I love how you take the time and restore everything on this guitar. Even polishing and restoring the metal parts rather then simply swap them out for new parts.
You do excellent craft work. When you were dressing the frets. Your actually doing the work that's done on expensive American Stratocasters. The ones from Mexico, lack that feel of the fret board and frets. Lacking in the complete dressing of the frets. You can feel it under your fingers. Great job!
The way this guitar was pulled apart and everything was restored to factory-new condition was amazing. I picked up a 95 Tex-Mex Strat in Vintage White back in April as a birthday present and would love to restore the neck plate, the tuning keys, the bridge saddles and the strap pins to their original looks. Love how this video turned out.
Andy muestra una pasión por los detalles fuera de lo común , creo que cualquier guitarrísta se sentiría a gusto de confiarle su instrumento . Felicitaciones .
Excellent job once again!..I notice that you did not use heat to scrape this finish off. Was this a poly finish and do you only use the iron for lacquer?..I never thought to use a Dremel to polish frets..always used micro mesh and lots of rubbing..thanks for posting!!
Absolutely love this channel and love your work! One thing that puzzled me though: was there any reason why you didn't level the frets and just polished them? I know it isn't lack of attention to detail because that's the main characteristic of this channel so I'm curious... Once again, thanks for the great videos!
@@Andybassguitar what polish did you apply when polishing the frets? I've got a 95 Mexican made Strat where, with just one look, you can tell needs some work.
Why would you strip off the beautiful sunburst for Black? Black is the worst color, so many black instruments out there. Plus this was a nitrocellulose finish!!!
![Epiphone Factory Tour in China [English Subtitles] - presented by Digimart](http://i.ytimg.com/vi/LRczd_ZEf4E/mqdefault.jpg)
動画の雰囲気もそうですが、ここまで魅入らせる作業をしてからの、「かんせい。」の、平仮名にとても人間味の溢れたアンディさんの作業感性や温もりを感じました。この動画に出会えて良かった。こういった方が楽器をリペアレストアしてくれている、というのを知れてよかったです。いつか依頼すると思います。
Amazing workmanship , such a joy to watch your work
Best video with no music. The BC rich was awesome. Totally into this now.
Beautiful work.
STのサドルってこんなふうに磨くんですね〜
しかもイモネジの内側まで... 素晴らしすぎます ^ ^
手で直に触って作業されてるところ共感します
Beautifully done.
Jimmie Vaughan would approve right here. Great job man.
simply taking care of history and dreams. Congratulations, your videos are magnificent.👏🏻👏🏻👏🏻👏🏻👏🏻
I love how you take the time and restore everything on this guitar. Even polishing and restoring the metal parts rather then simply swap them out for new parts.
Good job! You very great professional!
You do excellent craft work. When you were dressing the frets. Your actually doing the work that's done on expensive American Stratocasters. The ones from Mexico, lack that feel of the fret board and frets. Lacking in the complete dressing of the frets. You can feel it under your fingers. Great job!
The way this guitar was pulled apart and everything was restored to factory-new condition was amazing. I picked up a 95 Tex-Mex Strat in Vintage White back in April as a birthday present and would love to restore the neck plate, the tuning keys, the bridge saddles and the strap pins to their original looks. Love how this video turned out.
さすがに丁寧でいい仕事されてますね。
最後の完成したギターをお披露目するところがBGMと相まって癒されます。
Pleasure to wacth this! Thanks!
愛を感じる良い仕事ですよ 頑張ってください！
愛を感じていただけて光栄です。
This is so satisfying to watch. Great video Sir.
さすがF社！ネックもザグリもキレイに仕上げてある！そしてこのオーバーホールの技術よ・・・溜め息出る。
Andy muestra una pasión por los detalles fuera de lo común , creo que cualquier guitarrísta se sentiría a gusto de confiarle su instrumento . Felicitaciones .
Gracias Arigatou!
¡ Por nada ! you´r we llcome ..@@Andybassguitar
This is professional restoration.. good job buddy👍👍👍👍
ありがとうございます。
Ooooh that's definitely a yes from me 😊
Beautiful finish and shine to the paint,you do very nice work my friend,keep it up.
