Step-by-Step Guide to Building a Transformer Winding, core and frame.

Step-by-Step Guide to Building a Transformer Winding
Expert Techniques for Optimal Results
The procedure for building a high voltage transformer winding can be summarized into the following steps:
Gather materials: You will need insulated wire, a winding form, insulation paper, electrical tape, and other materials specific to your design.
Design the winding: Determine the number of turns, wire gauge, and layer arrangement required for your desired voltage output.
Prepare the winding form: Clean and wrap the form with insulation paper to prevent short circuits.
Wind the primary coil: Start winding the primary coil around the form, making sure to maintain consistent spacing and layering. Secure the end of the wire with electrical tape.
Add insulation: Place a layer of insulation paper between each layer of wire to prevent short circuits.
Wind the secondary coil: Repeat the process of winding and insulating the secondary coil, making sure to keep the coils separate and properly spaced.
Finish winding: Secure the end of the secondary coil with electrical tape and place additional layers of insulation paper over the entire winding.
Test the winding: Test the winding for continuity and correct voltage output to ensure that it is functioning properly.
Install in transformer: Install the winding in the transformer body, connecting it to the appropriate terminals and insulating all connections.
It's important to follow proper safety precautions while constructing a high voltage transformer winding, such as wearing protective gear and avoiding contact with live wires.
उच्च वोल्टेज वाइंडिंग का विन्यास करने की कदम के कदम प्रक्रिया:
सामग्री एकत्र करें: आपको इंसुलेटेड वायर, वाइंडिंग फॉर्म, इंसुलेशन पेपर, इलेक्ट्रिकल टेप और अन्य सामग्रीयों की जरूरत होगी।
वाइंडिंग का विन्यास करें: आपके इच्छित वोल्टेज आउटपुट के लिए टर्न्स, वायर गेज और लेयर व्यवस्था की आवश्यकता निर्धारित करें।
वाइंडिंग फॉर्म तैयार करें: फॉर्म को साफ़ करें और शॉर्ट सर्किट्स को रोकने के लिए इंसुलेशन पेपर से ढकें।
प्राथमिक कॉयल वाइंड करें: फॉर्म पर प्राथमिक कॉयल वाइंडिंग
transformer winding,
transformer winding machine,
transformer winding calculation,
transformer winding resistance test, transformer winding data,
transformer winding tamil,
transformer winding malayalam,
transformer winding machine price, transformer winding kaise karen,
transformer winding connection
#TransformerWindingConstruction #HighVoltageWinding
#LowVoltageWinding
#StepByStepProcedure
#ElectricalEngineering
#PowerEngineering
#TransformerDesign
#WindingTechniques#transformers
#electrical
#transformerwindingmachine

[@arzu752]

Bohot acha videp hai
Please ek video Automatic Voltage Controller pe bhi bnaiye.
AVC ki wiring kese hoti hai

[@electricala2zhindi]

Ok

[@aamirbassali2696]

Welldone sir very nice work.

[@electricala2zhindi]

Thanks

[@mvthummar7181]

Very good

[@electricala2zhindi]

Thanks

[@narinderkaursandhu5096]

Very nice ❤

[@electricala2zhindi]

Thanks for subscribing

[@anuragtiwari4181]

Sir hum jo electrical engineering mein transformer design calculations study karte hai kya woh actually mein wohi calculation use hote real design ke waqt?
Theoretical calculation = actual calculations?

[@electricala2zhindi]

Theory concepts ke liye sahi hai
Actually me thoda different hota hai.
Nai technology ke chalte thoda fark padta hai.

[@kalpanashrestha9786]

Wow good job🎉🎉🎉🎉🎉🎉

[@electricala2zhindi]

Thanks

[@Bhargavrj18]

Superb👍

[@electricala2zhindi]

Thanks 🙏🙏🙏

[@poshtotechnicaleducationwi1171]

سر نیند میں ویڈیو بنایا تھا کیا 🙏🙏🙏

[@electricala2zhindi]

Thanks

[@hpadhan]

Sir eski turn per volt kitna lagega kese calculate Kiya jata hai

[@electricala2zhindi]

Input current aur voltage ke hisab se output me milega
Turn ratio is important factor

[@vedprakashgupta1493]

Bahut acha video hai

[@electricala2zhindi]

Thanks for comment 🙂
Dusra konsa topics chahiye?

