That's how it's supposed to be, The way I see it, is the task itself should be easy and smooth so you can concentrate on the music and not be bogged down in the technical side of things
A lot of great and useful information here Jon. I haven't seen a video on Newtime yet, which could prove useful for solving timing issues. For this one, a before and after comparison would've made this great tutorial even better.
Check out automation step editing mode. SHIFT+clicks will then add automation points of type Hold. And, if Snap is set to other than None, ALT will disable snapping.
Thanks! One thing I'm really curious of is if Hold has a very small fade built into it. It seems like it might because it doesn't have nearly the pops/clicks that pro tools has when automating.
@@jonaudio i think that automation updates the target at the rate of project PPQ. Smoothing can be set in either the Controller Link dialog, or the target parameter has smoothing handled within the plugin. An IL official recently said, somewhere on the forum, that Fruity Balance doesn't apply smoothing internally. To know for sure, one could bounce down something like a sine tone with dramatic volume automation of Hold style. Open the render in an audio editor and look to see if there are ramps, or significant jumps in values between sample points. i did a steppy Fruity Balance volume automation on a test tone and found there were pops. Pops are possible with one or two milliseconds' worth of smoothing, so visual analysis of the waveform would be conclusive.
Addenda: i just now performed the visual test. There is indeed a ramp on Fruity Balance volume change automated by points of type Hold. It seems to be longer for larger volume jumps.
Thank you so much for looking into that!!! I really appreciate you doing that. That's good to hear because Hold is such a convenient automation type and since it has fades, it makes the work flow that much faster!
@@jonaudio My pleasure, glad to repay the learning i've sourced from your channel. In the case of this video, i learned a huge quality of life aid. Specifically, how to create a point on a line!
you're very welcome! So basically once you have your gain stages set, this happens afterwards because we're putting fruity balance on the insert and automating the gain knob there. Usually if you have an EQ and a compressor on the inserts before fruity balance, most of the track should be in the ball park, then once you get to automating the gain knob of fruity balance, it shouldn't be huge moves, but rather keeping the vocal sitting right where you want it.
yo, the thing you do with pressing shift, riht clicking and and then drag two points at the same time dosent work for me! Please tell me why! Amazing video btw.
Man very helpful tutorial but can you help me, when i press shift and right click the level of the whole automation goes up or down, how can i fix this .. this shortkey don,t work for me
Sounds good and all but how do you get past your stupid knobs running to full volume every time you touch literally anything outside the mixer... only to not respond to literally anything the way yours does... despite doing it really stupid slow... Or did 21 chance everything?
You'll get a quicker result for sure, but using automation and compression together, you'll get a much better and more precise result without having to let the compressor to the entire work
Yep it gives more accurate results and let's you decide how much signal you want to push into the Compressor. I mix this way for lots of different track and not such vocals. It gives lots of control and to get everything balanced exactly how you want it. Lets say you want a cool guitar lick pushed a little more in the mix than other stuff, this is perfect for that occasion
Yep it sure can be, but the more and more you do, you get faster and better at it and doesn't really feel that tedious and sometimes can be fun getting the vocal to sit exactly where you want it thru the entire track
Using a limiter would get you close but if you do it by hand like this, you'll get a better result since you're not relying on an automatic process. Also limiters and Compressors sometimes won't catch everything so it's nice to do it by hand first and then run it into a Compressor for the finishing touches
Damn...this some top secret area 51 shit...too bad fl 21 came out with its easier process. Wish I knew this from when I cracked....I mean bought fl....lmao!😂😂😂😂
Which "easier process" are you reffering to? Link pls, because I thought this was genius but if there's something newer now then I want to know. Imagine if FL had some built in like what Nectar 4 and Waves Vocal Rider do.
Best vocal automation video iv'e come across so far, absolute legend!
that's awesome to hear!! thank you!!
underrated comment to an underrated video of an underrated mixing technique
This helped so much I was feeling so frustrated because I was doing so much clicking. This makes it doable. Thanks.
That's great to hear! You're very welcome!
You're the only one to cover this topic, well done
Thank you so much!!
Fantastic. Just what i needed. I think this is one of the best tutorials ive seen. Very clear directives, and not redundant at all. Thanks bro
That's awesome to hear!! You're very welcome 🤙🤙
Wow, those are some awesome tips. Mindblowing how easy automating volume is with that method
That's how it's supposed to be, The way I see it, is the task itself should be easy and smooth so you can concentrate on the music and not be bogged down in the technical side of things
Facts
A lot of great and useful information here Jon.
I haven't seen a video on Newtime yet, which could prove useful for solving timing issues.
For this one, a before and after comparison would've made this great tutorial even better.
A before and after comparison would have been a good thing to have included, good point! I could probably do something on newtime soon no problem
awesome video man!!
Thank you so much for this beautiful in-depth tutorial.
The best "Automotion Volume" on youtube thx
You're very welcome!
Check out automation step editing mode. SHIFT+clicks will then add automation points of type Hold.
And, if Snap is set to other than None, ALT will disable snapping.
Thanks! One thing I'm really curious of is if Hold has a very small fade built into it. It seems like it might because it doesn't have nearly the pops/clicks that pro tools has when automating.
