You produced an attractive and sleek design, so congratulations. My experience with this kind of furniture is that it's difficult to get in/out of the bed without banging my shins on the platform's edges. So I would want either to be sure that all the platform's edges are strong enough to stand on when I enter or leave the bed, or at least to round off the platform's sharp edges and corners in some way. Your design should also support convenient disassembly of the bed frame, so that it can be moved from room to room or to another home if desired.
The amount of wood used in this is astronomical. I'm sure one can use less like 50pc less to achieve the same result and make it easy to assemble and disassemble.
I love the bed. I would like to have all the specs so I could replicate it. My son would love to have one just like this. I have been looking for one just like this but haven't found it until yours. Thanks
Has already been said but very nice efficient, minimal production method! Can you please tell more about your finishing/staining methods? Wipe on poly?
Thank you! I start with pre-stain conditioner to avoid blotches and unevenness of stain. Then I mixed equal parts of dark walnut stain, English chestnut stain and mineral spirits. Left it to dry for a day and finished with wipe-on poly. I did three coats of wipe-on poly, sanded lightly and did 2-3 more coats. Sanding in between.
Hi, great work piece. Can you provide link to where the stains can be purchased: Pre-stain conditioner Minwax Dark Walnut English Chestnut. Thanks in advance.
Right, you kept it really simple and you also kept me from going out and buying a really expensive saw, the rail are really nice finish touch, nice work my friend
Im putting together ideas to create a base for my king size waterbed. I need LOTS of strength. This came out killer! Very nice-thank you for inspiring! :D
Did you make you bed yet ? There is a great article by Ian Kirby on building Torsion Boxes. Very lightweight and strong/resistant to twisting. It's the same principle as Airplane wings. Fine Woodworking, ?1982. Let me know if you can't find it.
Saw the thumbnail and was definitely going to make it. Watched the video and um.. I'm going to have to make a few adjustments. It's a heck of a build. Not sure I could pull it off as good as you did. Nice work!!
I’ve been looking to build a floating bed and I love this design you made. Would you be willing provide me with measurements for this project for a queen size bed.
Just take your queen size mattress measurements and start by making the mattress base from there most of the other measurements could be too your preference
I am sure I have missed it someplace, but is there a cut list provided,and how can you go crazy on bracing on a bed exactly, I dont think there is any such thing for this application,great project though
Love the bed so much. It is amazing the power tool you have are the circulate saw and drill. The bed looks so beautiful. What kind of color stain do you use ?
Thanks for the video, I must commend your work. I’d like to know the type of wood you used for the bed, and how much weight it can withstand. Thank you
Thank you, I used pine boards which are cheap and easy to cut. And the bed is extremely sturdy. Maybe too sturdy for a build like this but thats what I was going for.
I thought pine wood was soft? 😢 I’m trying not to get some wood that would break after a while, cos the bed frame is kinda permanent. I’m sorry for my english
I enjoyed the simplicity of production. And it was nice not listening some guy try to keep it alive with forced energy. I think I’m gonna make what you made. Probably with an angled headboard. Not sure how yet, but I’ll get there.
I see you with the ryobi! All green everything u a green machine!
best build Ive seen yet
This is amazing , can U share the plan aswell thanks, as I want to build it
One of the more practical builds on TH-cam.
Well isn’t that fancy lol I love your blue tape and glue technique
Thank you. Saw it in some other videos and worked well
That's genius with limited tools. Awesome and amazing work of art! Thank you for sharing..
this is the best one ive seen. Wish youd put the plan up, or added the components and cm you used. Thank for the inspiration!
You produced an attractive and sleek design, so congratulations.
My experience with this kind of furniture is that it's difficult to get in/out of the bed without banging my shins on the platform's edges. So I would want either to be sure that all the platform's edges are strong enough to stand on when I enter or leave the bed, or at least to round off the platform's sharp edges and corners in some way.
Your design should also support convenient disassembly of the bed frame, so that it can be moved from room to room or to another home if desired.
The clam. The Ruler and Circular Saw for straight cuts with out a table saw or miter saw is game changer for me. Thank you for sharing. Great work
Haha! I really appreciated that. Thank you!👍
The amount of wood used in this is astronomical. I'm sure one can use less like 50pc less to achieve the same result and make it easy to assemble and disassemble.
