Thank you. I have been searching for a video that shows me how to set up turn signals. Believe me, there are a ton of them on TH-cam. They were too confusing and also it's probably because they were a little too complicated (for me to follow). Finally, you cleared up everything and with this video everything worked perfectly. Even your (pencil) drawing for the wire connections helped me alot. Whenever I made a mistake I only had to look at your diagram and everything became clear.Thanks so much.
Thinking of doing this but with a 5ah Makita battery and a buck converter to put out 12v, but principle is same for any drill battery I think. Most people have em, mine as well use em
@@Eattrvlroll nice definitely! I am fairly confident that I will be coming out to the last mile group ride. If you are going then we can exchange then!
I still have the bikes, I just haven’t had time to make content on them because of my new work schedule. I’m hoping to do more bike stuff again. I’m glad my video was able to help you out.
For some reason I can’t share it. Search Amazon - Talentcell 12V Rechargeable Lithium ion Battery Pack YB1206000, DC output for LED Strip and CCTV Camera, 11.1V 6000mAh Portable Li-ion batteries with AC/DC 12.6V 1A Charger, Black
My e bike (ANIIOKI AQ177) already has rear turn signals built into the tail light with a switch from the manufacturer. I want to add front turn signals . Can I splice into the existing wiring to add them?
👍🏼. Just splice in the extra two lights the same way. I didn’t do it only because I lost one of the lights at Home Depot while looking for mounting brackets to work with it 🤦🏻♂️
Sorry about that, I thought I had included it in description. I’ll add it there too BlyilyB Motorcycle Blinkers... www.amazon.com/dp/B07GZLN7L7?ref=ppx_pop_mob_ap_share Motorcycle Headlight Switch,... www.amazon.com/dp/B07JLCSTNX?ref=ppx_pop_mob_ap_share Talentcell Rechargeable 6000mAh... www.amazon.com/dp/B00MF70BPU?ref=ppx_pop_mob_ap_share TYUMEN 50FT 12/2 Gauge 2pin 2... www.amazon.com/dp/B08MF7BN8H?ref=ppx_pop_mob_ap_share (Real 18AWG 43x2pcs Copper... www.amazon.com/dp/B072BXB2Y8?ref=ppx_pop_mob_ap_share
The battery lasts quite a bit. I use it to run my headlight as well. I haven’t run it down till it died, however, I’ve been on night rides (using the headlight) for about an hour and still had plenty of juice left by the time I got home. Since I’ve had the battery pack, I’ve only charged it twice so far.
@@Eattrvlroll getting ready to add side flashers as well :-) front and back also figured out the taillight problem I'm just using a push on/off button to toggle the brake light as I need it works great
Awesome video dude!!! Im in the UK and just wondering how will i know which indicators to get so i dont need the flasher relay? Going to get this on my bike asap :)
I don’t see it being a problem. Instead of using a DC connector, you could wire it up to a 3 pin connector but then you’d have to splice in the headlight or taillight.
Hi there, I've been trying your method and unfortunately I'm it's not working out for me, here's what's happening, I got all the connections as you mentioned, I turn on the right side lights and it works then I try the second side but it doesn't work :( Edit: turns out that the blue wire on the switch was the (off) for me, all works for now. Thanks 😄
Were you able to get it to work? Without seeing it wired up, I can’t really troubleshoot it. I’d recommend redoing it from scratch, maybe there’s a loose connection?
@@Eattrvlroll yes all works now, thanks . How did you manage to run the cables through the bike ? Cable management and all and battery mounting point. Cheers
Since I’ve had it, I’ve only charged it twice and only because I wanted to top it off before any longer rides. I’ve been on numerous night rides using the headlight and have never dropped below 3/4 battery
Aliexpress is damn amazing! Because of it, My amazon cafe racer looked much more luxurious than super73's and any other stock cafe racer style for sure!😂 I did this mod, only difference is I hot wired it with the controller it self. My bike already has turn signals but very weak on daylight. I installed a motorcycle ones from Aliexpress, $3 a piece! I bought 8 LMAO! Shipping time is always the hardest part😢
![E-bikes Rules & Regulations you MUST know…[before you get busted]](/img/n.gif)
Thank you. I have been searching for a video that shows me how to set up turn signals. Believe me, there are a ton of them on TH-cam. They were too confusing and also it's probably because they were a little too complicated (for me to follow). Finally, you cleared up everything and with this video everything worked perfectly. Even your (pencil) drawing for the wire connections helped me alot. Whenever I made a mistake I only had to look at your diagram and everything became clear.Thanks so much.
