Water temperature shall be decided on the nature of your product, which must be defined in the SOP. Usually, it ranges between 40 deg. c to 75 deg C. If your bio-load is high then better to go for 75 deg C. Else lower temp. is ok.
Initially you can start with sampling and testing Swab and Rinse for each equipment after every product changeover. Once you have sufficient products then you can go for cleaning validation. May be after 5 - 10 products
Thank you for making this video
If hot water is to be used for cleaning validation @ what temperature.
Water temperature shall be decided on the nature of your product, which must be defined in the SOP. Usually, it ranges between 40 deg. c to 75 deg C. If your bio-load is high then better to go for 75 deg C. Else lower temp. is ok.
Sir ours is new facility when should we do the cleaning validation as we dont have any products
What is actual process
Initially you can start with sampling and testing Swab and Rinse for each equipment after every product changeover. Once you have sufficient products then you can go for cleaning validation.
May be after 5 - 10 products
Sir cleaning disinfectant change hua hai ky teepol ka remove kiy gya gai
It is recommended to avoid. Best option is hot water.
If need to use cleaning agent then need to save safety data. You can ask your supplier to provide data or based on composition you need check for MSDS
Pls use English while speaking sir
Please learn hindi