Hi Sir, thanks for reaching out. If the substrate is steel (ferromagnetic matrix) and the coating is made of conductive or non-conductive aluminum material, then the UT343D can be used to measure the coating thickness; If the substrate is aluminum (non-magnetic metal matrix) and the coating is made of non-conductive material, then the UT343D also work.
Hi Dear, thank you for reaching out. You could contact our local UNI-T distributor or regional sales manager for the purchase, the contact information can be found at: bit.ly/3OsiDJO Also, you could buy it on our online official stores👉 www.aliexpress.com/store/3095007 unitrend001.en.alibaba.com/
Hi Sir, thanks for reaching out. We recommend using the 1.5V AA Alkaline battery as using a 1.2V battery may result in insufficient voltage so that the gauge cannot operate normally.
Hi Dear, please refer to the calibration instructions in section V.G of the manual. This is the link to the electronic version of the manual.👉 meters.uni-trend.com/product/ut343d/#Docs
Hi Sir, if you were looking for a thickness gauge that can measure both metal and plastic, then I would recommend checking out the UT345A. Please refer to the details about material range at bit.ly/3AoJO2v
Hi Dear, please restore the factory settings and perform the two-point calibration. Please refer to the calibration instructions in section V.G of the manual. This is the link to the electronic version of the manual. meters.uni-trend.com/product/ut343d/#Docs
Hi Sir, thanks for reaching out. If the thickness of the coating on the convex surface of the 3/4 inch tube is measured, it can be measured normally if it meets the Minimum convex radius of curvature. If not, it cannot be measured. The Minimum convex radius of curvature is 5mm. Please refer to the user manual for details and measurement procedure.
@@UniTrendTechnology thank you, I've purchased, but readouts I have are like 30-40% different on tube comaparing to rectangular profile. It works only if calibrated every time on given material shape. Otherwise error is too big.
Hi Sir, the UT343D can only measure the non-conductive coating at moment. If you need to measure the galvanized coating thickness, UT343A or UT343E can be considered.
Hi Dear, if an error occurred in the usage of of the gauge, please restore the factory settings and perform the two-point calibration. Please refer to the calibration instructions in section V.G of the manual. This is the link to the electronic version of the manual.👉 meters.uni-trend.com/product/ut343d/#Docs
Hi sir, thanks for your interest in our UT343D Coating Thickness Gauge. For the purchase price or details, the best is to contact our Egypt distributor. Please see the contact information below. Mahmoud Hamdy G.M. RAM Import & Export 32 El Falky St. Bab El Louk, El Tahreer Cairo, Egypt. Tel: 202 - 27960551 / 27960558 Mob: 2012 - 27682876 Fax: 202 - 27960177 email: mahmoud@ram-electronics.com
Hello, We are trying to measure Zinc Flake Coating on top of Aluminum substrate, can you suggest a gauge for this ?
Hi Dear,
Thank you for reaching out.
Unfortunately we currently do not have a meter to measure zinc coatings.
Best regards,
Uni-T Team
does this tool use a probe?
Hi Sir, it dosen't use.
Will this work on paint on aluminium and steel?
Hi Sir, thanks for reaching out. If the substrate is steel (ferromagnetic matrix) and the coating is made of conductive or non-conductive aluminum material, then the UT343D can be used to measure the coating thickness; If the substrate is aluminum (non-magnetic metal matrix) and the coating is made of non-conductive material, then the UT343D also work.
How can I order this product?
Hi Dear, thank you for reaching out. You could contact our local UNI-T distributor or regional sales manager for the purchase, the contact information can be found at: bit.ly/3OsiDJO
Also, you could buy it on our online official stores👉
www.aliexpress.com/store/3095007
unitrend001.en.alibaba.com/
I'd like to know if I can use inside this coating thickness gauge NiMH 1.2V rechargeable batteries? Or only Alkaline batteries must be used?
Hi Sir, thanks for reaching out. We recommend using the 1.5V AA Alkaline battery as using a 1.2V battery may result in insufficient voltage so that the gauge cannot operate normally.
Hola buenas, el equipo puede medir espesores de recubrimiento de galvanizado en caliente ?
Hi Sir, yes, but the substrate should be a ferromagnetic substrate.
how to make the 2 point calibration?
Hi Dear, please refer to the calibration instructions in section V.G of the manual. This is the link to the electronic version of the manual.👉 meters.uni-trend.com/product/ut343d/#Docs
Hello does it mesure coating thickness on plastic ?
Hi Sir, thanks for your reaching out. The UT343D is used to measure the coating thickness on the metal substrate.
@@UniTrendTechnology so to.mesure both on metal and plastic what should I buy ?
Hi Sir, if you were looking for a thickness gauge that can measure both metal and plastic, then I would recommend checking out the UT345A. Please refer to the details about material range at bit.ly/3AoJO2v
I have problem i can not calibrate it...
Hi Dear, please restore the factory settings and perform the two-point calibration.
Please refer to the calibration instructions in section V.G of the manual.
This is the link to the electronic version of the manual. meters.uni-trend.com/product/ut343d/#Docs
This tool can be measured aluminum?
Hi sir, yes it can. The UT343D coating thickness gauge can
measure coating thickness on ferrous and non-ferrous materials.
how can i measure 3/4 inch tube coating with it?
Hi Sir, thanks for reaching out. If the thickness of the coating on the convex surface of the 3/4 inch tube is measured, it can be measured normally if it meets the Minimum convex radius of curvature. If not, it cannot be measured. The Minimum convex radius of curvature is 5mm. Please refer to the user manual for details and measurement procedure.
@@UniTrendTechnology thank you, I've purchased, but readouts I have are like 30-40% different on tube comaparing to rectangular profile. It works only if calibrated every time on given material shape. Otherwise error is too big.
Can I measure galvanized coating thickness by this tool?
Hi Sir, the UT343D can only measure the non-conductive coating at moment. If you need to measure the galvanized coating thickness, UT343A or UT343E can be considered.
Hi Can I measure Paint thickness on Wood?
Hi Sir, thanks for your reaching out. The UT343D is used to measure the coating thickness on the metal substrate.
Cara seting jikalau terjadi eror?
Hi Dear, if an error occurred in the usage of of the gauge, please restore the factory settings and perform the two-point calibration.
Please refer to the calibration instructions in section V.G of the manual.
This is the link to the electronic version of the manual.👉 meters.uni-trend.com/product/ut343d/#Docs
1+3%H
What is denoted by H here
Hi sir, the H represents the thickness value measured.
عاوز جهاز السعر كام انا من مصر
Hi sir, thanks for your interest in our UT343D Coating Thickness Gauge. For the purchase price or details, the best is to contact our Egypt distributor. Please see the contact information below.
Mahmoud Hamdy
G.M.
RAM Import & Export
32 El Falky St. Bab El Louk, El Tahreer
Cairo, Egypt.
Tel: 202 - 27960551 / 27960558
Mob: 2012 - 27682876
Fax: 202 - 27960177
email: mahmoud@ram-electronics.com