 Archer A6 and want to make it OneMesh: 1 as router, 1 as access point
Yeah. Don't understand their thinking here. Must be some stupid business decision to make more money.
can you add another Archer a7 ?
The answer is in the video!!!
Thank you very much for this great video.
Is it possible to connect Second RE220 that fare away from Main router. and how?
Thank you.
Hi, the 2nd RE220 could be connected to the 1st RE220 (daisy chain), not very much recommended but it should still work, thanks.
Are you sure the back haul cannot be ethernet? I see an ethernet port on the RE220.