Thank you!
una exelente restauracion, se ve que usted es un profecional muy capas, saludos desde mexico
職人がやったらオーバーホール→組み上げするだけで変わるから凄いよね～
! excellent work sir ! thanks very much for posting
Thanks for watching the video.
Watch new videos if you like!
He turned it into a Strat that just came off the assembly line next week! I would have liked to hear it though, but he knows his stuff!
やっぱり黒いストラトってかっこいいですね👍
An Artist!
SRV's bigger brother!
Great job ,it looks perfect
ギターに意志があるかのように蘇って喜んでるように感じます・・これから沢山活躍するんでしょうね～♪
Good job!!!
Excellent job!. Greetings from Tucuman, Argentina.-
やっぱりandyさんがいじるとどんな楽器でもとてもよく見えます！
リフィニッシュがあれば絶対頼もうと思ってます
Wonderful job!
Please show how to clean dirt, rusty stratocaster pick-ups. Thank you
I'm binge watching your videos. Wish I could have you work on my guitar
指板めっちゃ綺麗だなぁ...
『punk&rockandroll』れん坊
指板ではなくて、フレットでは？？
フレットの磨きで、ヴィブラートやチョーキングの抵抗が変わってきます。
あとサビサビの弦でも変わってきて、フレットの減りに少し関係してきます。
メンテは大事ってことですね
むへ いえ、俺が言ってるのは指板です
『punk&rockandroll』れん坊
指板ですか？？
指板は拭くぐらいで何もしてないと思いますが。。。
この作業とは関係なく、単に年代にしては綺麗な指板だなーて事ですか？？
Y Hata おぉwご本人様ですかw
綺麗なギターなので大事になさってくださいm(_ _)m
自分はフレッシャーのストラト入手したので弄ってます～
I love the fact they put full steel blocks in them. I have a Hendrix strat
Great..
I love your vid like it
Thank you! Kamusahamunida!
手先の器用さ、ギターの特徴、塗装の繊細さなど感動ばかりですね💦
自分のギターも復活させていただきたい、、
オーバーホールのみだったら安く出来るのでおススメです。ご相談待ってます！
Andy bass & guitarさん
オーバーホールとリフィニッシュの料金をお伺い出来ますか？？
パーツ、フレット磨きで1万円〜になります。
ギターによって磨けないパーツや、作業量が多い物もあるので金額が変わります。
リフィニッシュの料金ですができる塗装や出来ない塗装、カラーや仕上げなんかでも大きく変わるので、メールにてお問い合わせをお願い致します。
andy.bass.and.guitar@gmail.com
Pretty.
ポリ塗装のストラトボディを黒のラッカーで再塗装していただく場合の料金はおいくらになりますか？
また別のポリ塗装のSGのボディ、ネックをチェリーレッドのラッカーで再塗装していただく場合はおいくらになりますか？
Pickguard Black 👍😉
Excellent job once again!..I notice that you did not use heat to scrape this finish off. Was this a poly finish and do you only use the iron for lacquer?..I never thought to use a Dremel to polish frets..always used micro mesh and lots of rubbing..thanks for posting!!
Thank you.
@@Andybassguitar how about answering BJ Stein"s question ?
Is that an Yngwie Malmsteen signature on the rear of the headstock?
久々の動画お待ちしておりました
私も最近ストラトタイプを手に入れましたが、ゴールドパーツ錆びてパーツも廃盤で・・・
お願いしたいなぁ
ゴールドパーツは何してもはげてくるものなので、諦めるか、再メッキするか、汎用品にパーツ交換するのがおすすめです。
基本的にギターパーツは汎用性があるので着くものを探すのもおすすめ。
アドバイスありがとうございます
2点支持のブリッジなのにメーカーでも使えるパーツが無いってｗ
アマゾンに安い2点支持のゴールドブリッジがあるので
それでとりあえず加工無しで付けばいいんですけど
別にゴールドパーツにこだわりは無いので、オクで仕入れたフェルナンデス純正のクロームのブリッジが加工無しで付きそうですから
ペグもクロームに替えてゴールドパーツはナットだけになりそうですw
What grit size do you use before polishing with compound ?
Great video as usual.
Initially, using amzn.to/33VBrLb, you can use the
I'm using this amzn.to/3dH6xuo to finish.
