Hey bill I have the AP 932 snack machine and my door light won’t come on. I have changed bulbs twice? Are there any fuses I should check or starters? Thank you!
There should definitely be starters right near the bulbs. There should also be a ballast/transformer for the lights as well....unless it was converted to LCD.
@@towershafer501 Here's a link to the manual for your machine...you're right, I don't see any starters in the manual. There is an option to shut down the lights through programming...so you may want to check that out on your machine. If not...get a volt meter and check for voltage going to the ballast. www.dsvendinginc.com/images/vending-machine-manuals/automatic-products-rmi/AP_931_932_933_934_936_manual.pdf
I have left two comments I don’t know if it’s TH-cam or you but there is a website you can get LED lightbulbs that are plug and play so you don’t have to rewire your machine, message me I’ll give you the link. I have used it on all three Dixie narco machines that I own.
If you are using plug and play bulbs, the ballast still needs to work. I like the direct wire ones because you no longer need to worry about the ballast.
Can you believe i was buying my bulbs from an ace hardware near me for 8$ each because they were on clearance. I never had to buy more than i needed, NOBODY else knew or had anything that used them, is my guess. 😂
@@HappyVending you’d think that but then you have to store them, not to mention drive them home. Besides there wasn’t anyone else buying them. I did buy them all in the end.
Bill I installed najax card readers after you said it was a good idea to put it on, now I have one that never operated at all Pay the monthly fee call customer service, without answers it’s been 11 months and 20 days the warranty is about run out ?? ? Any connection between you and those najax people can help with this horrible card readers experience?
You haven't been able to get any help with a new reader for 11 months? When i have issues with a new reader, I contact my sales rep. Did you try contacting the person who sold you the readers? How many did you buy? Is only 1 not working? Does it have signal?
@@HappyVending yes, it a signal and go through all the procedure and after a minute just cancel, I have try in another AP studio and goes through take the card but then it doesn’t not active the selection and you lost your $1.50? I bought 3 of them. Very very dissatisfied.
Good Video Bill! Your right the machines always look better and professional when all the lights work as they should. I converted mine to LED lights.
Just bought 2 of these machines, awesome videos to teach me😃
I'd love to get your insight as to how you installed the Nayax reader in its current position. I am having a hard time seeing how to install in there.
This video explains it: th-cam.com/video/YhyGPnRsSlo/w-d-xo.htmlsi=5V80TMQrwqLAtcQv
Hey bill I have the AP 932 snack machine and my door light won’t come on. I have changed bulbs twice? Are there any fuses I should check or starters? Thank you!
There should definitely be starters right near the bulbs. There should also be a ballast/transformer for the lights as well....unless it was converted to LCD.
@@HappyVending no starters next to the bulb and the ballast looks brand new. Thank you for your time
@@towershafer501 Here's a link to the manual for your machine...you're right, I don't see any starters in the manual. There is an option to shut down the lights through programming...so you may want to check that out on your machine. If not...get a volt meter and check for voltage going to the ballast. www.dsvendinginc.com/images/vending-machine-manuals/automatic-products-rmi/AP_931_932_933_934_936_manual.pdf
I have a vendo 669. And it doesn’t have bulbs. And it makes it look out of order… do you know what bulbs it needs?
Probably similar to this machine. Just contact Vendo and ask one of the techs. Then go to an electric supply place and order a couple.
I wonder if the T12 bulbs are being phased out. A lot of people replace them with the more efficient T8 ballasts. Others are going LED.
Probably. I know phillips doesn't make these anymore.
Does anyone know where I can buy these… Having lots of trouble finding some online
I get them from my local electric supply company. If they don't have them in stock, they order them for me.
Don’t have as much room on a royal 500 series. Not sure what to do
As much room for what? To change the bulbs?
Great video!
How much you charge for soda and chips?
1.50 for cans and .85 for chips.
yea i changed out my light bulbs for led fixtures.
Two ten dollar led light fixtures.
@@ryansobel9447 The direct fit LED fixtures with the high output connectors unfortunately costs more than ten dollars.
I have left two comments I don’t know if it’s TH-cam or you but there is a website you can get LED lightbulbs that are plug and play so you don’t have to rewire your machine, message me I’ll give you the link. I have used it on all three Dixie narco machines that I own.
Nyled
Luminaries
.
If you are using plug and play bulbs, the ballast still needs to work. I like the direct wire ones because you no longer need to worry about the ballast.
Com
Can you believe i was buying my bulbs from an ace hardware near me for 8$ each because they were on clearance. I never had to buy more than i needed, NOBODY else knew or had anything that used them, is my guess. 😂
For that amount I would have bought them all.
@@HappyVending you’d think that but then you have to store them, not to mention drive them home. Besides there wasn’t anyone else buying them. I did buy them all in the end.
Bill I installed najax card readers after you said it was a good idea to put it on, now I have one that never operated at all Pay the monthly fee call customer service, without answers it’s been 11 months and 20 days the warranty is about run out ?? ? Any connection between you and those najax people can help with this horrible card readers experience?
You haven't been able to get any help with a new reader for 11 months? When i have issues with a new reader, I contact my sales rep. Did you try contacting the person who sold you the readers? How many did you buy? Is only 1 not working? Does it have signal?
@@HappyVending yes, it a signal and go through all the procedure and after a minute just cancel, I have try in another AP studio and goes through take the card but then it doesn’t not active the selection and you lost your $1.50? I bought 3 of them. Very very dissatisfied.
@@nery200043 are all three not working or just the one? You can send nayax support an email to initiate a service request.