1. you only need 1 bat and 1modul. no2. if you attempt to use more batt. just make it pararel and connect to 1 modul. also add minimum 5ohm 1/4 watt resistor on each led, the only downside by using multiple battery with 1 modul is very long charging time. no3. if you insist using 1 battery and 4 led as a load the battery will be quickly drained.
Ügyes munka, nekem nem jutott volna eszembe ez a megoldás... A LED és az Aluminium lemez közé viszon (Arctic vagy Xigmatek) hővezető pasztát raktam volna.
so...... a 3Watt LED being driven through a quarter watt resistor ???? thats gonna fry!!! oh and some heat sink compound wouldnt have gone amiss either.
Cutting that charging module was unusual but innovative. Nice work.
Thank u so much...1 saal se jo sawal thha o aaj mil gaya ...
3.7 v battery me led k liye konsa resistance lagana h ????
Ans 3 ohm
I love the hack with cutting the tp4056 board in half! Brilliant!!
super
im starting to realise that i defineatly found the channel that i like the most.
Great. And no annoying music.
That's great! If you made one with a reed switch it could become more waterproof. Next project could perhaps be a diving light??
Injection se jo torch banaya hai kahan se aur kaise mangwa
Amazing!! I have a silly question, what does the blue cable work for??
"Battery minus" for recharge
Soldering iron is way too hot. Control with a dimmer switch to a few degrees above melting point of the solder. This will preserve the tip.
Really good and simple project. Nice 👍job. Brother where did you get this bulb cell charging module. Is any websit Or online selling?.
See video description
Did u manage to use 3w led in your light? Do they stay cooler cuz they're made for aquarium? I found the 1w hi power led adequate for my needs.
TT
Sir can i ask if i use 4 led, is this means i must put 4 18650 and the same tp4056 charging module?...
1. you only need 1 bat and 1modul.
no2. if you attempt to use more batt. just make it pararel and connect to 1 modul. also add minimum 5ohm 1/4 watt resistor on each led, the only downside by using multiple battery with 1 modul is very long charging time.
no3. if you insist using 1 battery and 4 led as a load the battery will be quickly drained.
At 3:09 a dab of heatsink paste will improve reliability.
KHz dish
How will you solve the heat problem without led driver?
I have everything i needed. I have a whole basement filled with random things from tissue paper to cleavers.
how bright is this sir?...
I love this channal nice
Can you make railway signaling torch
Led lens সহ বাকী কম্পোনেন্টগুলো কই পাবো?
Bhai ye lens online mil jayenge kya ab
Yeh Jo Apne LED ke aage lagaya hai woh Apne kahan se kharida tha uski bhi video Banaye
See video description
No diode?
Which resister used in this flashlight
Why do you use a resistor?
Because 3.7v too much for the 3.0-3.4v led
How many degrees is the lens
Very Very Nice Bhai
Amazing....t
Where did you get the lens??
Ügyes munka, nekem nem jutott volna eszembe ez a megoldás...
A LED és az Aluminium lemez közé viszon (Arctic vagy Xigmatek) hővezető pasztát raktam volna.
Very nice
Can we use 1 AAA battery to light up 3 led lights?
If you use the small one's and put them in parallel, I guess so
Good bro
Hello bro you making channel in diy with your voice i am excited to listen your voice when you finished making the channel please post it
Really nice, man. :)
super
and withoutthat charging module cannot make flashlight?...
Yes, you can but needs to open it and charge battery apart.
i made a lot of small led flashlight with usb charger a samsung battery a switch and a very bright led without this small circuit and is good
Resistance
Value
Great
Bhai edit kis software sai kartai ho
Do how to make night vision goggles PLS😉
holaDe cuánto grados es el lente?
Muy bueno.
Thanks a lot for the information about item to buy
How to connect if I don't have out + - on my charging module
What resistor did you use?
+1
Awesome ❤️
Nice
Bhai 3 ohm nhi hoto 4 ya 10 ohm chal jayegi kiya Resistance
A very long time to upload a video
Bro how you have connected the cell you didn't mention it please teach me again
Where is Led chip module link???????
hehe I made the same installation. I reuse an old lamp wich had some useless solar charging and a dead NiMh battery
I would add a USB boost converter
in 4:11 how you making a module?
nice
awesome
why no music?
so...... a 3Watt LED being driven through a quarter watt resistor ???? thats gonna fry!!! oh and some heat sink compound wouldnt have gone amiss either.
Alatnya beli dimanaya
tokopedia banyak bro, TP4056 module, 3W high power LED, resistor, tombolnya self locking switch
@@JuraganLED kalo tujuan murni diy ok, tapi kalo tujuan berhemat lebih murah beli senter cree q5 (kw) cuma
meteriels is verry expincive
Animesh Halder. Lol its cost 2$ at maximum if you choose right market:)
150 to 200 RS
Это наглядное пособие
Plz make vape.
نائس
You send me torch
Please reply 😮😮😮☺☺☺😂😂😂😂
Tafree
Please reply👋👋👋👋👋😣😣😣😣
Lamest solders i've ever seen.
Not 3watt ,only 1 watt
nice