Nice! What springer frontend did you use? What is the length? I'm working on my bike and not sure what length to use in front . Greetings from Daytona Beach, Florida.
Nice bike. I m also working on my EVO and want to replace the front end to Springer. What size is the springer you used? Thank you. Greetings from Chicago.
I never got a response. Tc bros have a 15% store wide discount ends tonight, was thinking of maybe pulling the trigger on a 2 under Springer to play it safe. I wonder if a 4 under might make the front dive down to much. I've got a 98 fxstc.
@@MrBronek1975 I didn't buy it for fear of the wrong height issue. I got a response today from another utube video where he used a 2 under. So I'm guessing that the bike in this video is a 4 under compared to the other video. Wpk-customs.com has a video of a softail with the 2under Springer. I'm too late for the 15% discount, but they'll do it again for the xmas holidays. I can wait.
@@MrBronek1975 thanks for the info, I'll take a look. There's a guy on my local CList got a new HD Springer for 2k. Lotta mula! Hell, for that money I can buy a 70's 650 triumph chopper going for $2800 on Clist near me.
TERRIFIC BUILD ! !
NICE , CLEAN , L O W , & UN - CLUTTERED ,
GREAT JOB !
Nice chopper.. loved the combination of engine power and kickstarter gearbox 😉👍
uper nice build, TC and still looks so old.
かっこいいですねー
日本人は旧車にこだわりすぎるので意見は色々意見は分かれると思いますが
旧車は旧車で良さがありツインカムはツインカムでまた違う良さがありますよね!
自分はパンに乗っていますがもう少しパワーが欲しくツインカムのキャブ車が今は欲しいです笑
tcでキックって本当にかからないんですよね〜
結構セッティングが甘いとか、振り上げた足が大袈裟とかいう人もいますが、そうじゃなくて人力でかけるのに限界があるというか…
思いっきり蹴らないとかからないですし、かけられないんですよね!
自分もキック入れてましたが、過去にtc88でキック入れてる人から、文面ではあるもののレクチャーしてもらいましたが、それでなんとかかかるようになったって感じでした!
その人はキックオンリーでも行けそうなぐらい使いこなしてましたがwww
Just cooooool. The good old days
TC88ってのが良いね。ショベル、エボはみんなやってるし。
you my brothers are artists
Nice! What springer frontend did you use? What is the length? I'm working on my bike and not sure what length to use in front . Greetings from Daytona Beach, Florida.
tc88で綺麗な3拍子が出るんですね!
お金相当かかりますか?ボクもやろうかな。
tc88はキャブもありますが インジェクションの場合実費は十数万です(パソコンの載せ替えと設定は自分でやる前提 自分はアイドリング音だけならプロに任す必要は全くないと思う キャブのよりも簡単で手間かからないです) とは言え 拍子はでますが音質はやっぱ違います 自分の体験からはこれをやるより そのままバイクを売ったほうがいいかもしれない やってもそのうち本物を欲しくなる この動画もメルカリの出品用動画 キャブの88だそうです 間違ったらごめん
好み😃ステキ👍
HSRでここまでの音は感動しました。
エンジンボディはくすんだ色合いですがもともと、メッキパーツでしょうか?それとも無垢アルミでしょうか?教えて頂けると幸いです。
Nice build
かっけー!
はじめまして、キックはどこのブランドですか?
Wear any leather biker jackets????
Beautiful motorcycle, what is the name of the foot white supporters? Thankssssssssss
速そう
Nice bike. I m also working on my EVO and want to replace the front end to Springer. What size is the springer you used? Thank you. Greetings from Chicago.
I never got a response. Tc bros have a 15% store wide discount ends tonight, was thinking of maybe pulling the trigger on a 2 under Springer to play it safe. I wonder if a 4 under might make the front dive down to much. I've got a 98 fxstc.
JukeBoxHero 's. Thanks
For the info. Let me know what you bought and how it turned out. I’m hoping 22” should be enough.
@@MrBronek1975 I didn't buy it for fear of the wrong height issue. I got a response today from another utube video where he used a 2 under. So I'm guessing that the bike in this video is a 4 under compared to the other video.
Wpk-customs.com has a video of a softail with the 2under Springer.
I'm too late for the 15% discount, but they'll do it again for the xmas holidays. I can wait.
JukeBoxHero 's if you’re looking for a nice vintage front end, Throttle Addiction carries a nice replica of old big twin Springer. Check em out.
@@MrBronek1975 thanks for the info, I'll take a look. There's a guy on my local CList got a new HD Springer for 2k. Lotta mula! Hell, for that money I can buy a 70's 650 triumph chopper going for $2800 on Clist near me.
しぶすぎる
まるでショベルやん!
?????
Bm k
Ffgh
ここまで金掛けるなら・・・。最初から旧車を。
旧車にはない良さもあるからな、壊れず速さも出せるやつが良かったのでは?
カスタムも悪くない確かに誉めたいところだが、ツインカムはエンジンのサイズからしてやっぱり微妙だな、
あとTCからはフレームと角度もかなり変わってるしね、エボソフテイルやショベル以前にした方がもっとしっくりくる、全然違うよ??
外観はいい感じなのにエンジンが残念!!
@t jim 88ってとこが外観とつりあってない。ビンテージっぽいのにインジェクションみたいな・・・
@t jim ああ、そうですね。角パイ、ソフテイルフレームでしたね残念!!
ベルトドライブ🙅♂️ダサ杉 オープンプライマリーにしろよー セルモーター要らん
オメェーのバイクじゃ無いんだから黙ってろよw
@@ujymw 自転車しか乗れないガキは黙ってろ
楽でいいじゃん♪
人の趣味にいちいちきしょこめするおっさんの方が数倍だせーっての理解しろカス
@@マーシー-q2p もう少し分かりやすい日本語使おう!もっと勉強しなさいね
クソガキ君