I'm 65 years old I love watching your videos and been watching them for a long time . But it's just funny how you have to explain what points are to people . 👍👍🔧
Times are changing! I had a kid asking me for help because he didn’t know where to plug his laptop into his car. It was an old Nissan with carburetors haha. He had no clue.
Big facts man love to see the boiis enjoying something new to them especially over on Marcus’s channel with his drift tractor build I hope that comes out as expected it’s already looking good
Can we get a drone intro at the ranch w some fly bye of Carla ripping the e bike or if you have pavement anywhere a sweet burn out ..... lol in my mind it looks amazing
hey Jack just let you know there called starter generator and yea the gas tank seen better days,if you have any questions about your Cub I can help you out i know a little bit about them. oh and it also looks like the clutch is new as the coil.
You don't need specific knowledge to work on them if you know the basics. Air Fuel Spark. For the tank you can line them with fuel resistance coatings... or put a bladder inside of them if the casing has rusted too much and gotten thin. The starter switch is a great fix, never need to look for the key/screwdriver/etc.
Looks like you have the correct muffler laying on that chair , you need to turn that exhaust elbow down and to the right to took that muffler up. Then the muffler bolt to that plate sticking out over it through the hole in the plate.
@@JackCecil o ok yeah it’ll look cleaner but I had a question I’m trying to get a tune for my deleted 6.4 powerstroke but having no luck u know where I can get one I’m running sct x4 tuner
Still wondering if you seen the pics of my 78 bowlens that im putting turbo on lol. Started it about 8mnths ago. Have oil cooler and a pump since the old boys really dont and all to make it work. Just havent got any further. Nervous to even go to far on it cuz like you said some of these old school tractors in good shape are fetching 3k/5k$. Mine being built in the state i live in and firing off no issue is cool but who really actually cares and buys em u know lol.
Hey jack if you’re interested I have a video on my channel of my ‘67 Cub 122 with a 16hp Vtwin vanguard motor on it when I was like 10, was a fun time till I busted a connecting rod trying to do wheelies😂
Jack, would you ever consider getting into RC car drag racing? I've watched you for years and I know you'd be great at getting full potential out of them. Of course after the tractors are done, loving the builds.
Really? Awesome. Ive seen some of your RC stuff, but I dont remember the drag racing. Maybe I'm mixing you up with another youtube channel called ActiveHoodrich, hes in southern Cali and films everything from low riders to Rc drag racing. Anywho, I think you should slam the new tractor on Tarmacs and daily it 😉 Thanks for the content Jack.
Being that old it will need some work. It is very savable. What happen to the tunnel between the seat and steering wheel? Looks like some one cut out a creeper gear.
@@JackCecil That is common on these. You could bolt a plate it in there to clean it up, and you would have access to it later. On that later series cubs there is a cover that unbolts right there.
Back when they made things to last out of pride and doing the right thing for your customers. Today its making the absolute minimum quality (so it last just beyond the warranty) so they can sell you another one when it breaks.
I doubt you will catch this comment jack....but,how did you start off before you had HP logic? I'm 32 and work for the post office and I'm just like.....how did Jack get to where he is.....I want sick cars and nice property...I feel like ingot the short end of the stick being born to a drug addict and a car thief...maybe Jack got to where he is from somewhere shitty.....wish I knew.
Kids these days dont know shit about points and o g ignition systems . Ask. 20 year old what a carb is. They say "the thing on a weed pipe ya big dummy"
When he says he gonna look at the carb its getting full port and polish lol
Lmao so true
Jack's ranch is a little slice of no political bs heaven.
love that
It really is.
I didn’t see any head gaskets in that COBB order. lol
Marcus already had the motor apart 😂
😅🤣😂
I'm 65 years old I love watching your videos and been watching them for a long time . But it's just funny how you have to explain what points are to people . 👍👍🔧
Times are changing! I had a kid asking me for help because he didn’t know where to plug his laptop into his car. It was an old Nissan with carburetors haha. He had no clue.
@@JackCecil 👍👍🔧
For not being to familiar with these tractors, your doing one fantastic job getting after the problems on this one! Great job!!!
loving the tractor stuff jack ITS AN AWESOME CHANGE TO see you guys all about em lol
Big facts man love to see the boiis enjoying something new to them especially over on Marcus’s channel with his drift tractor build I hope that comes out as expected it’s already looking good
Can wait to see all three of them hopefully in action, thanks for the shout-out too.
Yea man! I’ll go get em on Saturday. I’ll keep you posted!
Might be aggravating you have to do so much work to it, but now you know it'll be running like a top. Such a cool machine, have to keep it around!
Can we get a drone intro at the ranch w some fly bye of Carla ripping the e bike or if you have pavement anywhere a sweet burn out ..... lol in my mind it looks amazing
You’ll be harvesting before you know it. I have faith in you Mr. Jack
hey Jack just let you know there called starter generator and yea the gas tank seen better days,if you have any questions about your Cub I can help you out i know a little bit about them. oh and it also looks like the clutch is new as the coil.
Loving the wonderful content jack!!!!! So damn excited to see how far the tractor will go, that international is badass
Chucke2009 vibes here, "today on tractor hoarders". Love it.
Jack make sure the new starter generator turns the same direction as the old one. Best of luck.
I have faith that in 1963 20 horsepower was stronger than we think of today!....?!? ;)
It for sure was.
I had one of those, great little tractor, rock solid.
I might be able to find a good gas tank for it, I know I have a couple starter generators on the shelf I'd let go of would have to be shipped.
Email me! Jack@horsepowerlogic.com
I appreciate the offer!
You just need a good resistor. I had ran one like this four years. My Pop’s set me up. It was a coil out of a 77 Chrysler New Yorker 440 bb.
