Additional undocumented settings. To get to them you need to press the "Mode" button and keep it pressed for 7-10 seconds. First, there will be a switch to the parameters in which the alarm is tuned after each hour, alarms, melodies, etc., DO NOT RELEASE the BUTTON, keep it pressed, after a few seconds there will be a switch to these settings: 1) On / Off brightness control depending on the light in the room. 2) Setting the sensitivity of the photosensor. 3) Temperature units: Of - degrees Celsius, On - degrees Fahrenheit. 4) Correction of temperature readings, 1 unit = 1 degree. 5) Time format: 12h / 24h. 6) Setting the information displayed: 1 - ALL (time, date, day of the week, temperature), 2 - time for 15 seconds. then the temperature is 3 sec, 0 - time only. 7) Automatic change of modes of a ring of light-emitting diodes. Values from 0 to 84. 0 - do not change, 1-84 - change after 1-84 minutes. (That is, if you set the value to 1, the LED ring light mode will change to another one after 1 minute, if you put 5, then the mode will be changed every 5 minutes.)
Hold down the setting button and parameter 12 will display "of", change it to "On" and you will have degrees F displayed. Switching between 12/24hr is another setting, I`m not 100% sure which so would rather not say, sorry :(
Additional undocumented settings.
To get to them you need to press the "Mode" button and keep it pressed for 7-10 seconds. First, there will be a switch to the parameters in which the alarm is tuned after each hour, alarms, melodies, etc., DO NOT RELEASE the BUTTON, keep it pressed, after a few seconds there will be a switch to these settings:
1) On / Off brightness control depending on the light in the room.
2) Setting the sensitivity of the photosensor.
3) Temperature units: Of - degrees Celsius, On - degrees Fahrenheit.
4) Correction of temperature readings, 1 unit = 1 degree.
5) Time format: 12h / 24h.
6) Setting the information displayed: 1 - ALL (time, date, day of the week, temperature), 2 - time for 15 seconds. then the temperature is 3 sec, 0 - time only.
7) Automatic change of modes of a ring of light-emitting diodes. Values from 0 to 84. 0 - do not change, 1-84 - change after 1-84 minutes. (That is, if you set the value to 1, the LED ring light mode will change to another one after 1 minute, if you put 5, then the mode will be changed every 5 minutes.)
Thanks!
А можно на русском?
I have seen how many kits you have done I doubt I will ever catch up to you.great job fellow old guy
Great tutorial thank you, I have just ordered my LED Electronic clock V2.... :)
Very cool project 👍
Nice soldering there
Let this style videos come bro. 👍
can it be changer to standard time and not military time?
beautiful clock sir i like what price i want bye please give answer
Why did you have that one diode so far from the PCB and not flush to the board?
IS AN THERMISTOR NOT DIODE
'
nice wheel LED clock kit...
i see that clock kit have a problem with LED stay on while spin at 937 to 944
Hi guys
are led have polarity ? long wire fit inside or outside ? I see outside on video; it's right ?
Thanks
Tipiak00 short is negative
which software you use to make fast video? Plz reply me name
Nanda Kamble I just use Windows Moviemaker which got a tool to let the film run faster. I guess CC also use WMM
just find the option of video speed in your current software
cool, Like all your videos
CRAFTRIX World
que buen video me encantó estubo cool!!! sigue haciendo está clase de videos :D
I like It
Can the temperature be set for Fahrenheit, and time to am/pm?
Hold down the setting button and parameter 12 will display "of", change it to "On" and you will have degrees F displayed.
Switching between 12/24hr is another setting, I`m not 100% sure which so would rather not say, sorry :(
What to do if we found our clock is running faster than normal clock in this project?
Please guide me
meet thakor good
where we get this components?
how can i get these material to my home
thank you
Mobile signal increase tip pls suggest me booster or antenna
awsome ☝👌👌
Can I get those on taobao?
Anyone know the id of the light sensor, was missing in my kit so like to order a couple
I reckon they are all the same mate, so just type light sensor on ebay and it will come up for like 1 or 2 bucks
Do you have the Aurdino code of ic STC15W4018as
This is not as easy as it looks, mine keeps beeping and showing EOR3 I can't figure out whats wrong.
Check and re-solder your photo resistor. Replace it if necessary.
Eor3 means it either isn`t welded or not welded correctly.
Where can I get a list of the error codes? Mine is flashing "Eor 1".
where we get the components
How to make a metal detector?
have you taken any croes in soldering
Пдскажите пожалуйста. Почему при отключении питания сбрасывается время и дата. На контактах DS1302 1 и 8 есть 3,2 В.
NICE BRO!
Instructions for the clock:
files.banggood.com/2016/datum(English).zip
creative channel: Did You Have ANew Soldering Iron?
Bhai ye sab saman kaha se milega
how to get 12 hour instead of 24 hour Please.
how u will dump the programmer in ic
かっこいい
Where I can buy this kit ?
bayu yulianto qắzq
nice
super
լավնա☺☺
You will make small tv
where can ibuy one??
رائع
.
vorrei sapere dove acquistare io prodotto
i liken this
Nazrul Islam
i liken this
'
yeaa me, toooo...
i like that rotation clock kit
mu bueno
how to make metal detector????????????????????????????
ราคาเท่าไร ส่งยังไง
👏👏👏👏👏👍👍👍👍👍👋👋👋👋👋👋👋👍👍👍👍👍
hala cara membeli led elektronik clock 2 di mana
Nama nya jam apa ya, harga berapa itu?
8:40
I Bought This But Dont Have Soldering Iron😂😂
HOW TO DO?!?
HOW TO DO?!? Use soldering ladle and a blow torch....
HOW TO DO?!? I have soldering iron but I can't buy this
Use fevi quick
corona virusss
second
ဘယ်မှာဝယ်ရမှာလဲမသိလို့ညွန်ပြပါလားအကိုရ
pirat
how to make metal detector?????
Crazy Guns
how to make metal detector?????
'
hi CG...
resistor wire is a part of magnetable
เปิดโลกกว้างสำหรับผมเลยขอบคุณไอเดียดีๆจากคุณครับ