I’m glad it helped you out.
Always a great idea to face the rear blinkers to the sides, so no one behind can actually see them blink...
Thanks bro! Used your video as a guide to get turn signals installed on my ebike!
Glad the video helped!
Awesome video, thank you! now my ebikes gets turn signals
im getting an arctic leopard soon and want to make it street legal. Thank you so much
Thinking of doing this but with a 5ah Makita battery and a buck converter to put out 12v, but principle is same for any drill battery I think. Most people have em, mine as well use em
I’ve seen someone post something similar on the FB groups. Definitely is a viable option for sure.
Nice tutorial! I like your sweet new stickers too!
Thanks bro
Let me know if you some, I got you 🤙🏼
@@Eattrvlroll nice definitely! I am fairly confident that I will be coming out to the last mile group ride. If you are going then we can exchange then!
Do the turn lights have a built in relay the ones I used just light up no blink
Love your explanation on all of your lighting DIY videos. Did you stop riding? I saw that you stopped post ebike content for a year now...
I still have the bikes, I just haven’t had time to make content on them because of my new work schedule. I’m hoping to do more bike stuff again. I’m glad my video was able to help you out.
You need to have to have a fuse on the anode (+) wire
Thanks for the video, can you please give me the battery park link?
For some reason I can’t share it. Search Amazon - Talentcell 12V Rechargeable Lithium ion Battery Pack YB1206000, DC output for LED Strip and CCTV Camera, 11.1V 6000mAh Portable Li-ion batteries with AC/DC 12.6V 1A Charger, Black
When you say to just splice two extra turn signals in it’s hard for me to picture. Can you tell me what that would look like on your schematic?
Thanks for the video. Good job. So to use those blinkers you didn't use a step down converter to 12v from the 52v.
Thank you. For the S2 and RX, no step down needed. They’re already set for 12V
@@Eattrvlroll thanks Brother. I realized towards the end of the video you were using a 12v battery pack. Thanks again.
is that a custom power cord from battery to switch/lights?
Yes. Just had to splice it to the DC connector
ok, can you hook up front and back blinkers with this without a flasher ?
Yes. If you’re using these exact same blinkers, you can just splice an extra pair in and mount them upfront.
Looking good. Any front blinkers in the horizon? Let me know when is the next ride.
The package actually came with 4 blinkers. I took one to Home Depot to find brackets and when I got home I realized I left it in the cart 🤦🏻♂️
@@Eattrvlroll sorry to hear that. You can get the shock wrap around turn signals
My e bike (ANIIOKI AQ177) already has rear turn signals built into the tail light with a switch from the manufacturer.
I want to add front turn signals . Can I splice into the existing wiring to add them?
Nice!! Thanks dude! Just wondering how you would set it up for 4 turn signals? Front and rear
👍🏼. Just splice in the extra two lights the same way. I didn’t do it only because I lost one of the lights at Home Depot while looking for mounting brackets to work with it 🤦🏻♂️
@@Eattrvlroll which kind of light this one sir I try to make one for my bike also thanks.