I love the bed. I would like to have all the specs so I could replicate it. My son would love to have one just like this. I have been looking for one just like this but haven't found it until yours. Thanks
This design is amazing! Can you share the specs or blueprint so I can replicate? I'd love to do one of my own. Thanks!
Without a blueprint does not help so much.
Great design.Building smtig similar. Thanks for idea
this is very satisfying to
wach and I really want to made this
is any way you can share a list of all the materials and all the measurements your use
Carai! Deitou em mulekote! Você é zika! Parabéns!
Something so rehabilitating to watch projects being built
It's all i watch!
10/10 on your music selection! Your video was pleasant to listen to.
Thank y'all so much dearest 🌹
Y'all such an inspiration 🥰
Appreciate y'all from the bottom of my heart 💖
Be Blissful Eternally 🙏👼🌈
This came out beautiful
thank you!
Technique, propre, esthétique, ambiance musicale adéquate merci pour l'inspiration.
;)
Se ve excelente y bien hecha!
You should put down what materials you used and how much in your bio
Carlo Ray, si volvieses a hacer la cama, mejorarías o harías algo de diferente manera?
Saludos desde Bolivia.
Very professional job... Very nice
Thank you! 👍
Beautifulll....👏👏👏👏
Thank you
Great video. Loved the bed! Nicely done!!
Thank You!
This man build this with just a power tools and a skill saw... pretty bad ass..
I appreciate you! Thanks🙌
Great job 👏👏👏 less tools great result 💯%
Has already been said but very nice efficient, minimal production method! Can you please tell more about your finishing/staining methods? Wipe on poly?
Thank you! I start with pre-stain conditioner to avoid blotches and unevenness of stain. Then I mixed equal parts of dark walnut stain, English chestnut stain and mineral spirits. Left it to dry for a day and finished with wipe-on poly. I did three coats of wipe-on poly, sanded lightly and did 2-3 more coats. Sanding in between.
Hi, great work piece. Can you provide link to where the stains can be purchased: Pre-stain conditioner
Minwax Dark Walnut
English Chestnut. Thanks in advance.
Can you specify the size of the woods....
Very nicely done, especially given the limited set of tools you used.
Thank you so much! I appreciate you!😁
Right, you kept it really simple and you also kept me from going out and buying a really expensive saw, the rail are really nice finish touch, nice work my friend
What kind of wood or stain u use did u have to plane any of the wood most 2x6 come all warped
Dude. You have mad skills with a circular saw.
It's all I had brother! Thanks
Hope you also have mad skills with the vacuum cleaner
Hello. That netted-wood insert lay in deal up under the mattress.What is that?
Solid build great work
Thank you!🙏
Would you post the Materials that was needed? Great job
Sweet craftmenship and design! Love the music along the video. How much did you spend on all the wood?
Are these type of beds practical ??? Thinking of buying one but not sure yet
Wonderful, bit don't you need to fix it between the upper and lower frames?
Amazing!!!
What are the materials and dimension?
Very nice. If you don't mind, What did You apply prior to putting on the dark stain?
Thank you. It's a pre stain conditioner, which helps avoid blotches when staining. If you try it, it should give you a more even colour in the end.
Nice,How much it cost? Where do I can get one
Im putting together ideas to create a base for my king size waterbed. I need LOTS of strength. This came out killer! Very nice-thank you for inspiring! :D
That's fantastic, I would love to see it one day!
Did you make you bed yet ? There is a great article by Ian Kirby on building Torsion Boxes. Very lightweight and strong/resistant to twisting. It's the same principle as Airplane wings. Fine Woodworking, ?1982. Let me know if you can't find it.
Saw the thumbnail and was definitely going to make it. Watched the video and um.. I'm going to have to make a few adjustments. It's a heck of a build. Not sure I could pull it off as good as you did. Nice work!!
What did you use to wipe down the wood before staining? It was the stuff in the white bottle.
Mineral spirits
This is the content I am here for.
This is a fantastic method 💖👌🏼💯 Thank you so much for the great videos. I am MR SRI channel from Sri Lanka, I'm a big fan... Keep going 💖👌😍
Thank you so much for the support. I appreciate you
This is the best platform bed I have seen on TH-cam. Seriously.
Bravo to you!
Thank you
Do you sell any plans
Hey solid work bro. Would you happen to have the cut list and materials for this?