[@AsifBaloch-wv6ks]

Hu​@@electricala2zhindi

[@AsifBaloch-wv6ks]

Hy

[@VirajsinhSodhaparmar]

🎉

[@ranaabhishek8163]

Trafarmer में kitne parkar ke wending hote hea

[@electricala2zhindi]

HV and LV
Some Transformers HV, IV and LV
As per design.

[@ranaabhishek8163]

@@electricala2zhindi sir trasfarmer me kon si wending hoti hea

[@saoudiyoussef4839]

What causes the temperature of the electrical transformer to rise?

[@electricala2zhindi]

Addicurrent and histerisisloss

[@saoudiyoussef4839]

it has a rigid impedance which does not allow strong short circuit currents to pass without reducing the kW power

[@saoudiyoussef4839]

part of the solution you can find in the manufacture of single-phase transformers such as coated foil magnetic circuits

[@madhumadasu3303]

It is hv or lv winding

[@electricala2zhindi]

Both HV and LV
THANKS FOR COMMENT

[@jssguru3376]

Sir apne vedio to kafi useful banaya lekin thoda gla khakar k banate to achcha lgta

[@electricala2zhindi]

😊😊😊

[@sehajpalsingh2624]

Sir yah kitna kv ka transformer hota ha

[@electricala2zhindi]

Ye distribution tr hai
Power tr bada hota hai.

[@Luxurylifedream]

Nice

[@electricala2zhindi]

Thanks 🙏🙏

[@Rohit3969]

Mijhe yah kam sikhna h

[@AnkitKumaratan]

nice

[@electricala2zhindi]

Thanks

[@umeshsolanki6211]

HV side delta connection to dikhaya hi nahi

[@electricala2zhindi]

Ok next time

[@rameswarchandrawanshi2315]

सर काम हाय हेल्पर मनून

[@electricala2zhindi]

Thanks

[@anoopsharma21]

Now you have to give some correct information. There is a lot that needs to be told to you properly. Your effort was very good but you need to give a lot of correct information.

[@electricala2zhindi]

Thanks

[@foryoutubeg1219]

👍

[@electricala2zhindi]

Thanks

[@prashantparab9438]

Mai 100 kv ,200 kv transfarma banate

[@electricala2zhindi]

Thanks dear

[@prashantparab9438]

@@electricala2zhindi apki kha company hai

[@yashpal983]

Kya khak achchha lag raha hai

[@electricala2zhindi]

Fir kaisa video chahiye

[@foryoutubeg1219]

👍🌸👈

[@electricala2zhindi]

Thanks 👍

[@Singh-mw6sy]

Any transformer technician looking for job kindly contact me.

[@electricala2zhindi]

Ok, 👌

[@Singh-mw6sy]

I have power job and distribution jobs
Looking for assembler winder and full team

[@saoudiyoussef4839]

You are making electrical transformers the wrong way

[@electricala2zhindi]

What is wrong

[@saoudiyoussef4839]

you have too much magnetic leakage

[@AsifBaloch-wv6ks]

H🎉🎉🎉🎉🎉❤❤❤

[@electricala2zhindi]

Thanks 👍😊😊

[@Himan7197]

Bhai honey peeyo thoda ..kch jyaada harsh voice hai😅

[@electricala2zhindi]

Ok, bro

[@dkkrishnastudio]

Hi🎉🎉🎉🎉🎉🎉#dkkrishnastudio

[@luisavila5192]

No se te entiënde nada !!!

[@electricala2zhindi]

Thanks

[@eazylife5447]

Nice

[@hetalvaghela6636]

Nice
Good
Video
#hetaldailylife