Dude, I know you said you weren't going to referb it.. Do it.. 1960's keep it alive!
This has me so stoked. I have the same tractor and it makes me want to get it back up and going. It’s sat for probably 25 years now
bore out the mower motor and add better compression! add a tiny belt supercharger to it go nut's!
Man your starter issue reminds me of my 57’ Ford 5N. Thing just runs through starters I just pop start it at this point.
I leak a little too in my old age.
I’ve got Cobb/weather tech floor mats for my Mazda 3. I love them super nice.
Not always rainbows and butterflies
It really isn’t.
Great video 💯❤️👊
Hell yeah loving the tractor builds
You don't need specific knowledge to work on them if you know the basics. Air Fuel Spark.
For the tank you can line them with fuel resistance coatings... or put a bladder inside of them if the casing has rusted too much and gotten thin.
The starter switch is a great fix, never need to look for the key/screwdriver/etc.
you can put dodge dart axles and cariers in the rear end and make it realy beefy
I have a 1961 economy jim daisy tractor it so good
love the tractor stuff
Looks like you have the correct muffler laying on that chair , you need to turn that exhaust elbow down and to the right to took that muffler up. Then the muffler bolt to that plate sticking out over it through the hole in the plate.
Love the videos
you will get it fixed , fo sho
Love the tractor content!
Hopefully you're good at sourcing valvespring specs and a good welder that can build and Hardface weld a cam for more power and speed .
I want to see a cool drift tractor
that thing been sitting outside and working its 50+ years an still has less rust then my 2010 craftsman, sure dont make em like they use to
Clicked from Ruddy's video, this is more interesting lol
Lol
Love it little old rusty
keep the great work
I’m trying!
You should have that starter rebuilt. That classic patina mate. Save it :)
I’ll keep it and rebuild one day. It’s been messed with internally so i think the armature is damaged.
You can get a rebuild kit for 12 dollars. Bearings, 2 contacts and bam. Will work perfect.
Don’t get rid of that starter generator! They are often rebuildable.
Can you ship car parts to BC Canada if I order?
If you need parts go to the website I save tractors
You can buy a resister You can mount up they’re like 5-10$ at autozone
The resisted coil is about 20 bucks and then i won’t have extra wiring, but yes an external resistor is another option
@@JackCecil o ok yeah it’ll look cleaner but I had a question I’m trying to get a tune for my deleted 6.4 powerstroke but having no luck u know where I can get one I’m running sct x4 tuner
Jack stickin with that 720p
At least it 60 FPS
I have horrible internet.
The points should come with a resistor
That’s a condenser not a resistor.
You want to see a lawn tractor check out grind hard plumbing 2jz+mower = badass 😆
Lemon Tractor vs Cecil Factor
Still wondering if you seen the pics of my 78 bowlens that im putting turbo on lol. Started it about 8mnths ago. Have oil cooler and a pump since the old boys really dont and all to make it work. Just havent got any further. Nervous to even go to far on it cuz like you said some of these old school tractors in good shape are fetching 3k/5k$. Mine being built in the state i live in and firing off no issue is cool but who really actually cares and buys em u know lol.
Tractor looks like an old tonka toy
#Tractorgang. 🤘
The tractor might be a 6 volts system and you're putting 12 volts
You should K swap it and stick a turbski on it and shot of nitro
Hey jack if you’re interested I have a video on my channel of my ‘67 Cub 122 with a 16hp Vtwin vanguard motor on it when I was like 10, was a fun time till I busted a connecting rod trying to do wheelies😂
Jack, would you ever consider getting into RC car drag racing? I've watched you for years and I know you'd be great at getting full potential out of them. Of course after the tractors are done, loving the builds.
Jack has a lot of RC content.
Watch my older videos. I did a lot of rc drag racing.
Really? Awesome. Ive seen some of your RC stuff, but I dont remember the drag racing. Maybe I'm mixing you up with another youtube channel called ActiveHoodrich, hes in southern Cali and films everything from low riders to Rc drag racing. Anywho, I think you should slam the new tractor on Tarmacs and daily it 😉
Thanks for the content Jack.
I just DM'd you on Instagram about a cub cadet 129 for sale locally for what seems like a decent price
Yo what happened to Roberto I never found out?
😎✌
Didn't you say you bought a diesel tractor to? Can't wait to see that
My John Deere 855 is diesel
My neighbor might have a wheel horse big tractor for sale will let u know jack
Being that old it will need some work. It is very savable. What happen to the tunnel between the seat and steering wheel? Looks like some one cut out a creeper gear.
I think it was cut to access the driveshaft coupler.
@@JackCecil That is common on these. You could bolt a plate it in there to clean it up, and you would have access to it later. On that later series cubs there is a cover that unbolts right there.
Back when they made things to last out of pride and doing the right thing for your customers. Today its making the absolute minimum quality (so it last just beyond the warranty) so they can sell you another one when it breaks.
Sad but true
That cobb stuff is so overpriced for the quality its insane. So many other better options.
169 viewer got a good number lol
She thinks my tractors sexy
You can’t paint it
I doubt you will catch this comment jack....but,how did you start off before you had HP logic? I'm 32 and work for the post office and I'm just like.....how did Jack get to where he is.....I want sick cars and nice property...I feel like ingot the short end of the stick being born to a drug addict and a car thief...maybe Jack got to where he is from somewhere shitty.....wish I knew.
Kids these days dont know shit about points and o g ignition systems . Ask. 20 year old what a carb is. They say "the thing on a weed pipe ya big dummy"
Yea, tell me about it. It’s a sad time to be a classic tractor.
107th viewer
1st