@@Andybassguitar Thanks, though I mean sandpaper size, before polish
Absolutely love this channel and love your work! One thing that puzzled me though: was there any reason why you didn't level the frets and just polished them? I know it isn't lack of attention to detail because that's the main characteristic of this channel so I'm curious... Once again, thanks for the great videos!
ストラトのリフィニッシュでポリ→ラッカーの場合おいくらほどで受けていただけるのでしょうか？
状態やカラー、使用によって金額が変わりますので詳しくはメールをお願い致します。
andy.bass.and.guitar@gmail.com
You have really great videos, Andy. What grade of sandpaper are you using to polish the frets, and what type of polish?
Sandpaper used to polish frets is # 400, # 600 # 800 # 1000 # 1500 # 2000.
You can start with 600 if you are beautiful.
@@Andybassguitar what polish did you apply when polishing the frets? I've got a 95 Mexican made Strat where, with just one look, you can tell needs some work.
What do you use to fill the pores before the black paint?
At this time I am applying sanding sealer.
Now I'm basically applying pure lacquer.
Do the frets get leveled and crowned or just polished?
The frets were leveled and crowned.
新品より綺麗
問い合わせはどちらへすれば良いのでしょう？
マッチングヘッドものでもリフィニッシュ作業可能でしょうか？
デカールを消して塗装するしかないので、デカールを用意するか、ネット上にデータがあれば再現可能ですね。
なんかパーツがバラバラにされてるのを見ると気持ちいいｗ
Very good work. You should also check the level on the frets.
解説字幕がめちゃくちゃありがたい
👏👏👏
you should tin the exposed wire and then run it through the eye to solder. hook it, solder and it'd be ready for space travel.
Yes.
I also hear blowing on the solder joints. Maybe he's just blowing fumes away, but blowing ON a hot joint is not a good idea.
私が翻訳者を使ったことがあるので、言葉を許してください。
ブリッジサドルなどの金属部分をきれいにするのにどんな製品を使っていますか？
I use a metal polish called pikal, which is popular in Japan.
楽しそう。
ブラックボディーってアンダーコートなしの黒一発塗装なんですね
あ、アンダーコート吹いてます。透明なのを吹いてる時が中塗りです。
順番的には、目と目シーラー、センディングシーラー、着色、クリア塗装になります。
塗装中にカメラを回すのをためらって全部写してません。
なるほど〜
私のソニックブルー号は白、濃いめのブルー、そしてソニックブルーの3層です。あ、クリアーもかな？
黒はアンダー塗装を透かすことがほぼないのでカラーは一層ですね。
Artist Model ? - Yes, looks like Stevie Ray Vaughn signature on the headstock.
you did a great paint job, very good
It's a Jimmie Vaughan signature
I didn't know who the artist model was.
Thank you for teaching me.
No not an Artist model. Its a Fender Strat. Made in Mexico
Jimmy Vaughan would approve...
i like it very nice 。。。。。。
6:49 am I in the mirror room💧💧
Sorry I don't know English. All the more difficult
@@Andybassguitar "6:49 鏡像が部屋だと思った" My best translation
すげー!
Very time consuming , no wonder guitar refinishes / set ups cost so much !🎸😎
Oh no! You painted with black such a beautiful grain?
You even polish the whatchamadingers and the thingamajigs. That's what I call meticulous.
this is just a refin, the guitar was perfect, also a restoration is for instruments that really really need it
Beautiful grain, pity. Great work tho!
ジミボン
I can see why the customer wants it refinished. Man, that's an ugly color!
Thank you!
Marc Morgan No doubt. I have three Fenders in the house and not one is that fugly tobacco sunburst nastiness.
@@tfdharley1360 Same here. I've got six strats in my house, not one of them in sunburst.
Why would you strip off the beautiful sunburst for Black? Black is the worst color, so many black instruments out there. Plus this was a nitrocellulose finish!!!
I thought you didn't like sunbursts.
Don't like black guitars.
Why remove all the finish just to paint it black? Lots of unneccesary work when all you needed to do was scuff sand then paint!
In the case of guitar refinish, all paint is stripped and then repainted. This is refinish.
Painting over paint is not good for sound.