Please share the links for the battery pack, turn signal switch and turn signals
Sorry about that, I thought I had included it in description. I’ll add it there too
BlyilyB Motorcycle Blinkers... www.amazon.com/dp/B07GZLN7L7?ref=ppx_pop_mob_ap_share
Motorcycle Headlight Switch,... www.amazon.com/dp/B07JLCSTNX?ref=ppx_pop_mob_ap_share
Talentcell Rechargeable 6000mAh... www.amazon.com/dp/B00MF70BPU?ref=ppx_pop_mob_ap_share
TYUMEN 50FT 12/2 Gauge 2pin 2... www.amazon.com/dp/B08MF7BN8H?ref=ppx_pop_mob_ap_share
(Real 18AWG 43x2pcs Copper... www.amazon.com/dp/B072BXB2Y8?ref=ppx_pop_mob_ap_share
Are you charging the portable battery through the bikes existing system? if not, how long does that battery last with the signal lights?
The battery lasts quite a bit. I use it to run my headlight as well. I haven’t run it down till it died, however, I’ve been on night rides (using the headlight) for about an hour and still had plenty of juice left by the time I got home. Since I’ve had the battery pack, I’ve only charged it twice so far.
I'm trying to do this with a different switch that has green yellow blue and red wire instead of just red and black. I'm so lost lol
You should be alright. Once the wires are figured out the rest is easy.
should have used the 3 wire ones so you could have run daytime running lights;)
I’m working on something for that 😉
@@Eattrvlroll getting ready to add side flashers as well :-) front and back also figured out the taillight problem I'm just using a push on/off button to toggle the brake light as I need it works great
Awesome video dude!!! Im in the UK and just wondering how will i know which indicators to get so i dont need the flasher relay? Going to get this on my bike asap :)
I’m glad this helped you.
Just buy the ones in the description
It calls “sequintal mechanism flowing turn light”
What if you wanted to add 2 front as well? How would that wiring look
Same way. Just splice them in - Left w/ Left. Right w/ Right
hello Is it possible to wire it directly on super73 with yellow connector ?
I don’t see it being a problem. Instead of using a DC connector, you could wire it up to a 3 pin connector but then you’d have to splice in the headlight or taillight.
@@Eattrvlroll i have a 3 pin connector free under the seat but is it in 5 or 12volt ?
@@syf2108 which style S73 do you have?
@@Eattrvlroll S73 zx
@@syf2108 oh ok. I don’t know much about the ZX wiring. Not sure if it needs a step down converter or not.
Hi there, I've been trying your method and unfortunately I'm it's not working out for me, here's what's happening, I got all the connections as you mentioned, I turn on the right side lights and it works then I try the second side but it doesn't work :(
Edit: turns out that the blue wire on the switch was the (off) for me, all works for now.
Thanks 😄
Were you able to get it to work? Without seeing it wired up, I can’t really troubleshoot it. I’d recommend redoing it from scratch, maybe there’s a loose connection?
@@Eattrvlroll yes all works now, thanks .
How did you manage to run the cables through the bike ? Cable management and all and battery mounting point.
Cheers
@@NinbAdamgood, I’m glad you got it working. I ran it along the frame using cable management sleeves and zip ties.
Does it matter when joining together different guage wires?
For this, probably not a big deal. I’m no electrician though, so I wouldn’t mixing different gauge wires for other things.
Where do you mount the battery pack?
He is using the battery temporary, he is hardwiring to the battery later
If I use a usb to ac/dc port male would it work?
Sorry, I couldn’t tell you for sure. I’ve never wired it up that way, but, I don’t see why it couldn’t work.
how long does it last before needing to recharge the pack?
Since I’ve had it, I’ve only charged it twice and only because I wanted to top it off before any longer rides. I’ve been on numerous night rides using the headlight and have never dropped below 3/4 battery
Do you think the battery is powerful enough for a 12v horn?
Couldn’t tell you for sure but I don’t see why not.
@@Eattrvlroll thanks.
I bought the Loomenade turn signal kit for $200 cdn then built a way better kit for $50 from aliexpress
Aliexpress is damn amazing! Because of it, My amazon cafe racer looked much more luxurious than super73's and any other stock cafe racer style for sure!😂 I did this mod, only difference is I hot wired it with the controller it self. My bike already has turn signals but very weak on daylight. I installed a motorcycle ones from Aliexpress, $3 a piece! I bought 8 LMAO! Shipping time is always the hardest part😢