Beat Sonic ENA 2T3 Install on Toyota RAV4 with Android Headunit

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ม.ค. 2025

ความคิดเห็น • 7

  • @michaelpham4730
    @michaelpham4730 25 วันที่ผ่านมา +2

    If I have the stock radio/info system, do I need to do the wire modification?

    • @Forged_Garage
      @Forged_Garage  25 วันที่ผ่านมา +1

      You may not need to do the wire mod on your stock radio, watching some of their install video didn’t mentioned about the wire mod, I just did some tinkering when mine did not power on, and was able to trace it, but before i did the mod I contacted them to get a go signal to do it.

    • @mattburgess2
      @mattburgess2 24 วันที่ผ่านมา +1

      I have the amp on stock stereo. It was all plug and play, no wire mod needed

    • @michaelpham4730
      @michaelpham4730 24 วันที่ผ่านมา

      @@mattburgess2 big difference? How do you like it?

    • @yakuzahi
      @yakuzahi 12 วันที่ผ่านมา

      Thanks for the video but I just wonder where did you place the box because every time you want to change the setting in the knob you have to take it out of the dashboard?

    • @mattburgess2
      @mattburgess2 12 วันที่ผ่านมา +1

      @yakuzahi i pulled out my glove box and snaked the wire straight down off towards the passenger side. I left the amp for a few weeks on my passenger floor so I could make adjustments. When I got the amp settings how I like them there is a small panel that pops out on the passenger side towards the front of the center console. Kind off if you were sitting in the passenger seat right where your left foot would rest against. Anyways behind that small panel there's a perfect size area for this amp. There's a computer already there you will see but this amp fits and can sit right on top of it. Anyways that's how I set mine up. 👍