Build the 1:8 Scale Batmobile Tumbler from Hachette Partworks - Part 53-58
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- This is now a full product run from Hachette Partworks available in the UK at
batmobile.hachettepartworks.com/
This 1:8 scale vehicle from the Christopher Nolan Dark Knight Trilogy is now available to build from the folks over at Hachette Partworks.
00:00 - Introduction
01:24 - Stage 53 - The Inner Bulkhead
04:06 - Stage 54 - Upright Crossbars and Connectors
06:11 - Stage 55 - The Floor of the Front Sections
09:45 - Stage 56 - Mounting, Pistons and Shock Absorbers
13:08 - Stage 57 - The Engine Panel
14:17 - Stage 58 - The Roof
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my channel at
PATREON : / worldofwayne
TH-cam MEMBERSHIP : bit.ly/WowMembership
----------------------------------------------------------------------------------------
My Social Media, Merchandise and Amazon store can be found at :
www.linktr.ee/worldofwayne
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#batman #tumbler #batmobile #thedarkknight - แนวปฏิบัติและการใช้ชีวิต
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. Did you know, you can now support World of Wayne by joining the channel membership program at bit.ly/WowMembership and get exclusive features for TH-cam. Alternatively, you could join my Patreon for $1 and still get access to member live streams and behind the scene news. My patreon channel can be found at www.patreon.com/worldofwayne . Thank you all for your continued support. I really appreciate it
Like video
I really like the charring on the exhaust pipes and on the turbine cone. They're little details that make a difference when you look at it close up :)
Seeing the size of the afterburner in your hand gives a good idea of just how gigantic the finished vehicle will be.
I'm expecting big things from this...
Ah it’s the little things in life that make us laugh right Wayne! 🤣
Hi Wayne! Greetings from Italy🇮🇹👋👋. We in Sicily have sun every day 😂😂. Congratulations on the construction, you are a few numbers ahead of me. 👏👏👏 If you try to join the rear bulkhead to the frame you will realize the exact length of the model. Think about it!! beyond the front wheels there is nothing left as well as beyond the exhaust cone. Greetings👋👋
*LOL* In the intro I thought you were pointing at your head Wayne, and I thought 'Has he polished it? Ohhh the yellow round thing in the sky.. yeah what's that about? And why is the sky that funny blue colour?' (Yes, I live in Wales *lol*)
Love this build so much wish they would bring this back and for the U.S as well
Yes I would love this in the US, I'm subscribed to the 66 batmobile and this would be great.
@@josephconstante1222 I would do the batmobile but currently I'm doing r2d2, Nissan, E.T, and Eleanor
Looks really good wayne hope you and the family are good x
Getting .much better now. Always seem to get ill between Jan and March lol
It's starting to look good Wayne....it's about time mate. P.s great video.
Yeah, you can still get this from the website, you can subscribe, or order any issue up to 55.
It’s going to be good when complete but like you said some stages very little to do I think they were just trying to spread it out over a given amount of stages which sometimes leaves you wanting more
Great vid and build
I see when you had the frame in the cockpit from issue 54 it says to add 2 screws to secure it but I found them impossible to fit, looking at your video you didn't bother fitting them either
Yer. Didn't bother at all
Batmobile tumbler
How did you secure the bracket inside without the screws (which I can't figure out anyway)?
As any time i try putting the bracket into the front it falls apart
Then when i tried to secure the front onto the frame with the screws in the bottom it falls off the bulkhead.
As the back frame is wobbly, even though i tightened it as much as i could.
👋 nice work. So how much in total would estimate the complete cost of this project? Hope you do t mind me asking.
Most of these models come on around £1200
Great build Wayne 👍🏻
What's with those cable ties on the suspension Wayne?
I had anpart break off. I have glued it back in
I like the idea of using paper and cardboard for the packages, it's more environmental friendly.
Yeah cutting down trees is very environmentally friendly 👍
Technically Ghostbusters 5 but 4 if you feel the 2016 movie was a really bad joke
Hi Wayne!
So im building this one too and I cannot for the life of me see how the front suspension will work?
Im not up to that issue here yet, I can see that there are two copper coloured springs above the frint suspension arms.
I cant see how they spring the whole setup as the small arms that come up to meet those springs are loose on the lower suspension arms?
Ive followed everything correctly so far (at least I think I have?) and I still cant see how it works?
A bit vague without photos I know, I trust it works out somehow?😊
Cheers mate.
Yer the suspension is more of a "for show" I don't think it practically does anything
@@WorldofWayneUK thanks!😃
If you read the instructions the bracket inside the front needs to be secured with screws
Yep. That's pretty impossible I gave up on that lol. I would need a really tiny screwdriver or a right angled one
@@WorldofWayneUK I was scratching my head at that stage, came back to re watch your video to see if i had missed how you did it...ordered myself a right angled ph0 from Amazon, should be here today.
Hi Wayne could you tell me what glue u use on this build please and we're to purchase it from
It's a brush on glue from the Range stores in the UK
Whats it called Wayne as this is totally new to me,this is my first ever build @@WorldofWayneUK
Its just called Glue It. You have to go in store as its not online. Alternatively Gorilla brush on glue is available from Amazon
@@mickpurcell272
Where did you get that shirt?
It was from a company called hubcloset that sadly no.longer exist
You can still get it but it is not on offer
Take it you didn't do the BM screws in the cowl to hold the plastic frame,no way in hell you can get them in there anyway
Nah
Ritengo che aumentate il prezzo di 1 euro a metà dell'opera sia scandaloso visto che poi per molti numeri ci danno solo 1 pezzo x giustificare 120 uscite
If this was the only model you were building, would you be pee'd off at these 'stages' with so little to do?
Yep.
This is a weird looking vehicle even by Batman standards. It has pistons and shock absorbers that don't seem to have any function at all.
Remember, the front end ejects from the car to form the Batcycle. 😉🍻
@@theduel007 Good point
@@milanondrak5564 🍻😉