Happy new year! I have been following the build on your Instagram. Super cool seeing this thing come to life! You have a gift, this and the mustang are true works of art in my eyes :)
KISS. Just because the engine is in the way doesn't mean you can't add a bar. As long as the pivot points are correct... the bar doesn't have to be straight. Also the beam can be rubber mounted to accountfor any geometry fudging and drivetrain shock. The axle can flex a bit and return to straight.
Cool build. Looks like you did a lot of work fabricating that chassis. The car has a nice stance to it. It's going to be a blast to drive with the new suspension 😁
I do honestly think that with a couple of braces would work. You could make a curved armature that bolts on near the mounts to a center rod near the axle and brace it from there? I'm not an engineer but I do like the ATV style straight axle and it would be great for slides haha. Excited to see the next steps happen!
Good idea about the new differential design. Can you alter the final drive ratio? We just got back from a cross continental trip of 6400 miles from Rama near Orillia by way of Santa Fe NM, in a 1984 VW vanagon I put together. We saw some awesome projects in the Barrie XLStainless shops. Congratulations to you and your beautiful bride on your marriage and west coast relocation!
I will be able to change the final drive ratio by changing the sprocket size, just like a bike! I’ve chosen to reduce it by 25% from the motorcycle’s factory gearing which will give me a lot more low end torque which will be necessary with the added weight from the bike. I considered reducing it more but at 25% reduction it will allow for a theoretical top speed of 150mph and hopefully not revving to the moon while cruising at 70-80mph. Sounds like a fun trip! Thank you!
@@Kylescaife Simple but elegant solution. We had a few mechanical adventures, mostly due to an ignition coil shorted out by an aftermarket tachometer, and fuel sender inaccuracies. Otherwise the $100 39 year old waterboxer engine performed flawlessly. We didn't take the diesel powered van this time as diesel prices were astronomical. Your Dad mentioned that while you hadn't been on TH-cam there was Instagram.
I posted a video about cantilever suspension in the past, however I’m definitely more educated now so maybe I’ll do another. The problem is that I am far from an expert on suspension geometry and stuff like that so I think there would be people who were a lot better than me at explaining stuff haha
@@Kylescaife I mean, that's what a lot of old school guys did back in the day for harley trikes, but a chain driven dif IS a helluva lot cooler, and a bit reminiscent of prewar chain drive racecars
Because a Hayabusa is a way more desirable engine than a Honda Magna lol. And I want to run a chain drive to be able to swap out sprockets easily and change gear ratios.
Ain't no hill for a stepper brother! You got this !!! Amazing job!!
Awesome, thanks for the update, it's great to finally see some progress on the Beetle! 😀
Glad everything is still in the shop!
This is way cooler than i expected
that thing is rad
awesome build, ill be watching for your next video.
Happy new year! I have been following the build on your Instagram. Super cool seeing this thing come to life! You have a gift, this and the mustang are true works of art in my eyes :)
Thanks a lot man! Happy new year to you as well!
I've been dreaming about this day.
Great job Kyle! We're proud of you back home in Ontario.
excited to see the end result!!
Radical as always! Been following you for yrs definitely gonna grab a shirt
KISS. Just because the engine is in the way doesn't mean you can't add a bar. As long as the pivot points are correct... the bar doesn't have to be straight. Also the beam can be rubber mounted to accountfor any geometry fudging and drivetrain shock. The axle can flex a bit and return to straight.
Cool build. Looks like you did a lot of work fabricating that chassis. The car has a nice stance to it. It's going to be a blast to drive with the new suspension 😁
Been patiently waiting glad to see u and urs are good and the beetle still moving forward
Wow man, that is an amazing project. The engineering is fantastic.
I'm gonna go ahead and approve.
I do honestly think that with a couple of braces would work. You could make a curved armature that bolts on near the mounts to a center rod near the axle and brace it from there? I'm not an engineer but I do like the ATV style straight axle and it would be great for slides haha. Excited to see the next steps happen!
Good idea about the new differential design. Can you alter the final drive ratio? We just got back from a cross continental trip of 6400 miles from Rama near Orillia by way of Santa Fe NM, in a 1984 VW vanagon I put together. We saw some awesome projects in the Barrie XLStainless shops. Congratulations to you and your beautiful bride on your marriage and west coast relocation!
I will be able to change the final drive ratio by changing the sprocket size, just like a bike! I’ve chosen to reduce it by 25% from the motorcycle’s factory gearing which will give me a lot more low end torque which will be necessary with the added weight from the bike. I considered reducing it more but at 25% reduction it will allow for a theoretical top speed of 150mph and hopefully not revving to the moon while cruising at 70-80mph.
Sounds like a fun trip! Thank you!
@@Kylescaife Simple but elegant solution. We had a few mechanical adventures, mostly due to an ignition coil shorted out by an aftermarket tachometer, and fuel sender inaccuracies. Otherwise the $100 39 year old waterboxer engine performed flawlessly. We didn't take the diesel powered van this time as diesel prices were astronomical. Your Dad mentioned that while you hadn't been on TH-cam there was Instagram.
Or add a watts link with one bar forward and one rearward with the center pivot on the axle centerline.
Hell yeah bud keep up the hard work 🍻
I have asked before but im curious if youre doing it the same way. what do your bell cranks pivot on beariing wise?
Its beautiful good job dude 👏 👍 👌 🙌 ❤️
Would you talk more about your suspension set up not just the bellcranks but the overall geometry and how you tackled figuring that?
I posted a video about cantilever suspension in the past, however I’m definitely more educated now so maybe I’ll do another. The problem is that I am far from an expert on suspension geometry and stuff like that so I think there would be people who were a lot better than me at explaining stuff haha
Epic! 💯
Right on
Are you going to put any fender on it?
Nope!
You could run a solid steel rod for an axle, like a giant gokart axle, instead of a tube, it would at least be stronger
Wouldn’t be strong enough I don’t think! I’m doing an IRS set up!
@@Kylescaife I mean, that's what a lot of old school guys did back in the day for harley trikes, but a chain driven dif IS a helluva lot cooler, and a bit reminiscent of prewar chain drive racecars
At 17:15 what is that widebody thing in the back. I've seen pretty much everything you have done here or on Instagram bit never seen that.
That may or may not be a 66 Mustang on a C7 Z06 drivetrain 👀
@@Kylescaife lol
@@Kylescaife another mustang build?
I would totally buy this and race the hell out of it.
You can if you want 🤷🏼♂️
@mkfabworks if you are for real , I am. Just saying
@@sellhammer1 Haha message me on Instagram. @mustangkyle
watts link it. Center pivot on the solid axle
I’m building IRS for it now lol
How hard would it be to make this street legal?
It already is haha. That’s the only reason I have the Beetle body.
P r o m o s m 😂
The chassis is way to weak to handle the physics of speed and weight with such a pedal car frame!??! Build a stronger one and lift him a bit more up!
@@SuperOrbiter Lmao it’s a chromoly chassis specifically designed for this purpose. It is plenty strong 😂
We want content not speeches!!!! Your about to lose me..........
Haha I’ll make whatever content I want dude. If you’re unhappy with it then you can leave and you will not be missed 🤷🏼♂️
Why didn't you just go with a Honda Magna shaft-drive with Drive Gear Differential & Swing arm, along with a thicker axle. Problem solved.
Because a Hayabusa is a way more desirable engine than a Honda Magna lol. And I want to run a chain drive to be able to swap out sprockets easily and change gear ratios.