@@jonaudio i think that automation updates the target at the rate of project PPQ. Smoothing can be set in either the Controller Link dialog, or the target parameter has smoothing handled within the plugin. An IL official recently said, somewhere on the forum, that Fruity Balance doesn't apply smoothing internally.
To know for sure, one could bounce down something like a sine tone with dramatic volume automation of Hold style. Open the render in an audio editor and look to see if there are ramps, or significant jumps in values between sample points.
i did a steppy Fruity Balance volume automation on a test tone and found there were pops. Pops are possible with one or two milliseconds' worth of smoothing, so visual analysis of the waveform would be conclusive.
Addenda: i just now performed the visual test. There is indeed a ramp on Fruity Balance volume change automated by points of type Hold. It seems to be longer for larger volume jumps.
Thank you so much for looking into that!!! I really appreciate you doing that. That's good to hear because Hold is such a convenient automation type and since it has fades, it makes the work flow that much faster!
@@jonaudio My pleasure, glad to repay the learning i've sourced from your channel. In the case of this video, i learned a huge quality of life aid. Specifically, how to create a point on a line!
Love your enthusiasm, great, helpful video. keep em coming my guy!
Thanks! Glad it was helpful for you, I got lots of videos on the schedule coming up.
Awesome
oh are u here to move
Thanks so much for this video , i understood that this is vocal automation, but is this adapt the gan stage as well ?
you're very welcome! So basically once you have your gain stages set, this happens afterwards because we're putting fruity balance on the insert and automating the gain knob there. Usually if you have an EQ and a compressor on the inserts before fruity balance, most of the track should be in the ball park, then once you get to automating the gain knob of fruity balance, it shouldn't be huge moves, but rather keeping the vocal sitting right where you want it.
Thanks so much ❤
yo, the thing you do with pressing shift, riht clicking and and then drag two points at the same time dosent work for me! Please tell me why! Amazing video btw.
What version of FL are you running?
@@jonaudio 21! But It workes now:) thanks to one of the comments. Think it was that the mode wasent on hold.
Glad to hear it's working now!! Thats great news!
Man very helpful tutorial but can you help me, when i press shift and right click the level of the whole automation goes up or down, how can i fix this .. this shortkey don,t work for me
hmm, what version of FL are you running and do you by chance have typing to keyboard turned on?
Fl 20,no i don`t have it turned on...@@jonaudio
hey man is there a way to do batch fading on vocals??
Super clutch
Does anyone else know why my shift right-click shortcut is not functioning? I have the latest update on fl20
Hmm not sure why that is. Have you installed the new FL21 instead of FL20? That may solve your issue
@@jonaudio yeah I tried that and it works now so thanks! Was very weird tho coz i remember it used to work ages ago but yeah
Sounds good and all but how do you get past your stupid knobs running to full volume every time you touch literally anything outside the mixer... only to not respond to literally anything the way yours does... despite doing it really stupid slow...
Or did 21 chance everything?
I'm a little confused on what you mean, could you explain a little more on what's happening on your end during automation?
@@jonaudio it's not on you I was being a bit snarky cause it was funny to me. I'll try to make a video in a bit cause describing it is a bit tough.
All good my man, I'm just curious what is happening on your end, if you make the video send it to me and we'll figure out what's happening
Can't tiu achieve this quicker with compression?
You'll get a quicker result for sure, but using automation and compression together, you'll get a much better and more precise result without having to let the compressor to the entire work
@@jonaudio interesting.. so lighter compression settings along with this technique is a recommend? How else do you use automation and why?
Yep it gives more accurate results and let's you decide how much signal you want to push into the Compressor. I mix this way for lots of different track and not such vocals. It gives lots of control and to get everything balanced exactly how you want it. Lets say you want a cool guitar lick pushed a little more in the mix than other stuff, this is perfect for that occasion
it is can change pitch a vocal?
This is changing the volume of the vocal
Volume automation for vocals is a tedious task eish
Yep it sure can be, but the more and more you do, you get faster and better at it and doesn't really feel that tedious and sometimes can be fun getting the vocal to sit exactly where you want it thru the entire track
How do i make my vocals outline light like that ?
What do you mean exactly?
FL Studio 21😏😎😎😎
But your trick is still useful and cool! Thanks
it will get you some good results, just remember to do this process before it gets compressed
just use limiter?
Using a limiter would get you close but if you do it by hand like this, you'll get a better result since you're not relying on an automatic process. Also limiters and Compressors sometimes won't catch everything so it's nice to do it by hand first and then run it into a Compressor for the finishing touches
Speed up x1.5 and thank me later
Don't speed up shii, the video has nice and necessary Info's that you shouldn't miss
Thank you
Cool thanks a lot
You're very welcome!
Damn...this some top secret area 51 shit...too bad fl 21 came out with its easier process. Wish I knew this from when I cracked....I mean bought fl....lmao!😂😂😂😂
Which "easier process" are you reffering to? Link pls, because I thought this was genius but if there's something newer now then I want to know. Imagine if FL had some built in like what Nectar 4 and Waves Vocal Rider do.
Thank you so much for this beautiful in-depth tutorial.
You're very welcome!! 🤙🤙