I’ve been looking to build a floating bed and I love this design you made. Would you be willing provide me with measurements for this project for a queen size bed.
Just take your queen size mattress measurements and start by making the mattress base from there most of the other measurements could be too your preference
Please make plans. This was a great build.
Hola, proyecto precioso. ¿Tienes planos del proyecto, aunque solo sea un croquis?
Saludos desde España
Hi carlo my daughter asking g me for a bed like this one , you think u can give me a hand and tell me the measurements of the frame is it a full size
I wonder what wood stain he used
The exact stain I used is equal parts dark walnut stain and english chestnut stain, both minwax brand.
Nice project. Would you be able let me know about the specs ? Thanks.
Is it possible to have the dimensions of the wood used in this video ????
Ficou perfeito. parabéns pelo esforço no final valeu a pena 🤩😚🤗😘👏👏👏😘😍🙃❣️😙🤩🙃
Do you have a place where you right down size and cut angles that us mortals can refer to?
Friend, do you suddenly have all the measurements and plans?
You could wrap foundation around with veneered plywood .
Hey! Can you tell me what minwax stain did you mixed please?
I am sure I have missed it someplace, but is there a cut list provided,and how can you go crazy on bracing on a bed exactly, I dont think there is any such thing for this application,great project though
Wonderful work mate. Keep it up....
🙏👍
Perfect Job !
Thank you!
Buen trabajo, felicidades-
Where can i buy those woods here in the philippine?thank you for answering me😊
I'm not sure, have you checked a nearby hardware store?
Can i get the cut list annd material list for this project
Love the bed so much. It is amazing the power tool you have are the circulate saw and drill. The bed looks so beautiful. What kind of color stain do you use ?
Excelente proyecto .. me gustaría hacer ese proyecto sería bueno q puedas poner las medidas. Saludos desde Perú
What stain and color did you use?
What wood is this please? I love the design! Thank you for the video by the way! Amazing and creative mind ;)
Thank you! It's pine wood that's been stained!👍
@@CarloRay : it looks so cool. Could you please tell,, What stain you have used?
can someone provide plans for this
Bro, quiero hacer algo similar aquí en México, podrías pasarme medidas de las tablas y productos que utilizaste para teñir la madera por favor?
Buenas tardes , una pregunta, a que precio tiene ese diseño de cama.. así en esa medida..
What size mattress does this frame fit?
Thanks for the video, I must commend your work. I’d like to know the type of wood you used for the bed, and how much weight it can withstand. Thank you
Thank you, I used pine boards which are cheap and easy to cut. And the bed is extremely sturdy. Maybe too sturdy for a build like this but thats what I was going for.
Carlo Ray thank you for your response
I thought pine wood was soft? 😢 I’m trying not to get some wood that would break after a while, cos the bed frame is kinda permanent. I’m sorry for my english
What are you Ron from 'parks and recreation' or Tom Hanks from 'the terminal'?
Looks great! It really is a good feeling to sleep on something you made!
what kind of wood is he using
I used pine boards and dimensional lumber from home depot. 😁 They used to be a lot cheaper.
this is amazing but can you list what you use for this project
Does the protruding board cause great harm to you shin?
God's talent, amazing
Thank you
I like this "floating" platform bed, though it is not floating at all!
What was your process when finishing the wood? Was that wood conditioner and what type of stain? It looks fantastic.
Beautiful
Thank you!!!
Do you have plans for this build
Would love to build this can you share plans
Excelente proyecto!!! Gracias
thank you!
I enjoyed the simplicity of production. And it was nice not listening some guy try to keep it alive with forced energy. I think I’m gonna make what you made. Probably with an angled headboard. Not sure how yet, but I’ll get there.
Cool! Hope I come across it one day!
Very good. 👏👏👏👏👏👏
Thank you
what was the cost for the timber?
Where is the blueprint for this project????????????
Are you based in the west coast do you make and ship?
East!
Hello, I am following you from Iraq Your work is beautiful and elaborate. I would like to know what materials you used to paint and finish
Thank you, I used minwax stain conditioner, followed by minwax stain and finished it with a couple coats of wipe-on poly, sanding in between coats!
@@CarloRay Thank you
please tell me all sizes of board cut
Is that last part a hint of things to come?
What are the measurements of this bed?
Definitely awesome but the most complicated piece I’ve ever seen built